• Analytical Science and Technology
• /
• v.17 no.2
• /
• pp.145-152
• /
• 2004

In this study, analytical characteristics of S gas detection technique were investigated against four major reduced S compounds (including hydrogen sulfide; methyl mercaptan; dimethyl sulfide (DMS); and dimethyl disulfide (DMDS)). To analyze such properties, an analytical system was constructed by combining the GC/PFPD system with the loop injection method. The results of our analysis indicated that response behavior of S gases differs greatly between compounds; H2S exhibited the weakest sensitivity of all compounds, while DMDS with two S-atom compounds the strongest sensitivity. To learn more about their response behavior on GC/PFPD method, their calibration patterns were compared using the three arbitrarily set concentration ranges of low, intermediate, and high. The results showed that calibration patterns of each compound are distinguished because of different factors. There was a line of evidence that calibration of $H_2S$ was affected noticeably by adsorptive loss within the system, whereas those of DMS and DMDS were influenced most sensitively by such factor as the linearity response at a given PMT voltage setting. The overall results of our study suggest that quantification of malordorous S compounds require a better knowledge of compound-specific response behavior against GC detection.

• Journal of Animal Science and Technology
• /
• v.58 no.9
• /
• pp.35.1-35.10
• /
• 2016

Background: The aim of this work was the comparison between the carcass and the meat ewes of the regional Traditional market and the Islamic religious (Halal) market. Methods: Thirty and 20 at the end of career traditional market and Halal market ewes were slaughtered following the EC (European Council, 2009) animal welfare guidelines. Live weight of ewes was taken and dressing percentage of carcasses was calculated. On every carcass zoometric measurement and the evaluation trough the EU grid rules were performed. On the Musculus longissimus thoracis of 12 Traditional market carcasses and 11 Halal market carcasses the physical-chemical and nutritional analysis were performed. Consumer tests for liking meat ewe were performed in order to find consumer's preference level for Traditional and Halal markets ewe meat. Considering as fixed factor the ewe meat market (Traditional and Halal), results were submitted to oneway Analysis of Variance (ANOVA) and to Principal Component Analysis (PCA). Results: The Halal market ewes have shown lower dressing percentages ($42.91{\pm}0.82$ vs $46.42{\pm}0.69$) and lower conformation score ($4.5{\pm}0.5$ vs $7.8{\pm}0.4$). The Halal market meat showed higher cooking loss in oven ($37.83{\pm}1.20$ vs $32.03{\pm}1.15%$), lesser Chroma value ($18.63{\pm}0.70$ vs $21.84{\pm}0.67$), and lesser Hue angle value ($0.26{\pm}0.02$ vs $0.34{\pm}0.02$). This product had also lower fat percentage ($4.2{\pm}0.4$ vs $7.09{\pm}0.4$). The traditional market meat had higher percentage in monounsatured fatty acids (MUFA) ($43.84{\pm}1.05$ vs $38.22{\pm}1.10$), while the Halal market meat had higher percentage in ${\omega}3$ poliunsatured fatty acids (PUFA) ($5.04{\pm}0.42$ vs $3.60{\pm}0.40$). The consumer test showed as the ewe meat was appreciate by the consumers. Conclusions: Both meat typologies have shown good nutritional characteristics. The traditional market meat had higher MUFA composition, and a better MUFA/satured fatty acids (SFA) ratio, while the Halal market meat had higher PUFA composition. These results were also supported by the PCA. The consumers preferred the traditional market meat.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.122-130
• /
• 2016

The past few decades of industrialization enabled human-centered stream developments, which in turn resulted in constructing straight or covered streams, which are used only for sewage disposal purpose. However, these types of streams have become the cause of flood damages such as localized heavy rain. In response, various construction methods have been implemented to prevent stream and embankment damages. However, regulations regarding these measures only lay out minimum standards such as the height of slopes and the minimum angle of inclination. Moreover, examination of tractive force, the most crucial factor in preventing flood damage, is nonexistent. Therefore, this study evaluates various tractive forces by implementing a porous concrete tetrapod at a full scale artificial stream for experiment, controlling the rate of inflow, and measuring the velocity and depth of the stream under different experiment conditions. The test results of the compressive strength, and porosity and density of rock of the porous concrete tetrapod was between 16.6 and 23.2 MPa, and the actual measurement of air void was 10.1%, thus satisfying domestic standard. The result of tractive force experiment showed a limiting tractive force of $47.202N/m^2$, not satisfying the tractive force scope of $67N/m^2$ the stream design working expertise proposes. However, there was neither damage nor loss of blocks and hardpan. Based on previous researches, it can be expected that there will be resistance against a stronger tractive force. Therefore, it is necessary to conduct another experiment on practical limiting tractive force by adjusting some experimental conditions.

