• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.91-96
• /
• 2010

The combination of a bolt and nut is the element most widely used for connecting machines and structures. When a load is repetitively applied in the direction right angle to the bolt axis after the bolt and nut is fastened, the nut gradually becomes loose. To solve this problem, in this study, a new type of the loose-proof nut, called a lock nut, is developed. The lock nut is equipped with a spring, and the spring increases the axial force of the bolt. Then, the connection force between the bolt and nut is also augmented. Three dimensional finite element models for the bolt and spring are generated, and the change of the axial force of the bolt while the bolt is being inserted into the spring is analyzed using MSC/Marc, a commercial finite element program. Finally, the optimum shape of the spring is found according to the response surface analysis methodology. The optimization result is verified by comparing the variation of the axial force of the bolt when the bolt is inserted to the initial and optimized spring.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권3호
• /
• pp.176-181
• /
• 2009

Synovial chondromatosis is a rare, benign, monoarticular arthropathy that is characterized by the development of highly cellular, metaplastic cartilaginous nodules in the synovial membrane. It commonly affects larger joints such as the knee, elbow, wrist, shoulder, and hip. Synovial chondromatosis of the temporomandibular joint(TMJ) is rare. Moreover, the temporal involvement of synovial chondromatosis without connection with joint is greatly rare. A 44-year-old women had experienced pain of the right TMJ area and limitation of mouth opening. MRI and CT revealed multiple calcified loose bodies and widening in right upper joint space of TMJ and osteolytic lesion in right temporal bone. Treatment consisted of removal of multiple loose bodies, resection of the osteolytic lesion through the preauricular approach. She was diagnosed with primary transitional synovial chondromatosis of TMJ with involvement of temporal bone. In spite of remaining of the loose bodies, pain and mouth opening improved and there have been no recurrence of signs and symptoms for 5 years follow up.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.27-33
• /
• 2012

This paper presents the effect of temperature on the impedance-based damage monitoring of steel-bolt connections using wireless impedance sensor nodes. In order to achieve the objective, the following approaches are implemented. First, a temperature-compensated damage monitoring scheme that includes a temperature compensation model and damage detection method is described. The temperature compensation model is designed by analyzing the linear regressions between the temperatures and impedance signatures. The correlation coefficient of the impedance signatures is selected as the damage index to monitor the damage occurrence in the target structures. Second, a wireless impedance sensor node is described for the design of the hardware components and embedded software. Finally, the performance of the temperature-compensated impedance-based damage monitoring scheme is evaluated for detecting a loose bolt in the steel-bolt connections on a lab-scale steel girder under various temperatures.

• Smart Structures and Systems
• /
• 제24권3호
• /
• pp.293-301
• /
• 2019

Bolted joints are commonly used in civil infrastructure and mechanical assembly structures. Monitoring and identifying the connection status of bolts is the frontier problem of structural research. The existing research is mainly on the looseness of a single bolt. This article presents a study of assessing the loosening/tightening health state and identifying the loose bolt by using ultrasonic guided wave in a bolt group joint. A bolt-tightening index was proposed for evaluating the looseness of a bolt connection based on correlation coefficient. The tightening/loosening state of the bolt was simulated by changing the bolt torque. More than 180 different measurement tests for total of six bolts were conducted. The results showed that with the bolt torque increases, value of the proposed bolt-tightening index increases. The proposed bolt-tightening index trend was very well reproduced by an analytical expression using a function of the torque applied with an overall percentage error lower than 5%. The developed damage index based on the proposed bolt-tightening index can also be applied to locate the loosest bolt in a bolt group joint. To verify the effectiveness of the proposed method, a bolt group joint experiment with different positions of bolt looseness was performed. Experimental results show that the proposed approach is effective to detect and locate bolt looseness and has a good prospect of finding applications in real-time structural monitoring.

