• 한국통신학회논문지
• /
• 제38B권7호
• /
• pp.553-563
• /
• 2013

IEEE 802.11 무선 랜 기반 방송 서비스를 제공 할 때 한정적인 무선 자원을 이용하여 다수의 사용자들에게 원활하게 서비스하기 위해 유니캐스트 패킷 대신 방송 패킷을 이용한다. 방송 패킷은 일정한 대역폭을 사용하여 다수의 사용자들에게 동시에 패킷을 전송 할 수 있지만 손실 복원이 어려운 단점 있기 때문에 손실 특성 분석을 통한 효율적인 패킷 복원 방안이 요구 된다. 손실의 특성 중에서 일정 구간에서 다수의 패킷이 연속적으로 손실 되는 구간이 있는데 이를 버스트 손실 구간이라고 한다. 평균 패킷 손실율을 가지더라도 랜덤 손실과 버스트 손실의 특성에 따라 구간별 손실에 차이가 발생하기 때문에 같은 손실 복원 기법을 적용하더라도 복원율의 차이가 발생한다. 따라서 손실의 본질을 분석 하고 이를 고려한 손실 복원 방안에 대한 연구가 필요하다. 본 논문에서는 전송률에 따른 Wi-Fi 방송 실험을 통해 생성된 실제 손실 패턴을 바탕으로 4-상태 마코프 모델을 이용하여 버스트 손실의 특성을 분석 하였다.

• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.114-119
• /
• 2009

Field test was conducted to investigate primary factors reducing rapeseed harvesting using a reciprocating cutter-bar of combine. The results showed that the correlation between crop moisture content and yield loss had a U-type, which indicated that the yield reduction increased at too high and too low crop moisture contents. The proper ranges of crop moisture contents were 27${\sim}$35%, 21${\sim}$56%, and 62${\sim}$73% in case of grain, pod and stem, respectively. Crop moisture content was negatively correlated with header loss, but positively correlated with threshing loss. In contrary, stem moisture content showed positive correlations with total loss, threshing loss and separation loss. Working speed was positively correlated with header loss. Total flow rate, pod flow rate and stem flow rate were highly correlated with threshing loss and separation loss. However, grain flow rate did not show any correlation with total loss. According to the principal component analysis, two principal components were derived as components with eigenvalues greater than 1.0. The contribution rates of the first and the second components were 52.7% and 38.9%, which accounted for 91.6% of total variance. As a contributive factor influencing total loss of rapeseed mechanical harvesting, a crop moisture content factor was greater than a crop flow rate factor. The stepwise multiple regression analysis for total loss was conducted using crop moisture content factor, crop flow rate factor and coefficient. However, the model did not show any correlation among independent and dependent factors ($R^2$=0.060).

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.23-34
• /
• 2014

With a view to analyzing the influential factors and their prioritization in association with the loss from construction disasters, this study has presented relative weighted value and importance for each category of loss by making a systematic classification of costs for non-insured categories (indirect costs) and conducting AHP analysis based on results of a survey of specialists. Through the study, first, I have divided the larger classification of loss factors into human loss factor, financial loss factor, special cost factor, and managerial loss factor, and, second, have presented prioritization of loss categories by allotting scores based on weighted values after calculating weighted value through pairwise comparison of loss levels. Based on these results of the study, we should be able to qualitatively calculate the loss costs that construction disasters inflict on business, promote rational decision-making and efficiency in spending related to a disaster, and compare it against safety investment designed to reduce disaster loss from the perspective of business strategy.

• 산업기술연구
• /
• 제19권
• /
• pp.147-154
• /
• 1999

The soil loss by rainfalls or runoffs has been one of the main environment problems in 20th century. The soil loss cause the various problems those are decreasing of the agricultural productivity, desolating of pasture land and disturbing of water flowing. Therefore, it is very important to measure properly various factors those are affecting to soil loss and to recognize a seriousness of soil loss problem. In this study, we use the USLE(Universal Soil Loss Equation) as a basic approaching way for soil loss analysis in a watershed, and the GSIS(Geo-Spatial Information System) technique is applied to evaluate for factors those are related to the USLE. The results of this study are consisted of three parts those are to build up the various topographical information that is needed for analysis of wide area soil loss by using the USLE, to evaluate the factors those are needed to the USLE, to estimate the soil loss condition of subbasin in the watershed.

• International Journal of Automotive Technology
• /
• 제4권4호
• /
• pp.165-172
• /
• 2003

This article deals with the spin loss analysis of friction drive CVTs, especially for the cases of S-CVT and SS-CVT. There are two main sources of power loss resulting from slippage in the friction drive CVT, spin and slip loss. Spin loss, which is also a main design issue in traction drives, results from the elastic contact deformation of rotating bodies having different rotational velocities. The structure and operating principles of the S-CVT and SS-CVT are first reviewed briefly. And to analyze the losses resulting from slippage, we reviewed previous analyses of the friction mechanism. A modified classical friction model is proposed, which describes the friction behavior including Stribeck (i.e., pre-sliding) effect. It is also performed an in-depth study for the velocity fields generated at the contact regions along with a Hertzian analysis of deflection. Hertzian results were employed to construct the geometric parameters and normal pressure distributions of the contact surface with respect to elastic and plastic deformations. With analytic formulations of the relative velocity field, deflection, and friction mechanism of the S-CVT and SS-CVT, quantitative analyses of spin loss for each case are carried out. As a result, explicit models of spin loss were developed.