• Korean Security Journal
• /
• no.28
• /
• pp.57-77
• /
• 2011

Recently, property and life loss is increasing internally and externally, due to fire spread in high-rise buildings which results from a variety of disasters like fire and terror. In this study, therefore, an evacuation simulation was performed to predict escape behaviors of occupants and assess escape safety in high-rise office buildings after setting up each scenario, as part of safety measures for high-rise buildings. Based on the results and data obtained, escape safety was assessed, finally. The results and suggestions of this study are as follows. Firstly, most of the present researches on high-rise building and multiple-use facilities are weighted towards qualitative perspectives. It is, therefore, considered that we have to establish concrete, practical, systematical and rational safety measures to minimize damages in dangerous situations, by analyzing security plans for high-rise buildings in depth and preparing for those situations from various angles. Secondly, setting up evacuation sections in security plans for high-rise buildings is an important factor which influences refuge. Thirdly, in relation to security plans for high-rise buildings, it is possible to reduce the entire time for escape, by setting up escape exits of each floor in consideration of a simultaneous evacuation situation.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.691-700
• /
• 2002

Interstitial therapy using biodegradable polymeric device loaded with anticancer agent can deliver the drug to the tumor site at high concentration, resulting in an increase of therapeutic efficacy. 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU, carmustine) is most commonly used as chemotherapeutic agent for brain tumors. The design of implantable device is regarded as an important factor lot the efficient delivery of antitumor agent to targeting site. In order to control the release profile of drug, the release pattern of BCNU with the changes of various dimension and additives was investigated. The PLGA wafers containing 3.85, 10, 20 and 30% of BCNU were prepared in various shape (diameter of 3, 5 and 10 mm, thickness of 0.5, 1 and 2 mm) by direct compression method. In vitro drug release profile of BCNU-loaded PLGA wafers could be controlled by changing the dimension of wafers such as initial drug content, weight, diameter, thickness, volume and surface area of wafers, as well as PLGA molecular weight and additives. Drug release from BCNU-loaded PLGA wafers was facilitated with an increase of BCNU-loading amount or presence of poly(N-vinylpyrrolidone)(PVP) or sodium chloride (NaCl). The effects of various geometric factors and additives on the BCNU release pattern were confirmed by the investigation of mass loss and morphology of BCNU-loaded PLGA wafers.

• The Plant Pathology Journal
• /
• v.26 no.4
• /
• pp.313-320
• /
• 2010

Genetic instability of the rice blast fungus Magnaporthe oryzae has been suggested as a major factor underlying the rapid breakdown of host resistance in the field. However, little information is available on the mechanism of genetic instability. In this study, we assessed the stability of repetitive DNA elements and several key phenotypic traits important for pathogenesis after serially transferring two isolates though rice plants and an artificial medium. Using isolate 70-15, we obtained a total of 176 single-spore isolates from 10 successive rounds of culturing on artificial medium. Another 20 isolates were obtained from germ tubes formed at the basal and apical cells of 10 three-celled conidia. Additionally, 60 isolates were obtained from isolate KJ201 after serial transfers through rice plants and an artificial medium. No apparent differences in phenotypes, including mycelial growth, conidial morphologies, conidiation, conidial germination, appressorium formation, and virulence, or in DNA fingerprints using MGR586, MAGGY, Pot2, LINE, MG-SINE and PWL2 as probes were observed among isolates from the same parent isolate. Southern hybridization and sequence analysis of two avirulence genes, AVR-Pita1 and AVR-Pikm, showed that both genes were also maintained stably during 10 successive generations on medium and plants. However, one reversible loss of restriction fragments was found in the telomere-linked helicase gene (TLH1) family, suggesting some telomere regions may be more unstable than the rest of the genome. Taken together, our results suggest that phenotype and genotype of M. oryzae isolates do not noticeably change, at least up to 10 successive generations on a cultural medium and in host plants.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.17-33
• /
• 2004

