• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.3
• /
• pp.26-36
• /
• 1997

An single stage AC/DC converter based on half bridge topology suitable for low power level applications is proposed. The proposed converter has high power factor, low harmonic distortion, and tight output regulations. Asymmetrical control and synchronous rectification are adopted to reduce the switching loss and rectification loss, respectively. The modelling employing average modelling method and detailed analysis are performed to derive the design equations. According to these design equations, a prototype converter has been designed and experimented. This prototype meets the IEC 555-2 regulations with near unity power factor and high efficiency.

• Journal of radiological science and technology
• /
• v.15 no.2
• /
• pp.31-36
• /
• 1992

Grids can improve the diagnostic quality of chest radiography by trapping the greater part of scattered radiation thus providing more detailed. chest radiographic images. It is most effective mathod of reduce the scatter ratio but must increase the expour factor. The benefit of use of grid is improve the contrast and the loss is increase of patient dose. In chest radiography especially hard quality high voltage radiography it will have to be considered to select the optimum grid with view point of benefit and loss. In this experiment, author got some result of characteristics about 4 different grids with film method. 1. There was no difference the scatter ratio in case of no grid and the scatter ratio was about 60%. 2. 16 : 1 grid was excellent of scatter reduction factor in high voltage chest radiography, next was 10 : 1, CROSS, MICRO FINE grid have low scatter reduction rate compare to 16:1, 10:1 grid. 3. The bucky factor of CROSS grid in accordance of kVp was find out the highest in 4 grids, on the contraly 10 : 1 grid was profitable to the exposure does. 4. With careful consideration in the point of scatter reducion rate and bucky factor, author suggest the 10 : 1 linear grid on the use of chest radiography in $80{\sim}120\;kVp$, 16 : 1 grid in $120{\sim}140\;kVp$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.117-123
• /
• 2007

This paper is about the economic analysis of the replacement of electric facilities in the production facilities. As the interest of energy is increasing, the efficiency of facilities become more important. So, in this paper, we diagnosed facilities, especially electric motors, in the plant and calculated the operating efficiency, power loss with the load factor. And when we replace these facilities into high-efficiency motors, we also calculated new energy efficiency, energy loss and economic analysis through capital recovery factor. As a result, we economically proved that using high-efficiency motor is more beneficial than using non-high-efficiency motors in the model process.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.34-36
• /
• 2008

This paper is given a full detail of mathematical analyses of input current for novel active type power factor correction(PFC) AC-DC converter of step up-down added electric isolation. These are compared with harmonics components of input current for a conventional PFC converter of electric isolation type. The proposed PFC converter is constructed in using a new loss-less snubber circuit to achieve a soft switching of control device. Also the proposed converter for discontinuous conduction mode(DCM) eliminates the complicated circuit control requirement and reduces the size of components. The input current waveform in the proposed converter is got to be a sinusoidal form of discontinuous pulse in proportion to magnitude of ac input voltage under the constant duty cycle switching. Therefore, input power factor is nearly unity and the control method is simple. Particularly, the stored energy of loss-less snubber capacitor is recovered with input side and increases input current from resonant operation. The result is that input power factor of the proposed converter is higher than that of a conventional PFC converter. Some simulative results on computer and experimental results are included to confirm the validity of the analytical results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.3
• /
• pp.182-188
• /
• 2001

A solenoid-type MEMS inductor with a quality factor over 10 at 2 GHz has been developed using an electroplating technique. The integrated spiral inductor has a low Q factor due to substrate loss and skin effects. It also occupies a large area compared to the solenoid-type inductor. The direction of flux of the solenoid-type inductor is parallel to the substrate, which can lower the substrate loss and other interference with integrated passive components. To estimate the characteristics of the proposed inductor over a high frequency range, the 3D FEM (Finite Element Method) simulation is used by using the HFSS at the Ansoft corporation. The electroplated solenoid-type inductor is fabricated on a glass substrate step by step by using photolithography and copper electroplating. The fabrication process to improve the quality factor of the inductor is also developed. The achieved inductance varies within a range from 0.5 nH to 2.8 nH, and the maximum Q factor is over 10.

• Journal of Information Technology Services
• /
• v.6 no.3
• /
• pp.163-177
• /
• 2007

This research is the concept of a game addiction absorbed in the game based on the review and analysis of factors that affect the characteristics of game addiction, it is appropriate to extract the purpose of factors. Game addiction factor is composed of a total of 32 questions, and a total of 356 people, to collect data through surveys. Factor analysis of the collected data to the target as a result of physical and mental problems, loss of control, tolerance, and avoidance of real world consists of three sub-factors. Factors that affect flow of tolerance and loss of control, and avoid the real world, including two sub-factors that could determine. Diagnostic game addiction factor in the reliability coefficients (Cronbach alpha) is a robust .966 aspects in the event. The game addiction scale score of 90-game addiction by category 'regular user', 90 points and 114 between the terms 'potentially dangerous user' and 13 percent of the overall. Finally, more than 115 points in the 'high-risk user' has been classified as 5% of the overall distribution of the notice that. Such factors extract game is a game addict, addicted users of the game and tend to properly evaluate and navigate game addiction-related problems early in the game addiction and found it could be used properly.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.14-20
• /
• 1998

Cutting fluid is a factor which has big effects on both machinability and environment in machining process. The loss of cutting fluids may be reduced by the optimization of machining parameters in process planning. In this study, the environmental impact of fluid loss is analyzed. The fluid loss models in milling process are constructed with the machining parameters. The models are utilized to obtain the optimal machining parameters to minimize the fluid loss. The factors with significant effects on the fluid loss are analyzed by ANOVA test. Finally, optimal parameters are suggested considering both machining economics and environmental impact. This study is expected to be used as a part of a framework for the environmental impact assessment of machining process.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.166-169
• /
• 2017

This paper describes atmospheric phenomena and effects for satellite-to-ground laser communication channel. Satellite laser communication has advantages such as very high bandwidth, inherent security, robustness to electromagnetic interference, unlicensed frequency band. However, satellite laser communication is affected by various factors. Transmission quality is degraded by factors as system loss, geometric loss, misalignment loss, atmospheric loss. Atmospheric loss is major factor of performance degradation. In this paper, the atmospheric phenomena such as absorption, scattering and turbulence are discussed and analyzed for developing satellite laser channel model and laser transmission scheme robust to atmospheric phenomena.

• Journal of Power System Engineering
• /
• v.20 no.6
• /
• pp.71-79
• /
• 2016

This paper introduces the design method of the centrifugal turbo fan and the process of developing the design program of it. The developed design program confirmed the applicability by experimental performance data. Here, we proposed new velocity coefficients and considered various losses such as impeller inlet loss, vane passage flow loss, casing pressure loss, recirculation loss power, and disk friction loss power. Especially, the inlet and outlet widths of the impeller were newly determined by reflecting the experimental results. As a result, this fan design program shows a good performance result regardless of the types of impeller and is expected to be a very useful design tool.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.87-92
• /
• 2011

In this paper, we got the 800 ~ 900 MHz path loss model for Russia PNG area using the free space model and the Okumura-Hata Model. In order to add new regional properties to the existing path loss model, the mean square error technique is used to obtain the correction factor. The correction factors for the free space and the Hata model are 28, 13 dB respectively. By applying this correction factors, the new Russain PNG path loss model is proposed.