• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.149-154
• /
• 2019

The stability of firefighting pipes is crucial in the event of an earthquake. In Korea, specification-based designs are used in accordance with NFSC. However, engineering performance-based designs are used for buildings that have special requirements. For firefighting pipes, tree type pipe networks are usually utilized in buildings; however, they are characterized by several limitations. Hence, grid type and loop type networks are being utilized lately. Earthquake-resistant designs for firefighting pipes in Korea utilize NFPA 13 as the cookbook. Nevertheless, an engineering analysis is required to verify its reliability. The NFPA 13 standard used in Korea is a design method for engineers who lack earthquake engineering analysis knowledge of pipes and adapt ASCE and ASME guidelines. Earthquake resistant designs in Korea review braces only. Hence, various analyses under load conditions, such as the internal pressure of a pipe, force exerted by a continuous load, and an earthquake, are required to ensure reliability. An engineering earthquake-resistance analysis showed that tree type pipe networks are less stable than grid and loop type pipe networks. A comparison of earthquake-resistance analysis based on stress and strain revealed that strain analysis exhibited a conservative result value in the range of over-stress. Therefore, for the earthquake-resistance analysis of pipes, it is rational that engineers perform analysis to achieve the required standards through engineering analysis rather than uniform calculations, which should also be analyzed considering various analysis conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.534-539
• /
• 2005

Nodal displacements are referred to the initial configuration in the total Lagrangian formulation and to the last converged configuration in the updated Lagrangian furmulation. This research proposes a relative nodal displacement method to represent the position and orientation for a node in truss structures. Since the proposed method measures the relative nodal displacements relative to its adjacent nodal reference frame, they are still small for a truss structure undergoing large deformations for the small size elements. As a consequence, element formulations developed under the small deformation assumption are still valid for structures undergoing large deformations, which significantly simplifies the equations of equilibrium. A structural system is represented by a graph to systematically develop the governing equations of equilibrium for general systems. A node and an element are represented by a node and an edge in graph representation, respectively. Closed loops are opened to form a spanning tree by cutting edges. Two computational sequences are defined in the graph representation. One is the forward path sequence that is used to recover the Cartesian nodal displacements from relative nodal displacement sand traverses a graph from the base node towards the terminal nodes. The other is the backward path sequence that is used to recover the nodal forces in the relative coordinate system from the known nodal forces in the absolute coordinate system and traverses from the terminal nodes towards the base node. One open loop and one closed loop structure undergoing large deformations are analyzed to demonstrate the efficiency and validity of the proposed method.

• Journal of the Korean housing association
• /
• v.19 no.6
• /
• pp.33-44
• /
• 2008

The street system in multi-family housing is an important design element to control the circulation of vehicles and pedestrians, and to form the spatial organization of the projects. In particular, in the case of high-rise apartments, the street patterns have an influence on the safety, amenity, and convenience of facilities. Until now, however, the design of street patterns in most high-rise multi-family housing projects has diminished the quality of residential environments because priority of design consideration has primarily been given to planning road ways and parking areas. Nevertheless, the design competitions introduced for the first time in the 1980s have played a significant role in developing fresh ideas and concepts in housing design. Because street patterns have been respectably modified as a result of the generalizing of design competitions, it is important to review the ideas that have been proposed in competitions over the recent past. In this context, this study classified the types of street patterns and analyzed their design characteristics for the proposals of housing design competitions since the 1990s. As a result of this analysis, the road patterns are classified into 4 types: 1) serial type, 2) isolated type, 3) mixed type, and 4) not a road pattern due to the system of connection. In addition, these were further divided into 8 types: 1) loop, 2) ring, 3) penetration, 4) tree, 5) direct entry, 6) ring and penetration, 7) loop and penetration, 8) not a road pattern due to appearance and the collector.