Korea's economic development plans instituted in the 1970's, affected by the growth centered policy and rapid industrialization, have prevailed without having aviation safety management system, along with the safety of the other various means of transportation, settled in its place, and subsequently, the aviation accidents occurred until the beginning of year 2000 have incurred an enormous social expense, not to say of a massive loss of human lives. Especially, with regard to the causal factors of accidents, most of recent accidents have been associated with human factor of airmen, thus, only if this can be detected in advance and prevented, the aircraft accident rate will be reduced by a large margin. Therefore, in order to develope improvement methods on the safety system of civil aviation, in this study, safety management system has been divided into three stages: an advance preventive system, a handling system at an accident's occurrence and a post accident handling system, and thereby improvement methods on aviation safety have been suggested for each stage. The threatening factors agatinst aviation safety have been found to be the absence of management standards and regulations, the indifference to or the lack of the law abiding apirit as major factors, and in order to improve on which, it is required that the settlement of the institutional safety management system should precede, and that the Government and the aviation industry should also make a continuous effort to identify the threatening factors against aviation safety, and to provide incentives for the law abiding spirit and the attitude of giving top priority to safety to spread among all the employees.

• Korean Journal of Materials Research
• /
• v.19 no.1
• /
• pp.28-32
• /
• 2009

Silicon carbide (SiC) is a promising material for power device applications due to its wide band gap (3.26 eV for 4H-SiC), high critical electric field and excellent thermal conductivity. The Schottky barrier diode is the representative high-power device that is currently available commercially. A field plate edge-terminated 4H-SiC was fabricated using a lift-off process for opening the Schottky contacts. In this case, Ni/Ti dual-metal contacts were unintentionally formed at the edge of the Schottky contacts and resulted in the degradation of the electrical properties of the diodes. The breakdown voltage and Schottky barrier height (SBH, ${\Phi}_B$) was 107 V and 0.67 eV, respectively. To form homogeneous single-metal Ni/4H-SiC Schottky contacts, a deposition and etching method was employed, and the electrical properties of the diodes were improved. The modified SBDs showed enhanced electrical properties, as witnessed by a breakdown voltage of 635 V, a Schottky barrier height of ${\Phi}_B$=1.48 eV, an ideality factor of n=1.04 (close to one), a forward voltage drop of $V_F$=1.6 V, a specific on resistance of $R_{on}=2.1m{\Omega}-cm^2$ and a power loss of $P_L=79.6Wcm^{-2}$.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.3 s.58
• /
• pp.623-629
• /
• 1997

This is cross-sectional study to evaluate a potential relationship between air conduction hearing threshold and blood viscosity in normal adult males(n=1677). We measured hearing threshold in frequency level at 500, 1000, 2000, 4000Hz by pure-tone audiometry and RBC profiles containing red cell number, hemoglobin, hematocrit. Blood viscosity are replaced by hematocrit that are one major factor of influencing blood viscosity. PTAs(pure-tone averages) are measured by hearing threshold averages level at 500Hz, 1000Hz, 2000Hz. Grades of PTAs(pure-tone averages) are divided three groups that are less then 10.0dB group, between 10.0-19.9dB group and excess 20.0dB. The results shows significant association among hematocrit, red cell number and hearing loss(age adjust by ANACOVA).

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.458-467
• /
• 2002

There has been proposed many simplification algorithms for effectively decreasing large-volumed polygonal surface data. These algorithms apply their own cost function for collapse to one of fundamental simplification unit, such as vertex, edge and triangle, and minimize the simplification error occurred in each simplification steps. Most of cost functions adopted in existing works use the error estimation method based on distance optimization. Unfortunately, it is hard to define the local characteristics of surface data using distance factor alone, which is basically scalar component. Therefore, the algorithms cannot preserve the characteristic features in surface areas with high curvature and, consequently, loss the detailed shape of original mesh in high simplification ratio. In this paper, we consider the vector component, such as surface orientation, as one of factors for cost function. The surface orientation is independent upon scalar component, distance value. This means that we can reconsider whether or not to preserve them as the amount of vector component, although they are elements with low scalar values. In addition, we develop a simplification algorithm based on half-edge collapse manner, which use the proposed cost function as the criterion for removing elements. In half-edge collapse, using one of endpoints in the edge represents a new vertex after collapse operation. The approach is memory efficient and effectively applicable to the rendering system requiring real-time transmission of large-volumed surface data.