• 수산해양기술연구
• /
• 제35권1호
• /
• pp.1-10
• /
• 1999

The north-west sea area of Cheju Island is where originate two layer current in the summer season. The case of the fishing operations in this sea area is almost impossible for normal expansion of the net gear for shooting net, and is happened to be frequent occasions for rise of tension suddenly in purseline by changes of the net shapes in the operation. Therefore, the safety of the operations is often obstructed by the above mentioned. In connection with the above, model experiments on the purse seine in the circulating water tank was carried out in comparison and analysis on the changes of tension in the pruseline by deformation of purse seine in the sea area of two layer current. THe results obtained are as follows;In the case of the required time for pursing of 20 minutes in the no current set, the increasing curve for tension of purseline can be expressed as:Y=0.0004x3+0.0098x2+0.3000x(r=0.9989)where Y is tension(metric tons) of a purseline, x is required time(minutes) for pursing. And, the maximum value of tension in this time was an increase of 31.3 percent at 15 minutes, and was a decrease of 30.3 percent at 30 minutes than that of 20 minutes.When the bottom margin of net is held on the position in velocity of 0.5 knot at three-eighths of net in the bottom current to the net height, the maximum tension of the required time for pursing of 30 minutes in tight set and loose set were decrease of 29.5 percent and 28.7 percent respectively than that of 20 minutes.The work load during the required time for pursing of 20 minutes were calculated 5.79×106 kgf·m in no current set, 7.89×106 kgf·m in tight set and 5.15×106 kgf·m in loose set, therefore it was an increase of 22.3 percent in tight set, and was a decrease of 11.1 percent in loose set than that of the no current set. Where tight set and loose set is a range of the bottom current with velocity of 0.5 knot at three-eighths of net to the net height.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.494-500
• /
• 2008

This paper presents the analyzed result of the series arc fault current by using the discrete wavelet transform. The series arcing is caused by a loose connection in series with the load circuit. The series arc current is limited to a moderate value by the resistance of the device connected to the circuit, such as an appliance or a lighting system. The amount of energy in the sparks from the series arcing is less than in the case of parallel arcing but only a few amps are enough to be a fire hazard. Therefore, it is hard to detect the distinctive difference between a normal current and a intermittent arc current. This paper, presents the variation of the ratio of peak values and RMS values of the series arc fault current, and proposes the novel series arc fault detecting method by using the discrete wavelet transform. Loads such as a CFL lamp, a vacuum cleaner, a personal computer, and a television, which has the very similar normal current with the arc current, were selected to confirm the novel method.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.823-824
• /
• 2016

일반적으로 배전반, 분전반, 전동기제어반(Motor Control Center;MCC)은 집단거주지역, 빌딩, 학교, 공장, 항만, 공항, 상하수 처리장, 변전소, 중공업 플랜트 등의 광범위한 전력 수용가에 설치되어 특고압의 전력을 해당 설비들에 요구되는 전압으로 변환하여 공급하는데 사용된다. 이와 같은 배전반, 분전반, MCC에 포함되는 전기설비의 사고는 부스바 접속부의 열화에 의한 사고, 부스바의 접점 및 연결 부위에서의 접촉 불량에 의한 사고, 부스바 접속부의 과열 현상에 의한 사고로 구분된다. 본 논문에서는 부스바 접촉부의 볼트 및 너트의 풀림상태, 접촉부 열화 측정이 가능하며, 배전반 내부온도와 부스바 온도를 측정하여 추이변화에 대한 감시기능이 있는 부스바 접촉부 체결상태 모니터링 시스템을 제안한다. 제안된 시스템은 정량적인 부스바 체결상태 검출과 부스바 현재온도 검출의 이중적인 센싱에 의해 부스바 접촉부 정상여부 판별이 가능하여 전기설비 사고를 줄일 수 있을 것으로 기대된다.