• Journal of Digital Contents Society
• /
• v.18 no.4
• /
• pp.739-745
• /
• 2017

This paper presents and discusses an implementation of the GPU shifted sorting method to find approximate k nearest neighbors which executes within "warp", the minimum execution unit in GPU parallel architecture. Also, this paper presents the comparison results with other two common nearest neighbor searching methods, GPU-based kd-tree and ANN (Approximate Nearest Neighbor) library. The proposed implementation focuses on the cases when k is small, i.e. 2, 4, 8, and 16, which are handled efficiently within warp to consider it is very common for applications to handle small k's. Also, this paper discusses optimization ways to implementation by improving memory management in a loop for the CUB open library and adopting CUDA commands which are supported by GPU hardware. The proposed implementation shows more than 16-fold speed-up against GPU-based other methods in the tests, implying that the improvement would become higher for more larger input data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.497-504
• /
• 2021

This paper presents improvement of the reception noise suppression method during formation flights of aircraft. Since aircraft communication equipment is very important for flight mission and safety to perform the functions of internal/external communications, it is required to implement noise-free, clean communication quality, and transmitting/receiving functions. Therefore, the FTA (Fault Tree Analysis) analysis and failure search were performed on the reception noise, and the internal noise of the intercom that affected the reception noise and the none-transmition phenomenon was identified. We changed the multiple grounds of the intercom to a single ground and applied an improved method of filtering the DC Offset voltage. As a result, the voice quality of the communication system of the aircraft was improved through the reduction of the reception noise during formation flights, and it was verified by ground and flight tests.

• Korean Journal of Microbiology
• /
• v.32 no.3
• /
• pp.177-181
• /
• 1994

The sequences of the cytoplasmic 5S rRNAs(EMBL accession number X73589 and X73890) from two polupores, Ganoderma applanatum and Schizopora paradoxa, were determined by the direct chemical method for sequencing RNA and compared to the sequences of 9 reported mushrooms. 5S rRNAs of Ganoderma applanatum and Schizopora paradoxa consisted of 118 bases and fit the secondary structure model of the 5S rRNAs of basidiomycetes proposed by Huysmans et al. Based on Kimura’s K_nuc values, the closest fungus to Ganoderma applanatum was Ceratobasidium cornigerum and the one to Schizopora paradoxa was Bjerkandera adusta. When the secondary structures of 5S rRNAs of 11 mushrooms were compared the base substitution occurred at helix regions more than at loop regions. When a phylogenetic tree was constructed using the Neighbor program of the PHYLIP package, it partially discriminated and separated the mushrooms of the Hymenomycetes by the order.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.67-70
• /
• 2000

최근 들어, 인터넷의 폭넓은 보급과 급속한 대중화에 따라 네트워크를 통하여 음성을 전송하거나 저장하려는 시도가 많이 이루어지고 있다. 본 논문에서는 네트워크를 통한 멀티미디어 전송에서 음성부호화 표준으로 널리 상용되는 ITU-T G.723.1 dual-rate speech coder의 효율적인 다채널 구현을 위한 고속 알고리듬을 제안한다. 고속 알고리듬은 부호화 과정에서 많은 계산량을 차지하는 적응 코드북 검색과 고정 코드북 검색 과정에 적용된다. 적응 코드북 검색 과정에서는 지연과 이득을 동시에 찾는 기존의 방법 대신, 지연과 이득을 순차적으로 검색함으로써 계산량을 개선하였다. 전송률에 따라 다른 알고리듬을 사용하는 고정 코드북 검색 과정에서는 다음과 같은 고속 알고리듬을 제안한다. MP-MLQ(Multi-Pulse Maximum Likely Quantization) 방법을 사용하는 높은 전송률(6.3 kbit/s)인 경우, 펄스를 등 간격으로 검색함으로써 계산량을 줄였다. ACELP(Algebraic CELP) 방법을 사용하는 낮은 전송률(5.3 kbit/s)인 경우는 기존의 nested-loop 검색방법 대신, 펄스를 쌍으로 나누어 순차적으로 찾는 depth-first tree 검색 방법을 적용하여 계산량을 감소시켰다. 제안된 고속 알고리듬에 대해 주관적 음질 평가 방법을 수행한 결과, 제안된 방법이 기존의 방법에 비해 음질의 저하가 없음을 확인하였다. 고정 소수점 DSP인 TMS320C6201을 사용하여 고속 알고리듬을 구현한 결과, 높은 전송률의 경우에는 10.29 MIPS, 낮은 전송률의 경우에는 8.70 MIPS의 연산량으로 구현 가능함을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.477-481
• /
• 2007

