• 전기학회논문지
• /
• 제65권1호
• /
• pp.9-15
• /
• 2016

Distribution networks are operated in radial fashion during the normal state. Loop configuration is also required temporally in case of live load transfer among the adjacent feeders. Voltage angles of each substation buses are very important data in order to calculate power flow of the loop structured distribution feeders. This paper proposes substation bus voltage angle calculation method using voltage angle difference measured at the normally open tie switches. Simulation case studies using Matlab simulink have been performed to establish feasibility of proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.406-407
• /
• 2011

The closed-loop distribution system is more flexible and more reliable than radial system. If any type fault occurs, the reliability of system can be better by providing electrical energy through another distribution line. However, it needs protection device coordination of different type. Typically, it is available by using directional overcurrent relay (67). This paper gives a solution about loop protection relay modeling which can be used by the simulation tools.

• 조명전기설비학회논문지
• /
• 제15권3호
• /
• pp.35-44
• /
• 2001

본 논문에서는 배전 계통에서 여러 가지 제약조건을 만족하면서 최소 손실 구성을 찾는 문제에 루프 기반의 유전자 알고리즘을 적용하였다. 전역적인 탐색 능력이 뛰어난 유전자 알고리즘이 아크를 기반으로 하여 배전 계통 재구성 문제에 적용되었지만 비가능해가 많이 발생하여 탐색의 효율성이 떨어졌다. 본 논문에서는 루프를 기반으로 스트링을 구성하여 가능해가 될 확률을 높였고 비가능해를 가능해로 쉽게 전환할 수 있는 복구함수를 적용해 기존의 유전자 알고리즘에서 갖고 있던 단점을 극복하였다. 본 논문에서 제안한 루프 기반의 유전자 알고리즘은 32, 69 모선 시스템에서 기존의 아크 기반의 유전자 알고리즘과 비교하여 좋은 결과를 보임으로써 실제 크기의 배전 계통에 충분히 적용할 수 있을 것으로 생각된다.

• International Journal of Reliability and Applications
• /
• 제3권1호
• /
• pp.25-35
• /
• 2002

This paper presents a dynamic reliability assessment methodology for use in the safety assessment of a complex system such as a nuclear power plant. The method is applied to a dynamic analysis of the potential accident sequences that may occur during mid-loop operation in a nuclear power plant. The idea behind this approach consists of both the use of the concept of the performance achievement/requirement correlation and of a dynamic event tree generation method. The assessment of the system reliability depends on the determination of both the required performance distribution and the achieved performance distribution. The quantified correlation between requirement and achievement represents a comparison between two competing variables. It is demonstrated that this method is easily applicable and flexible in that it can be applied to any kind of dynamic reliability problem.

• 한국안전학회지
• /
• 제11권2호
• /
• pp.52-59
• /
• 1996

This paper presents a new approach for assessing the dynamic reliability in a complex system such as a nuclear power plant. The method is applied to a dynamic analysis of the potential accident sequences which may occur during mid-loop operation. Mid-loop operation is defined as an operation to make RCS water level below the top of the flow area of the hot legs at the junction with the reactor vessel for repairs and maintenance of steam generators and reactor coolant pumps for a specific time. The Idea behind this approach consists of both the use of the concept of the performance achievement/requirement correlation and of a dynamic event tree generation method. The assessment of the system reliability depends on the determination of both the required performance distribution and the achieved performance distribution. The quantified correlation between requirement and achievement represents a comparison between two competing variables. It is demonstrated that this method is easily applicable and flexible in that it can be applied to any kind of dynamic reliability problem.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.381-383
• /
• 2003

The authors have developed a solution method based on the incremental algorithm. The optimal load balance between feeders is found through the incremental algorithm with allowing the loop configuration. Therefore loops can be configured in the resulting configuration, and then we must eliminate all loops to satisfy radiality of distribution system because the distribution system is operated under radial status. But the optimal load balance through incremental algorithm is deteriorated when the loops are eliminated. In this paper, authors propose a new method which is to improve the searching procedure of path in the incremental algorithm, that is, so as not to make loop in the path configuration.

• Structural Engineering and Mechanics
• /
• 제18권3호
• /
• pp.331-342
• /
• 2004

The vibration control problem of structures with random parameters is discussed, which is approximated by a deterministic one. A method for calculating the standard deviations of eigenvalues of the closed-loop systems is presented by using the random perturbation. The method presented in this paper will not require the distribution function of the random parameters of the systems other than their means and variances. Similarly, the distribution function of the random eigenvalues will not be computed other than their means and variances. The standard deviations of eigenvalues of the uncertain closed-loop systems can be used to estimate the stability robustness. The present method is applied to a vibration control system to illustrate the application. The numerical results show that the present method is effective.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2001년도 추계학술대회 학술발표 논문집
• /
• pp.99-102
• /
• 2001

It has well known that the congestion of traffic and it's distribution. There are very important problems in the traffic control systems. In this paper, we will purpose an ITFS(Intelligent Traffic Forecasting System) which can determine the car classes and transport them to ITS(Intelligent Traffic control System). The system will be used the Inductive Loop Detector(ILD)and the Fuzzy logic and shown the effectiveness by the computer simulation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.489-492
• /
• 2007

Understanding the thermohydraulic processes in the aquifer is necessary for a proper design of the aquifer thermal energy utilization system under given conditions. Experimental and numerical test were accomplished to evaluate the relationship between the geothermal heat exchanger operation and hydrogeological conditions in the open-loop geothermal system. Sand tank experiments were designed to investigate the open-loop geothermal system. Water injection and extract ion system as open-loop borehole heat exchanger was applied to observe the temperature changes in time at injection well, extraction well and ambient groundwater. The thermohydraulic transfer for heat storage was simulated using FEFLOW for two cases of extraction and injection phase operation in sand tank model. As one case, the movement of the thermal plume was simulated with variable locations of injection and extraction well. As another case, the simulation was performed with fixed location of injection and extraction well. The simulation and experimental results showed that the temperature distribution depends highly on the injected water temperature and the length of injection time and the groundwater flow and pumping rate sensitively affect the heat transfer.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권1호
• /
• pp.7-12
• /
• 2006

This paper proposes the new voltage event detection method using the weight factor of neural network and describes control system design for the DVR(Dynamic Voltage Restorer) consisted of a rectifier and series inverter applied to 22.9kV distribution system. As this method can express the fault level of each phase, we expect the proposed method can make up for disadvantage of synchronous detection method. Also, in this paper, the control system was designed using double deadbeat controller, As it has an inner current control loop and an outer voltage control loop, we can easily limit the current level during the transient intervals by using the current control loop. Simulation and experiment are performed to prove the analysis of the voltage event detection method and double deadbeat controller.