• 한국경제지리학회지
• /
• 제23권3호
• /
• pp.262-275
• /
• 2020

코로나19에 의한 팬데믹으로 세계 도시는 변화를 맞이했다. 글로벌 경제체계가 약해짐에 따라 상품 생산 및 유통 체계에도 지역화가 강화되는 현상이 나타났다. 또한, 지역화가 강화된 도시에서는 소비 형태가 변화했고 이에 따라 물리적 장소를 소비하는 방식도 변하고 있다. 대형 다중이용시설 소비는 대폭 감소했고, 온오프라인 경계가 허물어지는 속도가 빨라졌으며, 취향 공유를 위한 어메니티 소비는 더욱 세분화, 전문화되고, 프라이빗(private)해졌다. 도시 어메니티의 집중으로 파악되는 도시 씬에도 큰 변화가 나타났다. 도시 씬에서 로컬 스케일과 로컬리티가 중요해졌고, 공감성이라는 새로운 도시 씬 요소가 등장하였다. 공감성은 개인이 도시 어메니티를 소비함에 있어 사회적, 정서적 연결을 목적으로 하며, 연결성, 취향 소비, 노스탤지어를 추구한다. 본 연구는 공감성에 기반하며 문화 소비하는 공간을 공감적 공간이라 명명하고 그 개념을 설명하였으며, 향후 포스트코로나 상황에서 도시 씬에서의 공감적 공간의 중요성을 제시하였다.

• Journal of the korean society of oceanography
• /
• 제35권1호
• /
• pp.1-10
• /
• 2000

A two-dimensional numerical model was applied to investigate the sediment transport and sand bank formation in a macrotidal sea, the Kyunggi and Asan Bays. The tidal residual currents show quite complex pattern including counter-rotating eddies off the northwestern corner of the Dugjeok Island that reflect the promontory effect. Complex residual eddies are also present off the coast of the Taeanbando and in the Asan Bay. Net sediment transport pattern shows that sandy sediments in the Kyunggi and Asan Bays are generally transported landward from the outer sea suggesting sediment trapping inside the bays. This phenomenon may be related to the formation and maintenance of numerous sand banks in this macrotidal sea. Alternate occurrences of deposition and erosion predicted from the numerical model along the coast of the Taeanbando with strong deposition on the southwestern part of the 'Jangansatoe'(JSB), a large sand ridge off the coast of the Taeanbando appear to reflect the loose connection of JSB, The 'Joongangcheontoe', a central sand bank (CSB) with the main axis in the NW-SE direction in the Asan Bay may undergo a modification with strong deposition along the northeastern flank. These results indicate that the sand banks are actively modified and maintained by the strong tidal currents in this shallow macrotidal sea.

• 대한두경부종양학회지
• /
• 제13권2호
• /
• pp.247-250
• /
• 1997

Bronchogenic cysts are thought to be uncommon developmental anomalies. They develop from small buds or diverticuli that separate from the foregut in the formation of the tracheo-bronchial tree. They are nearly always located near the tracheal bifurcation; However, these lesions can occur anywhere along the tracheo-bronchial tree. We experienced a case of cervical bronchogenic cyst presenting sorely as an anterior neck mass in a 26-year-old woman. The neck ultrasonography showed as $1.4{\times}1.1cm$ sized hypoechoic lesion with a well-defined margin on the isthmic portion of the thyroid gland. Excision of the mass was carried out. The mass was superfical to the strap muscle and was contained within the subcutaneous tissue in the midline without any connection to the trachea. Grossly, the mass was an oval-shaped cystic lesion which measured 1.5 cm in the greatest diameter. The cyst was filled with thick, yellow, jelly-like material and the inner surface was smooth and glistening. Microscopically, the cyst showed a lining of ciliated columnar epithelium, beneath which was a loose areolar stroma containing plaques of mucous glands and mature cartilage. We thought this cervical bronchogenic cyst appeared to represent an expression of complete aberrent accessory lung bud detachment from the primitive foregut.