• 전기학회논문지
• /
• 제61권9호
• /
• pp.1269-1274
• /
• 2012

In this paper, the iron loss was calculated using estimated iron loss coefficient at 650W Interior Permanent Magnet Synchronous Motor(IPMSM) and 250W IPMSM. The iron loss coefficients was estimated different according to electrical steel material used to stator and rotor core in motor. Aspect of The rotating flux field and alternating flux field was confirmed by magnetic field behavior and harmonic analysis in stator core, the iron loss was calculated using flux density by Finite Element Method(FEM) and estimated coefficients by iron loss coefficient estimation proposed in this paper. The iron loss experiment was performed for verified to iron loss calculation, and the iron loss coefficients were verified by comparison of iron loss calculation value and experimental value.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1409-1414
• /
• 2013

A new calculation method for iron loss coefficients is proposed by using the Steinmetz equation from Epstein data. The hysteresis loss must have linear characteristic according to the frequency. However, the existing iron loss coefficients are defined by formula of frequency. In this case, the hysteresis loss has non-linear characteristics by frequency. So, in this paper, the iron loss coefficients were defined by a function of the magnetic flux density, and the iron loss calculation is applied for Interior Permanent Magnet Synchronous Motor(IPMSM) of 600(W) and 200(W). The iron loss calculation results and the experimental results are compared according to the various materials.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.447-458
• /
• 2009

Energy loss at manholes, often exceeding friction loss of pipes under surcharged flow, is considered as one of the major causes of inundation in urban areas. Therefore, it is necessary to analyze head loss at manholes, especially in case of surcharged flow. Hydraulic experiments were conducted with three cases. Case A is to test whether the shapes of the manholes influence head loss coefficients. Case B and C were proposed to further reduce head losses by improving the manhole hydraulic efficiency. In case B, the joining part of the pipe at both shapes of manholes is shifted from central part to side part. The test in case C is to check the average head loss coefficient by installing the side benching in square manhole, based on shifted joining part model. The average head loss coefficient for circular and square manhole on case A was 1.6. This did not show much difference of the head loss coefficients in spite of the discharge variation in this case. However, case B and C show large difference between head loss coefficients due to the strong oscillation of water surface and the horizontal swirl motion. The circular and square manholes in case B reduced the head loss by 30% and 6% than ones in case A, respectively. The average head loss coefficient for circular manhole in case B was 1.1. Case C reduced average loss coefficients of the square manhole in case A from 1.6 to 1.1. Accordingly, the circular manhole in case B and the square manhole in case C showed the effective way to reduce the head loss. These head loss coefficients could be available to apply to the urban sewer system with surcharged flow.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.254-259
• /
• 1996

The hydraulic tests for 16$\times$16 JDFA were performed to obtain the pressure loss coefficients using the FACTS. The pressure loss coefficients are calculated by converting the each properties of experimental values for inlet region, mixing vane grid, outlet region and core region by performing a power fit of the pressure loss coefficient values to the corresponding Reynolds number. The test results are compared with the existing calculated values and evaluated by using the CALOPR code in terms of pressure drop. It is turned out that the differences between the test results and the calculated values are about by 3.8% for the pressure loss coefficients and by 8.5% for the pressure drop.

• 대한토목학회논문집
• /
• 제38권3호
• /
• pp.395-406
• /
• 2018

도시유역의 침수해석에 널리 사용되는 XP-SWMM 모형은 맨홀을 하나의 절점(node)으로 간주하여 과부하 맨홀에서 발생하는 국부 손실의 영향을 고려하지 못하기 때문에 침수 면적(범위)을 과소 산정한다. 그러므로 XP-SWMM을 이용한 침수해석 시 과부하 맨홀에서의 국부손실을 고려한 손실계수의 적용성 분석이 필요한 실정이다. 본 연구에서는 내수 침수피해가 빈번히 발생하는 도림천 유역의 도림1 배수분구를 활용하여 맨홀 형태 및 손실계수 적용 유무에 따른 침수면적의 변화를 비교 분석하였다. 침수모의 결과, 손실계수를 고려한 경우가 고려하지 않은 경우보다 실제 침수면적과의 일치율이 약 17% 증가하였다. 또한 중간맨홀 및 합류맨홀($90^{\circ}$접합, 3방향 및 4방향 접합 맨홀)에 따른 각각의 손실계수를 적용하여 침수 해석한 결과 중간맨홀의 손실계수만을 적용한 것과 유사한 결과가 도출되었다. 그러므로 도시지역의 침수지역을 정확하게 모의하기 위해서는 과부하 맨홀에서의 손실계수를 고려한 2차원 침수해석을 수행하여야 할 것으로 판단된다. 본 연구의 연구결과는 도시지역의 침수 위험지역을 파악하기 위한 기초적인 자료로 활용이 가능할 것으로 판단된다.

