• Journal of the Korean Society of Costume
• /
• v.59 no.6
• /
• pp.140-155
• /
• 2009

This study tries to find out the special twine technique of flat string and refers to historical documents, records, artifacts of excavated articles, and real materials. In Japan weaved cloth is called Jomul or Jonue and these methods were brought to Japan from Korea during Aska Period(645${\sim}$710) and Nara Period(710${\sim}$794). Among those knot methods, the 1/1 knot was written as a Shillajo on a documentary record at Heian Period, Engisik, and Samdaesillok which is a historic document from King Saiya to King Gowooko(858${\sim}$887). Also 2/2 knot weaving was recorded as Goryeojo that the technique originated for a long time in Japan. During the Joseon Dynasty, Gunmok was written as Dahoi, and Gwangdahoe, which means wide and flat Gunmok, was the name of Dae(Belt). The frame for the twine Gwangdahoe is no longer in Korea, but only can be found in Japan as a Goraiwoochi loom for Shillajo and Goryeojo from Korea. There are currently artifacts by the techniques of Shillajo and Goryeojo that were excavated in 15${\sim}$17C in Korea. Therefore this study was looked into the artifacts from 6${\sim}$8C in $Sh{\"{O}}so$-in, and the features of Dae (Belt) weaved by Shillajo and Goryeojo case method. Gwangdahoe excavated artifacts in the mid Jeosun Dynasty was restored by the process of Goryeojo weaving method.

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.447-456
• /
• 2008

Open-pit mine slope design must be carried out from the economical efficiency and stability point of view. The overall slope angle is the primary design variable because of limited support or reinforce options available. In this study, the slope angle and critical slope height of large coal mine located in Pasir, Kalimantan, Indonesia were determined from safety point of view. Failure time prediction based on the monitored displacement using inverse velocity was also conducted to make up fir the uncertainty of the slope design. From the study, critical slope height was calculated as $353{\sim}438m$ under safety factor guideline (SF>1.5) and $30^{\circ}$ overall slope angle but loom is recommended as a critical slope height considering the results of sensitivity analysis of strength parameters. The results of inverse velocity analysis also showed good agreement with field slope cases. Therefore, failure of unstable slope can be roughly detected before real slope failure.

• The Korean Journal of Zoology
• /
• v.31 no.4
• /
• pp.295-299
• /
• 1988

An endogenous 17-6a inhibitor of Caa+_activated protease has been purified from neo-plastic tissues of human stomach using heat treahent and conventional chromatographir procedures. It appears to consist of a single polvpeptide since the same molecular weight was obtained by both gel fntration under nondenaturing condition and gel electrophoresis in the presence of SDS. Since the size of the inhibitor or is the smallest amens those reported so far, it may represent a functional unit for inhibiting Caa+_activated protease. This protein is also capable of inhibiting the protease isolated loom chick skeletal muscle. Thus, the functional unit of the inhibitor most well be conserved during evolution. Howrver, it remains unclear what may be the physiological significance of the presence of the Iow-molecular weight form of the inhibitor in neoplastic tissues of human stomach. 사람의 위암조직으로부터 Ca2)_activated protease을 저해하는 단백질을 열처리 및 여러 크로마토그라피 방법을 이용하여 순수분리 하였다. 이 저해단백질은SDS-전기영동카자1 filtra-tion의 방법에 의하여 그 분자량이 17 kDa으로 나타남으로 보아 단일 Polypeptide로 구성되어 있음을 알 수 있었다. 이 저해 단백질의 분자량은 지금까지 알려진 CaB+_activated protease의 저해단백질에 비하여 가장 작은 것이었다. 따라서, 이 단.백질은 Ca2)에 의하여 활성화되는 단백질 분해효소의 작용을 저해하는 기능적 단위로 추측되었다. 한편, 이 저해제는 계 골격근에서 추출한 Ca2+ _activated protease의 촹성 도 억제 하는 것으로 나타났다. 이러 한 결과는 이 저 해 단백질의 기능적 단위가 진화과정 동안 오래 보존되어 왔음을 시사한다. 그러나, 사람의 위암조직에서 이 저해제가 무슨 이유로 가장 작은 분자량의 단백질로 존재하는지에 대한 생리학적 중요성에 관한 문제는 앞으로 많이 연구되어져 야 할 것이다.

• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.107-107
• /
• 1995

This study was conducted to evaluate the effects of pressure and dissolved oxygen concentration on the activated slut비e and to determine the optimum depth of deep shaft process. Some results from this study were summarized as follows. 1. It is considered that low sludge product in the activated sludge system maintaining high dissolved oxygen concentration is attributed to the increase of endogeneous respiration rate caused by the increase of aerobic zone in the sludge floe. 2. The increase of dissolved oxygen concentration does not affect to the increase of organic removal efficiency greatly and therefore the limiting factor is the substrate transfer into the inner part of floe. 3. The yield coefficient, Y is decreased in proportion to the increase of oxygen concentration. In this study, Y values arre ranged from 0.70 to 0.41 according to the variation of dissolved oxygen concentration from 18.0mg/$\ell$ to 258 mg/$\ell$. 4. The optimum depth of deep shaft process should be determined within the limits of non-toxicity to the microorganism and it is about loom in this study.

• Fashion & Textile Research Journal
• /
• v.16 no.1
• /
• pp.43-54
• /
• 2014

In textile industry, needs for various weave drafts have been increased to produce high qualified textile goods. One of disadvantages of traditional textile industry was spending time and money on manual sampling. Nowadays, however, weave draft design and sampling using CAD programs reduce these consumption efficiently. Therefore, this study aimed to provide high qualified woven fabrics by weave draft designs influenced by geometric patterns. First, We analyzed geometric patterns, except for dot, stripe, and checks, in fashion collections from 2009 to 2014 S/S. Then, based on these analyses, design concepts were decided. Third, weave drafts influenced by geometric patterns were designed with weave CAD program, TEX PRO 10.0 by Youngwoo CNI inc. Forth, We simulated fabrics woven by new drafts using CAD programs, depending on fibers, yarns, density of woven, colors, and finishes. Unclassified geometric patterns would be expressed by small size patterns that influenced by retro moods, square patterns with various color variation, zigzag lines, and pieces of puzzles. Three design concepts were decided as greenness, neoclassic, and romantic chic. Thus, geometric patterns for printing were created as drafts for general looms, and one repeat of each draft were provided. According to the design concepts, we designed 13 fabrics with 4 geometric patterns weaving drafts. All Drafts were designed with CAD programs. Finally, same drafts were simulated as woven fabrics for both S/S and F/W seasons by changing each element, such as fiber, yarns, density, colors, and finishes.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.39-47
• /
• 2004

In mold machining, there are many concave machining regions where chatter and tool deflection occur since MRR(material removal rate) increases as curvature increases even though cutting speed and depth of cut are constant. Boolean operation between stock and tool model is widely used to compute MRR in NC milling simulation. In finish cutting, the side step is reduced to about 0.3mm and tool path length is sometimes over loom, so Boolean operation takes long computation time and includes much error if the resolution of stock and tool model is larger than the side step. In this paper, curvature of CL (cutter location) surface and side step of tool path is used to compute the feedrate for constant MRR machining. The data structure of CL surface is Z-map generated from NC tool path. The algorithm to get local curvature from discrete data was developed and applied to compute local curvature of CL surface. The side step of tool path was computed by point density map which includes cutter location point density at each grid element. The feedrate computed from curvature and side step is inserted to new tool path to regulate MRR. The resultants were applied to feedrate optimization system which generates new tool path with feedrate from NC codes for finish cutting. The system was applied to the machining of speaker and cellular phone mold. The finishing time was reduced to 12.6%, tool wear was reduced from 2mm to 1.1mm and chatter marks and over cut on corner were reduced, compared to the machining by constant feedrate. The machining time was shorter to 17% and surface quality and tool was also better than the conventional federate regulation using curvature of the tool path.

