• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.260-268
• /
• 2013

Based on classical Berotti discrete iron loss calculation model, the iron loss analysis mathematical model of alternator was proposed in this paper. Considering characteristics of high speed and changing frequency of the alternator, Maxwell 3-D model was built to analyze iron loss corresponding to each running speed in alternator. Based on iron loss model of alternator at rated speed, the rotor claw pole size was made an optimization design. The optimization results showed that alternator's output performance had been improved. A new idea was explored in size optimization design of claw pole alternator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.72-74
• /
• 2021

The deep learning process currently utilized in various fields consists of data preparation, data preprocessing, model generation, model learning, and model evaluation. In the process of model learning, the loss function compares the value of the model with the actual value and outputs the difference. In this paper, we analyze various loss functions used in the deep learning model for biomarker extraction, which measure the degree of loss of neural network output values, and try to find the best loss function through experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.8
• /
• pp.437-444
• /
• 2014

In this paper, we propose a path loss model with the multiple antennas and doppler shift for high speed railroad communication. Path loss model is very important in order to design consider diverse characteristic in high-speed train communication. Currently wireless communication systems use the multiple antennas in order to improve the channel capacity or diversity gain. However, until recently, many researches on path loss model only consider geographical environment between the transmitter and the receiver. There is no study about path loss model considering diversity effect and doppler shift. In order to make average residuals considering doppler shift we use tuned free space path loss model which is utilized for measurement results at high speed railroad. The environment of high speed rail is mostly at viaduct and flatland over than 50 percent. And in order to make average residuals considering multiple antenna we use theoretical estimation of diversity gain with MRC scheme. proposed model predict loss of received signal by estimating average residuals between diversity effect and doppler shift.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.278-287
• /
• 2024

In this paper, telemetry link budget model for small launch vehicle is proposed, and telemetry link budget simulator is implemented. The proposed link budget model consist of geometry model and propagation loss model. The geometry model is calculation of look angle between ground station and small launch vehicle. The propagation loss model consist of free space loss, polarization loss, and de-pointing loss which are appropriate to the small launch vehicle flight environment. The proposed propagation loss model can be calculate propagation loss without complex calculation of propagation environments. The link budget simulator is implemented in MATLAB. The simulator calculate look angle, free space loss, polarization loss parameter, de-pointing loss and received signal level in ground station by using position of ground station, routing of small launch vehicle, 3-D radiation patterns of antennas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1306-1313
• /
• 1999

In this paper, we propose the signal strength path loss model (modified Hata path loss Model) and the signal strength distribution model (log-normal distribution) for the cell design of the land mobile communication system. We applied the measured experimental data at Soosungdon and Sanjuckdong in Daeku, to this model and calculate the fraction of total area above threshold.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.116-121
• /
• 2020

With the recent development of the 4th Industrial Revolution, efforts have been made to carry out communication in a smart factory, farm, etc. at low cost and reliably. Methods for utilizing empty frequencies using TVWS(TV White Space) have been studied which can be used locally within 30 km. However, there have not been many studies on Path-Loss model considering Korean environment. In this paper, the Path-Loss model is divided into LOS (Line Of Sight) and NLOS (None LOS). In case of LOS model, we checked the difference between Free space model, Friis model, 2-ray model and Hata model with measured data. In the case of NLOS model, we checked the difference between Lee Model, ITU-R526-3 Model with measured data. In order to overcome the difference in Korean environment, we derived a model that can be applied in LOS and NLOS and prove its usefulness through performance evaluation through simulation.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.10-17
• /
• 2012

This paper presents an improved iron loss model, for the computation of the no load iron loss in the stator core of the in-wheel permanent magnet synchronous motors (PMSM), for the cases of with and without stator skew. 2-D analytical model is used for the computation of tooth and yoke flux densities of the in-wheel PMSM. The no load iron loss computed by the improved iron loss model, for the cases of with and without skew is compared with the finite element method (FEM) and the results show good consistency.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.3
• /
• pp.33-38
• /
• 2010

In this paper, the nature of iron loss in electrical steel during alternating field excitation is investigated more precisely. The exact definition of AC iron loss is cleared by accurately measuring the iron loss for conditions of both the sinusoidal magnetic field and sinusoidal magnetic flux density. The results of this approach to iron loss calculations in electrical steel are compared to experimentally-measured losses. In addition, an inverse hysteresis model considering eddy current loss was developed to analyze the iron loss when the input is the voltage source. With this model, the inrush current in the inductor or transformer as well as the iron loss can be calculated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.10
• /
• pp.1247-1254
• /
• 2004

In momentum exchange theory the loss models for the circulatory flow is critically important. But because of lack of loss model on the circulatory flow, analysis model on regenerative turbomachines is not available in the open literature. In the present study circulatory loss is evaluated by combining bend's losses. Through the comparison with the previous experimental data on linear pressure gradient, a combination factor is suggested in terms of the aspect ratio of a channel. Applying this factor to two kinds of regenerative blowers the predicted results are found to be in good agreement with the experimental data of the overall performance and the head distribution along the rotational direction. Especially, the comparison with the head distribution demonstrates the accuracy of hydraulic model and loss model suggested in the present study. And the comparison with the overall performance confirms the validness of physical models as well as loss models suggested in the present study.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.204-209
• /
• 2001

The finite element model for automotive muffler analysis is improved by modifying the boundary condition of outlet and the mesh of finite element model. The model minimizes the difference between transmission loss from analysis and that from experiment. Four different boundary conditions and the four types of finite element model are tested to find out the best one of those. From the case study it is verified that the bevel of transmission loss can be changed by the variation of radiation impedance value. Also the resonance or anti-resonance frequencies of transmission loss can be shifted by the variation of finite element mesh. An improved finite element model of muffler is proposed in consideration with the accuracy and the computing time of analysis.