• 한국수자원학회논문집
• /
• 제48권2호
• /
• pp.127-136
• /
• 2015

일반적으로 XP-SWMM은 맨홀을 하나의 절점으로 간주하여 절점의 형상과 크기에 따른 국부손실의 영향을 고려하지 못하기 때문에 침수면적을 과소 산정한다. 그러므로 과부하 맨홀 내에서의 손실계수를 고려한 해석 방안 및 손실계수의 적용에 따른 침수해석에 관한 연구가 필요하다. 본 연구에서는 유량변화 및 맨홀 형상 변화에 따른 수리실험을 실시하여, 과부하 맨홀(원형, 사각형)에서의 손실계수를 각각 0.61과 0.68로 산정하였다. 또한 XP-SWMM을 이용하여 군자배수분구를 대상으로 산정된 손실계수의 적용 유무에 따른 침수면적의 변화특성을 분석하였다. 분석 결과 손실계수를 적용하면 침수면적이 3.5ha 증가하는 것으로 나타났다. 이는 손실계수 적용에 따라서 맨홀에서의 월류량이 증가하기 때문이다. 대상유역에 손실계수를 적용하였을 경우 실제 침수면적과의 일치율은 약 58%로 나타났으며, 손실계수를 고려하지 않았을 경우의 일치율은 약 40%로 나타났다. 그러므로 과부하 맨홀에서의 손실계수를 고려한 2차원 침수해석의 결과는 도시지역의 침수 위험지역을 정확하게 파악하기 위한 기초적인 자료로 활용이 가능할 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제27권1호
• /
• pp.39-45
• /
• 2003

As the size of a combustor decreases to a MEMS scale, heat loss increases and becomes a dominant effect on the performance of the devices. Existing models, however, are not adequate to predict the heat transfer and combustion processes in such small scales. In the present study, a semi-empirical model to calculate heat loss from a micro combustor is described. The model derives heat transfer coefficients that best fits the heat loss characteristics of a micro combustor that is represented by transient pressure record after combustion is completed. From conservation of energy equation applied to the burned gas inside the combustor, a relationship between pressure and heat transfer is reduced. Two models for heat transfer coefficients were tested; a constant and first order polynomial of temperature with its coefficients determined from fitting with measurements. The model was tested on a problem of cooling process of burnt gas in a micro combustor and comparison with measurements showed good agreements. The heat transfer coefficients were used for combustion calculation in a micro vessel. The results showed the dependence of flame speed on the scale of the chamber through enhanced heat loss.

• 대한기계학회논문집B
• /
• 제20권4호
• /
• pp.1501-1509
• /
• 1996

Differential pressure devices such as an orifice and Venturi are widely used in the measurement of flow rate of fluid mainly due to cost effectiveness and easy installation. In the current study, the viscoelastic effect on discharge and loss coefficients of those flow meters were investigated experimentally. Aqueous solutions of Polyacrylamide (200, 500, and 800 ppm) as viscoelastic fluids were used. Discharge coefficient of an orifice for viscoelastic fluids increased significantly up to approximately 15-20% when compared with that for water, while loss coefficient decreased up to 10-25% depending on the diameter ratio, .betha.. Also, pressure recovery for viscoelastic fluids was extended much longer than that for water. On the other hand, discharge and loss coefficients of Venturi for viscoelastic fluids were found to be strongly dependent on the Reynolds number. In both flow meters, the concentration effect for discharge and loss coefficients was not observed at more over than 200 ppm of aqueous solution. Conclusively, orifice and Venturi flow meters should be calibrated very carefully in the flow rate measurement for viscoelastic fluids.

• 상하수도학회지
• /
• 제22권6호
• /
• pp.619-625
• /
• 2008

Urban sewer systems are designed to operate in open-channel flow regime and energy loss at square manholes is usually not significant. However, the energy loss at surcharged manholes is considered as one of the major causes of inundation in urban area. Therefore, it is necessary to analyze the head loss associated with manholes, especially in surcharged flow. Hydraulic experimental apparatus which can change the manhole inner profile(CASE I, II, III, and IV) and the invert types(CASE A, B, C) were installed for this study. The experimental discharge was $16{\ell}/sec$. As the ratio of b/D(manhole width/inflow pipe diameter) increases, head loss coefficient increases due to strong horizontal swirl motion. The head loss coefficients for CASE I, II, III, and IV were 0.46, 0.38, 0.28 and 0.37, respectively. Side covers increase considerably drainage capacity at surcharged square manhole when the ratio of d/D(side cover diameter/inflow pipe diameter) was 1.0. The head loss coefficients for CASE A, B, and C were 0.45, 0.37, and 0.30, respectively. Accordingly, U-invert is the most effective for energy loss reduction at surcharged square manhole. This head loss coefficients could be available to evaluate the urban sewer system with surcharged flow.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.170-173
• /
• 2005

The objective of this paper is to perform measurements of power transmission and reflection coefficients in a coupled plate. The coupled plate has been divided into 2 subsystems. The out-of-plane vibration has been only considered with assumption of relatively small in-plane vibration. The coupling loss factors have been measured with consideration of the power balance condition. The power transmission and reflection coefficients has been estimated from the measured values of the coupling loss factors. The measured power transmission and reflection coefficients have been compared with the corresponding theoretical coefficients in a semi-infinite coupled plate.