• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.394-396
• /
• 2006

When developing a new GPS receiver module, the essential problems are evaluation of reliable algorithms, software debugging, and performance comparison between algorithms to find optimal solution. Most GPS receiver modules nowadays use a correlator to track signals from satellites and an MCU (Micro Controller Unit) to control operations of the entire module. The problem of software evaluation from MCU is very difficult, due to limitation of MCU resources and low ability of interfacing with user. Normally, user has to expense special tool kit for a limiting access to MCU but it is also hard to use. This article introduces an implementation of a GPS receiver test bed using correlator GP2021 interfacing with ISA (Industry Standard Architecture) PC bus. This way can give user complete control and visibility into the operation of the receiver, then user can easily debug program and test algorithms. For this article, the least square method is implemented to test the hardware and software performance.

• 전기전자학회논문지
• /
• 제20권4호
• /
• pp.435-438
• /
• 2016

HEVC CABAC의 이진 산술 복호화기는 정규, 우회, 종료의 세 가지 복호화 모드에 따라 동작하고 각 모드에 따라 복호화 동작과 시간에 많은 차이가 있다. 또한 재정규화를 진행하게 되면 내부에서 피드백 루프가 발생하여 지연 시간이 길어지게 된다. 본 논문에서는 이를 해결하기 위해 재정규화가 일어날 수 있는 모든 range 값의 범위를 미리 체크하여 정규화가 일어나면 바로 range 값을 업데이트하고 모든 계산을 한 사이클 안에 수행할 수 있도록 설계하였다. 0.18 um 공정에서 구현된 이진 산술 복호화기의 최대 동작 속도는 215 MHz이며 크기는 5,423 게이트이다.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.863-871
• /
• 2003

본 논문에서는 pHEMT의 게이트 전압을 제어하여 저 위상잡음과 고 안정 특성을 나타내는 Ku-band위상 동기유전체공진 발진기를 설계하였다. 발진기를 설계에서 위상잡음에 영향을 주는 P-HEMT의 비선형소자를 선정하고 게이트 전압에 따라 최소 위상잡음을 나타내도록 최적화 시켰으며 바이어스에 따른 산란계수를 이용하여 전압제어 마이크로파 발진기를 설계한 후 안정특성을 위하여 위상동기회로를 적용하였다. 디지털마이크로파 통신시스템에 이용되는 10.75GHz의 주파수에서 동작되는 고안정 위상동기발진기는 전치분주기 형태로 제작하였으며 설계된 마이크로파 발진기는 9.17dBm 출력전력과 -88 dBc/Hz @10KHz의 위상잡음 특성을 나타내었다.

• Advances in pediatric surgery
• /
• 제4권1호
• /
• pp.74-78
• /
• 1998

Early recognition and surgical treatment of Hirschsprung's disease prevents serious mortality and morbidity from enterocolitis and obstruction. Usually this disease is characterized by a single aganglionic segment of the colon extending distally to the anal margin. In surgical treatment, the surgeon performs a frozen section biopsy to confirm whether there are ganglion cells. If there are intervening ganglionic sites in aganglionic bowel, there may be confusion in diagnosis and treatment. The authors experienced one case of total colonic aganglionosis with skip area. A transverse loop colostomy was performed on a 7 day-old male baby with colon perforation due to Hirschsprung's disease. But intestinal obstruction persisted and required two more operations to find the true nature of the disease. There were aganglionic segments from the anal margin to the terminal ileum 3.7cm proximal to the ileocecal valve. The entire transverse colon and appendix were normally ganglionated.

• 대한임베디드공학회논문지
• /
• 제11권6호
• /
• pp.325-334
• /
• 2016

Recently, Open Computing Language (OpenCL) has been proposed to provide a framework that supports heterogeneous computing platforms. By using an OpenCL framework, digital communication systems can support various protocols in a unified computing environment to achieve both high portability and high performance. This article introduces a parallel software decoder of Low Density Parity Check (LDPC) codes for China Multimedia Mobile Broadcasting (CMMB) on a heterogeneous platform. Each step of LDPC decoding has different parallelization characteristics. In this paper, steps suitable for task-level parallelization are executed on the CPU, and steps suitable for data-level parallelization are processed by the GPU. To improve the performance of the proposed OpenCL kernels for LDPC decoding operations, explicit thread scheduling, loop-unrolling, and effective data transfer techniques are applied. The proposed LDPC decoder achieves high performance by using heterogeneous multi-core processors on a unified computing framework.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2361-2370
• /
• 2000