• The Journal of Korean Society for Radiation Therapy
• /
• v.11 no.1
• /
• pp.6-10
• /
• 1999

The field size can be beam output, therefore MonitorUnit can be varied due to field size dependence The purpose of this study is to evaluate and compare the dose variation according to exchange of collimator The measurements were perfomed with Wellhofer dosimetry system(water phantom. ion chamber. electrometer. system controller. build up cap. etc)and two types of linear accerlerator (Mevatron KD, MevatronMX) Scatter can be affected to field size dependence and scatter correction is separated into collimator and phantom components, scatter components can affect by exchanging of collimator Measurements of collimator scatter factor(Sc) was done in air with build up cap. 1)Square field (5cm2 to 40cm2) was measured 2)and then keeping the upper jaw constant at loom and varing lower jaw from 5cm to 40cm, 3)keeping the lower jaw constant at 10cm and varing upper jaw from 5cm to 40cm Measurements of total scatter factor(Scp) was done in water at Dmax as the procedure of collimator scatter factor measurements in water Dmax The total scatter factors were obtained to the following equation(Sp=Scp/Sc) The measured data is normalized to the data of reference field size($10{\times}10$), rectangular field is inverted to equivalent field to compare three field size data As the collimator setting is varied, the output was changed In conclusion, the error was obtained small but it must be eliminated if we intend to reach the common stated goal of $5\%$ overall uncertainty in dose determination

• Current Research on Agriculture and Life Sciences
• /
• v.23
• /
• pp.53-60
• /
• 2005

This study was carried out in order to produce useful material for the forest multiple use and forest protection management by soil physio-chemical analysis of studied area in Mt. Namsan. The result of soil physio-chemical analysis and statical analysis represented as following. In side of physical properties of forest soil in Mt. Namsan, Soil depth was average 31.4cm and available soil depth was average 20.0cm. Soil type was Brown forest soil that representative soil type in Korea. Soil texture was sandy loom(SL) except valley area. In side of chemical properties, the range of soil acidity was 4.29 ~ 5.19 (average 4.76), organic matter content was 3.17% that compared the lowest value to organic matter content of Korea forest soil. Available phosphorus was 3.64ppm that was lower than others forest soil. Exchangeable cation content was similar to the Korea brown forest soil. Cation exchange capacity(CEC) was $8.22cmol_c/kg$ in Mt. Narnsan.

• Journal of the Korean Professional Engineers Association
• /
• v.24 no.6
• /
• pp.97-105
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ø70mm on the calcalious sand stone (soft-moderate-semi hard Rock). The total numbers of fire blast were 88 round. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagation Law in Blasting Vibration (Equation omitted) where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum Charge per delay-period of eighit milliseconds o. more(kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D / W$^n$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over 100m distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30 ‥‥‥under 100m ‥‥‥V=41(D/$^3$√W)$\^$-1.41/ ‥‥‥A Over 100 ‥‥‥‥under 100m ‥‥‥V=121(D/$^3$√W)$\^$-1.56/ ‥‥‥B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2016

Objective: This study aimed to find good design for summer functional farm shoes under the agricultural environment and working characteristics, which can help safe farm work and further promote the efficiency of working. Background: Most accidents at farms were overturn accidents caused by slipping or falling, and it was found that the main factors which caused the overturn accidents were inappropriate work shoes for the working conditions. These inappropriate work shoes often cause overturn accidents in the rural areas with steep paths. Method: A survey on work shoes was conducted with 174 farmers, and the outcome of this survey was used to find problems of work shoes and improvement ideas for the design of work shoes which can be used at farms. Results: Regarding the form of farm shoes, the ankle height was set at 6 inches to prevent the bending of the ankle and the inflow of foreign substances. The size and groove of the pattern of the outsole were extended to prevent catching of foreign substances. In the upper part, polyurethane and cordura were used in combination to secure air permeability, which was pointed out as the reason for the discomfort during the work wearing existing work shoes. Conclusion: Since farmers felt discomfort with the shoes which they were currently wearing, this study suggested a design of farm shoes by analyzing the important matters of the work shoes in development in order to improve such discomfort. Application: This study can help develop farm shoes that would practically ease farmers' burden of working at farm worksites and keep them safe.