• 상하수도학회지
• /
• 제34권3호
• /
• pp.221-230
• /
• 2020

In actual seawater desalination plant, the pressure loss due to frictional force of pipe is about 3~5 bar. Also, the pressure loss at pipe connection about 1~3 bar. Therefore, the total pressure loss in the pipe is expected to be about 4~8 bar, which translates into 0.111 to 0.222 kWh/㎥ of energy when converted into the Specific Energy Consumption(SEC). Reducing energy consumption is the most important factor in ensuring the economics of seawater desalination processes, but pressure loss in piping is often not considered in plant design. It is difficult to prevent pressure loss due to friction inside the pipe, but pressure loss at the pipe connection can be reduced by proper pipe design. In this study, seawater desalination plant piping analysis was performed using a commercial network program. The pressure loss and SEC for each case were calculated and compared by seawater desalination plant size.

• 산업경영시스템학회지
• /
• 제41권2호
• /
• pp.174-183
• /
• 2018

In the industrial fields, the process capability index has been using to evaluate the variation of quality in the process. The traditional process capability indices such as $C_p$, $C_{pk}$, $C_{pm}$ and $C^+_{pm}$ have been applied in the industrial fields. These traditional process capability indices are mainly applied in the univariate analysis. However, the main streams in the recent industry are the multivariate manufacturing process and the multiple quality characteristics are corrected each other. Therefore, the multivariate statistical method should be used in the process capability analysis. The multivariate process indices need to be enhanced with more useful information and extensive application in the recent industrial fields. Hence, the purpose of the study is to develop a more effective multivariate process index ($MC_{pI}$) using the multivariate inverted normal loss function. The multivariate inverted normal loss function has the flexibility for the any type of the symmetrical and asymmetrical loss functions as well as the economic information. Especially, the proposed modeling method for the multivariate inverted normal loss function (MINLF) and the expected loss from MINLF in this paper can be applied to the any type of the symmetrical and asymmetrical loss functions. And this modeling method can be easily expanded from a bivariate case to a multivariate case.

• Structural Engineering and Mechanics
• /
• 제88권1호
• /
• pp.13-23
• /
• 2023

Seismic risk assessment studies are one of the most crucial instruments for mitigating casualties and economic losses. This work utilizes fragility curves to evaluate the seismic risk of single-story precast buildings, which are generally favored in Marmara's organized industrial zones. First, the precast building stock in the region has been categorized into nine sub-classes. Then, seven locations in the Marmara region with a high concentration of industrial activities are considered. Probabilistic seismic hazard assessments were conducted for both the soil-dependent and soil-independent scenarios. Subsequently, damage analysis was performed based on the structural capacity and mean fragility curves. Considering four different consequence models, 630 sub-class-specific loss curves for buildings were obtained. In the current study, it has been determined that the consequence model has a significant impact on the loss curves, hence, average loss curves were computed for each case investigated. In light of the acquired results, it was found that the loss ratio values obtained at different locations within the same region show significant variation. In addition, it was observed that the structural damage states change from serviceable to repairable or repairable to unrepairable. Within the scope of the study, 126 average loss functions were presented that could be easily used by non-experts in earthquake engineering, regardless of structural analysis. These functions, which offer loss ratios for varying hazard levels, are valuable outputs that allow preliminary risk assessment in the region and yield sensible outcomes for insurance activities.

• 한방비만학회지
• /
• 제17권2호
• /
• pp.68-76
• /
• 2017

Objectives: The purpose of this study was to analyze the factors affecting weight loss effect of Gamitaeumjowee-tang and to see if weight loss could be predicted using influence factors and weight loss progress. Methods: From September 2016 to March 2017, we retrospectively reviewed the medical records of 139 patients who were visited to the Korean Oriental Clinic for 3 months. We conducted a regression analysis to determine whether age, gender, initial weight, patient health questionnaire-9, heart rate variability (HRV), sleep quality, drinking habit and the medication history of weight loss affect weight loss. We found weight loss prediction equations using multiple regression analysis applying significant factors and weight loss progress. Results: Gender and initial weight had a significant effect on weight loss in all periods (P<0.001). HRV had a significant effect on primary weight loss (P<0.01). Other factors did not have any significant effect on weight loss. Using the significant factors, weight loss of each period could be predicted from 23.9% to 44.6%, and tertiary weight loss could be predicted with 76.6% using factors, primary weight loss and secondary weight loss (P<0.001). Conclusions: This study suggests that weight loss effect of Gamitaeumjowee-tang maybe be affected by influence factors and that weight loss prediction equations using them can be used for obesity treatment.

• The Journal of the Acoustical Society of Korea
• /
• 제21권4E호
• /
• pp.164-169
• /
• 2002

This paper proposes a hybrid method for vibration analysis in the medium to high frequency ranges using Power Flow Analysis (PFA) algorithm and Statistical Energy Analysis (SEA) coupling concepts. The main part of the developed method is the application of coupling loss factor (CLF) suggested in SEA to the power transmission, reflection coefficients in PI' A boundary conditions. The developed hybrid method shows very promising results with regard to the applications for the various damping loss factors in wide frequency ranges. And also this paper presents the applied results of Power Flow Finite Element Method (PFFEM) by forming the new joint element matrix with CLF to analyze the various plate structures in shape. The analytical results of automobile, complex plate structures show good agreement with those of PFFEM using the PFA coefficients.