The introduction of inexpensive cylinder pressure sensors provides new opportunities for precise engine control. This paper presents a control strategy of spark advance based upon cylinder pressure of spark ignition engines. A location of peak pressure(LPP) is the major parameter for controlling the spark timing, and also the UP is estimated, using a multi-layer feedforward neural network, which needs only five pressure sensor output voltage samples at -40˚, -20˚, 0˚, 20˚, 40˚ after top dead center. The neural network plays an important role in mitigating the A/D conversion load of an electronic engine controller by increasing the sampling interval from 10 crank angle(CA) to 20˚ CA. A proposed control algorithm does not need a sensor calibration and pegging(bias calculation) procedure because the neural network estimates the UP from the raw sensor output voltage. The estimated LPP can be regarded as a good index for combustion phasing, and can also be used as an MBT control parameter. The feasibility of this methodology is closely examined through steady and transient engine operations to control individual cylinder spark advance. The experimental results have revealed a favorable agreement of individual cylinder optimal combustion phasing.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.704-716
• /
• 2016

Small distributed generation units are usually connected to the main electric grid through single-phase voltage source inverters. Grid operating conditions such as voltage and frequency are not constant and can fluctuate within the range values established by international standards. Furthermore, the requirements in terms of power factor correction, total harmonic distortion, and reliability are getting tighter day by day. As a result, the implementation of reliable and efficient control algorithms, which are able to adjust their control parameters in response to changeable grid operating conditions, is essential. This paper investigates the configuration topology and control algorithm of a single-phase inverter with the purpose of achieving high performance in terms of efficiency as well as total harmonic distortion of the output current. Accordingly, a Second Order Generalized Integrator with a suitable Phase Locked Loop (SOGI-PLL) is the basis of the proposed current and voltage regulation. Some practical issues related to the control algorithm are addressed, and a solution for the control architecture is proposed, based on resonant controllers that are continuously tuned on the basis of the actual grid frequency. Further, intentional islanding operation is investigated and a possible procedure for switching from grid-tied to islanding operation and vice-versa is proposed.

• 대한원격탐사학회지
• /
• 제28권6호
• /
• pp.683-691
• /
• 2012

High resolution satellite images are now widely used for a variety of mapping applications including photogrammetry, GIS data acquisition and visualization. As the spectral and spatial data size of satellite images increases, a greater processing power is needed to process the images. The solution of these problems is parallel systems. Parallel processing techniques have been developed for improving the performance of image processing along with the development of the computational power. However, conventional CPU-based parallel computing is often not good enough for the demand for computational speed to process the images. The GPU is a good candidate to achieve this goal. Recently GPUs are used in the field of highly complex processing including many loop operations such as mathematical transforms, ray tracing. In this study we proposed a technique for parallel processing of high resolution satellite images using GPU. We implemented a spectral radiometric processing algorithm on Landsat-7 ETM+ imagery using CUDA, a parallel computing architecture developed by NVIDIA for GPU. Also performance of the algorithm on GPU and CPU is compared.

• 수산해양기술연구
• /
• 제36권1호
• /
• pp.12-24
• /
• 2000

The electro-hydraulic servo winch system built in a automatic tension control equipment was designed with a latent need for an advanced system in fishing operations of the inshore and coastal fishing vessels. In order to keep the constant tension condition of warp under loading, a tension control circuit was added to the servo winch system.The dynamic performance in the open loop behaviour of the designed winch system was investigated and its applicability was tested for various possibilities of load using a load generator especially developed in order to this study.The mechanical characteristics of this system is different from that of a conventional type, that is, the tension, length, line speed and drum revolution can be automatically controlled by the information from various sensors, such as torque, rpm and pressure transducers. from the experiment results, it was verified that the servo winch system has very good output and tracking behaviour for the control input signals in different operating conditions though overshoot of out 8% in the transient characteristics of torque under the load though a overshoot of about 8% in the transient characteristics of torque under the load condition can be observed when the opening of servo valve, adjustable by the input voltage between - 10 V up to 10 V, changed suddenly.Consequently, the improved fishing winch system can be effectively used as the automatic shooting and hauling equipment of low cost for small inshore and coastal fishing vessels which engage in net fishing.

• 한국전자파학회논문지
• /
• 제8권1호
• /
• pp.83-93
• /
• 1997

본 논문은 고전압 실험실에서 시변성 전자계의 측정 및 평가에 관한 것으로 전자적 외란은 주로 전력장비의 지락고장 및 개폐조작에 의해 기인되며, 전자회로와 제어장비틀은 전자방해작용에 매우 민감하다. 주어진 전자환 경에 대한 전자방해작용의 레벨을 평가하는 것은 필수적이다. 전계는 40 Hz-2oo MHz 범위의 대역폭을 갖는 전계센서로 관측되었으며, 시변성 자계는 출력이 입사신호에 직접적으로 비례하는 루프형 센서로 측정되었다. 또한 진동성 과도전류와 차단파 임펄스전압에 의해 유도된 전자방해작용의 레벨파 전자 차폐의 외함설계에 관한 정보를 주는 사변성 전자계의 주파수 성분을 고속프리에변환으로 분석하였다.