Korean Ogol chicken has been registered as a natural monument in Korea and regarded as a valuable genetic resource for the world. As an initial step to investigate the genetic structures of this breed, phylogenetic analysis and calculation of genetic diversities have been performed using mitochondrial DNA (mtDNA) sequence variations. A total of 31 Korean Ogol chicken was grouped into four haplotypes and the large haplotype was represented in 12 individuals. The unrooted neighbor-joining tree indicates that the Korean Ogol chicken shared three (A to C) major chicken lineages representing the high genetic variability of this breed. These results can be used for making the breeding and conservation strategies for the Korean Ogol chicken.

• Korean journal of applied entomology
• /
• v.56 no.4
• /
• pp.377-385
• /
• 2017

Estimates of evolutionary sequence divergence and inference of a phylogenetic tree for eight delphacid planthopper species were based on the full-length nucleotide sequence of the internal transcribed spacer 2 (ITS2) region. Size of the ITS2 DNA sequence varied from 550 bp in Sogatella furcifera to 699 bp in Nilaparvata muiri. Nucleotide sequence distance ($d{\pm}S.E.$) was lowest between N. muiri and N. bakeri ($0.001{\pm}0.001$), and highest between Ecdelphax cervina and Stenocranus matsumurai ($0.579{\pm}0.021$). Sequence distance between N. lugens and other planthoppers ranged from $0.056{\pm}0.008$ (N. muiri) to $0.548{\pm}0.021$ (S. matsumurai). In the neighbor-joining phylogenetic tree, all planthoppers were clustered separately into a species group, except N. muiri and N. bakeri. The ITS2 nucleotide sequence of N. lugens was used to design four loop-mediated isothermal amplification (LAMP) primer sets (BPH-38, BPH-38-1, BPH-207, and BPH-92) for N. lugens species-specific detection. After the LAMP reaction of three rice planthoppers, N. lugens, S. furcifera, and Laodelphax striatellus, with the four LAMP primer sets for 60 min at $65^{\circ}C$, LAMP products were observed in the genomic DNA of N. lugens only. In the BPH-92 LAMP primer set, the fluorescence relative to that of the negative control differed according to the amount of DNA (0.1 ng, 10 ng, and 100 ng) and incubation duration (20 min, 30 min, 40 min, and 60 min). At $65^{\circ}C$ incubation, the difference was clearly observed after 40 min with 10 ng and100 ng, but with a 60-min incubation period, the minimum DNA needed was 0.1 ng. However, there was little difference in fluorescence among all DNA amounts tested with 20 or 30 min incubations.

• Journal of Plant Biotechnology
• /
• v.44 no.4
• /
• pp.409-415
• /
• 2017

The vegetation period of trees might be prolonged by the delay of the leaf senescence in autumn. Thus, we focused on the generation of senescence-delayed transgenic trees to enhance biomass production. The PagMYC2, a gene containing the basic helix-loop-helix domain, was selected as a candidate for a senescence-delayed transgenic tree. The PagMYC2 gene was specifically induced after treatment with phytohormone jasmonic acid, and upregulated by abiotic stresses such as salinity, osmotic pressure and a low temperature. The constitutive overexpression of the PagMYC2 delayed the leaf senescence and inhibited chlorophyll degradation in the transgenic poplars. Leaf senescence analysis was performed in the leaf tissues of the PagMYC2-over-expression transgenic poplars. The transgenic poplars exhibited higher photochemical efficiency than did a wild type plant under a short-day condition (6 hours light/18 hours darkness) or a low temperature condition ($15^{\circ}C$) that was similar to the weather conditions of autumn. These results suggest that the PagMYC2 is a useful genetic resource to improve biomass production, which is able to sustain growth with senescence-delayed leaves for a long time in autumn.