• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.04a
• /
• pp.75-78
• /
• 1987

The basic fuctions design necessity and basic structure of a computerized systed which keeps records on the insided and outside plant facilities mechanizes the assigment of loop and exchange facilities maintains short jumpers on main distribution frame digtributes and controls the service order and upgates the exchange datasutomatically are considered in this paper.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.16_17
• /
• 2009

지능형 배전망을 추구하기 위해 본 논문에서는 배전계통의 루프 구성과 방사상의 보호협조 방법을 수정한 새로운 루프구성에 대한 보호협조를 제안하였다. 그리고 배전 자동화가 되어 있다는 전제 하에서 제안된 보호협조 방법을 토대로 방사상 계통과 방사상 보호협조를 그대로 적용한 루프 배전계통, 마지막으로 제안된 보호협조 방법을 적용된 루프 계통에 대한 신뢰도 이득을 분석하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.71-74
• /
• 1993

The purpose of this paper is that the compressor design engineers reduce a development term with CAE approach. By using CAE, geometries for various type of piping systems can be constructed interactively and the Vibration Characteristics and Stress distribution are analyzed by FEM. Sensitivity and structural modification analysis capability are also used to reduce the total number of prototypes. An example is shown to validate the effectiveness of this system.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.282-287
• /
• 2021

A multicore system must be able to take full advantage of the program's instruction and data parallelism. This study introduces the data replication technique as a support technique to maximize the program's instruction and data parallelism. Instruction level parallelism can be limited by data dependency. In this case, if data is replicated to each processor core and used, instruction level parallelism can be used to the maximum. The technique proposed in this study can maximize the performance improvement effect when applied to scientific applications such as matrix multiplication operation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.72-79
• /
• 2009

Solar energy is desirable due to its renewable and pollution-free properties. In order to utilize the present utility grid infrastructure for power transmission and distribution, a do-dc boost converter and grid connected dc-to-ac inverters are needed for solar power generation. The dc-dc boost converter allows the PV system to operate at high do-link voltage. The single-phase inverter provides the necessary voltage and frequency for interconnection to the grid. In this paper, first, current loop transfer function of a single-phase grid-tie inverter has been systematically derived Second the MPPT of conductance increment method at converter side is proposed to supply the maximum power to the inverter side. Simulation results are shown to access the performance of PV system and its behaviour at the interconnection point.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.9-16
• /
• 2015

The control law for simultaneous pressure and thrust control of solid DACS(Divert Attitude Control System) is suggested. To regulate the two variables effectively, the control structure of sequential loop closer is applied to the system considering the physical characteristics of each variable and the weighted pseudo-inverse method is suggested to allocate effective command for indeterminate system. Also, the pressure guidance law for safe and high acceleration is applied to the homing stage to verify the effectiveness of the command distribution.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.222-228
• /
• 2006

In this paper, the performance of a multiuser diversity system combined with a multi-element transmit antenna system is analyzed under the assumption of independent Rayleigh fading. A measure of system .level performance is an average channel capacity as a function of the number of users and antennas. Average channel capacity is obtained from the instantaneous signal-to-noise ratio(SNR) distribution combined by both transmit diversity(TD) at each link and multiuser diversity at system level. Numerical results show that closed-loop antenna techniques provide an additional gain with multiuser diversity system due to array gain, even though space diversity gain reduces multiuser diversity gain. On the other hand, the space-time block coding(STBC) that provides full order space diversity gain only has a destructive influence on multiuser diversity.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1514-1524
• /
• 2019

Hydrogen-steam gas mixture may be injected into containment with flow regime varying both spatially and transiently due to wall effect and pressure difference between primary loop and containment in severe accidents induced by loss of coolant accident. Preliminary CFD analysis is conducted to gain information about the helium flow regime transition process from jet to buoyancy plume for forthcoming experimental study. Physical models of impinging jet and wall condensation are validated using separated effect experimental data, firstly. Then helium transportation is analyzed with the effect of jet momentum, buoyancy and wall cooling discussed. Result shows that helium distribution is totally dominated by impinging jet in the beginning, high concentration appears near gas source and wall where jet momentum is strong. With the jet weakening, stable light gas layer without recirculating eddy is established by buoyancy. Transient reversed helium distribution appears due to natural convection resulted from wall cooling, which delays the stratification. It is necessary to concern about hydrogen accumulation in lower space under the containment external cooling strategy. From the perspective of experiment design, measurement point should be set at the height of connecting pipe and near the wall for stratification stability criterion and impinging jet modelling validation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.7
• /
• pp.16-21
• /
• 2008

For Preisach model, Everett function from the transient curves is needed to simulate the hysteresis phenomena. However it becomes very difficult to get the function if the it would be made only from experiments. In this paper, a simple and stable procedure using least square method and logarithm function to determine the Everett function which follows the Gauss distribution for interaction field axis is proposed. The characteristics of the parameters used in this procedure are also presented. The proposed method is applied to implement hysteresis loops. The simulation for hysteresis loop is compared with experiments and good agreements could be shown.

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.665-675
• /
• 2002

It is very closely related with the reliability of the pipe network to predict pipe burst and diminish burst effect in water distribution system. Most of the engineers have not consider pipe layout and the effect of pipe burst in conservative pipe network design. In this study, The effect of pipe burst in the network is analyzed with respect to pipe network geometric topology and the method of increasing the system reliability is presented by reducing pipe-burst effect. In existing pipe system, it is only designed to the closed loop system but in case of each pipe burst, it cannot transmit appropriate water to consumers and occurs severe hydraulic head drop in many nodes. The techniques developed in this study allow proper pipe diameter and pipe layout to pipe system through the analysis of pipe-burst effect. Thus, when each pipe is bursted, pipe system is prevented from severe pressure head drop in demand nodes and can supply stable flowrate to consumer.