• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.544-550
• /
• 1997

In this study, the advanced on-sided stress wave velocity measurement method was applied to investigate the effects of composition, age and moisture content in concrete. Two concrete specimens that have different composition were used to figure out the change of the Longitudinal and Surface wave velocity due to different composition. The other concrete specimen was cast and the Longitudinal and Surface wave velocity was monitored during curing process. After 28-day old, the effect of moisture content in the concrete specimen to the stress wave velocity is presented in this paper during the time period 43-74 days after casting. For drying process. an aggregate drying oven was used. A conventional ultrasonic through transmission method was used to compare with the results determined by the one-sided method.

• Steel and Composite Structures
• /
• 제44권5호
• /
• pp.619-632
• /
• 2022

There are numerous structural details (Longitudinal beam, web plate, U-ribs and I-ribs) in the top and bottom plates of steel box girders, which have significant influences on the longitudinal stress (normal stress) distribution. Clarifying the influence of these structural details on the normal stress distribution is important. In this paper, the ultra-wide steel box girder with large cantilevers of the Jinhai Bridge in China, which is the widest cable-stayed bridge in the world, has been analyzed. A 1:4.5 scale laboratory model of the steel box girder has been manufactured, and the influence of structural details on the normal stress distribution in the top and bottom plates for four different load cases has been analyzed in detail. Furthermore, a three-dimensional finite element model has been established to further investigate the influence regularity of structural details on the normal stress. The experimental and finite element analysis (FEA) results have shown that different structural details of the top and bottom plates have varying effects on the normal stress distribution. Notably, the U-ribs and I-ribs of the top and bottom plates introduce periodicity to the normal stress distribution. The period of the influence of U-ribs on the normal stress distribution is the sum of the single U-rib width and the U-rib spacing, and that of the influence of I-ribs on the normal stress distribution is equal to the spacing of the I-ribs. Furthermore, the same structural details but located at different positions, will have a different effect on the normal stress distribution.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.833-838
• /
• 2001

The objectives of this study are to investigate effective stiffness of circular reinforced bridge columns and to provide reasonable effective stiffness equations for seismic design to the current Korean Bridge Design Standard. The material nonlinear analysis was conducted for 5184 columns of which variables were the concrete compressive stress, the steel yielding stress, the longitudinal steel location parameter, the longitudinal steel ratio, the axial load level, and the diameter of section. The current Korean Bridge Design Standard generally used the gross section stiffness because of unclear provision, it may be non-conservative because of being evaluated greater design seismic force and less design displacement than those of the abroad provision. Therefore, the proposed effective stiffness equations include three variables such as : the longitudinal steel location parameter, the longitudinal steel ratio, and the axial load ratio. Two equations of effective stiffness are proposed which may be used for earthquake force estimation and for earthquake displacement estimation, respectively.

• 한국터널지하공간학회 논문집
• /
• 제19권6호
• /
• pp.887-903
• /
• 2017

터널이 시공되는 환경은 다양하여 지형이 평탄하지 않거나 지표가 경사가 진 경우가 많으며, 이런 경우에는 지반내 응력의 분포가 일정하지 않다. 그러므로 이와 같은 환경에서는 얕은 터널 굴착에 따라 종방향 하중전이 특성이 달라서 그 영향이 불명확하다. 또한, 시공방법이나 지반조건 및 굴진면의 변위형태 등이 종방향 하중전이 발생경향에 영향 줄 것이므로, 이를 종합적으로 고려한 연구가 필요하다. 따라서 본 연구에서는 지반의 경사를 $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$로 모사하고, 굴진면의 변위형태(상부 큰 변위, 등변위, 하부 큰 변위)에 따른 굴진면의 토압과 터널 천단상부의 종방향 하중전이 특성을 실험적으로 규명하였다. 연구결과 굴진면에서 변위가 발생하면 굴진면 토압이 감소하고 터널의 천단 하중이 증가하며, 굴진면의 토압변화량에 따라 터널 천단상부의 하중전이의 크기와 발생경향이 변화되었다. 따라서 굴진면의 토압변화가 터널 종방향 하중전이에 직접적인 영향을 주는 것을 알 수 있었다. 지표경사가 작으면 하중전이 영역이 넓어지며 지표경사가 커질수록 종방향으로 전이되는 경향이 감소하고 굴진면 부근에서 집중되었다. 또한, 굴진면의 변위형태에 따라 종방향으로 전이되는 하중의 분포경향도 달라지므로 종방향 지반의 응력조건과 굴진면의 변위형태는 터널 종방향 하중전이의 형태와 크기에 영향을 주는 것으로 분석되었다.

• 한국강구조학회 논문집
• /
• 제14권6호
• /
• pp.683-690
• /
• 2002

본 연구에서는 국내에 적용된 강바닥판의 데크플레이트와 종리브 현장 연결 스캘럽부의 구조상세를 검토하고 실험체를 제작하여 정적재하실험 및 피로실험을 실시하였다. 또한 FEM 해석을 통하여 스캘럽 길이, 스캘럽 곡률반경, 데크플레이트 두께 등과 같은 매개변수가 종리브 스캘럽부의 응력에 미치는 영향을 살펴보았으며, 이를 통하여 스캘럽부에 대한 S-N선도를 추정하였다. 피로실험을 수행한 결과, 낮은 응력수준에서는 스캘럽부에서 피로균열이 발생하였고, 높은 응력수준에서는 핸드홀 덮개판의 파괴 후에 종리브의 갑작스런 파괴가 일어났다. 피로실험결과를 JSSC 피로등급과 Shigley와 Juvinall이 제안한 방법에 의한 피로강도와 비교검토한 결과, 데크플레이트와 종리브 현장연결 스캘럽부는 규정된 피로등급를 만족하였다.

• Steel and Composite Structures
• /
• 제16권5호
• /
• pp.455-480
• /
• 2014

Sixteen concrete filled square CFRP-steel tubular (S-CFRP-CFST) stub columns under axial compression were experimentally investigated. The experimental results showed that the failure mode of the specimens is strength loss of the materials, and the confined concrete has good plasticity due to confinement of the CFRP-steel composite tube. The steel tube and CFRP can work concurrently. The load versus longitudinal strain curves of the specimens can be divided into 3 stages, i.e., elastic stage, elasto-plastic stage and softening stage. Analysis based on finite element method showed that the longitudinal stress of the steel tube keeps almost constant along axial direction, and the transverse stress at the corner of the concrete is the maximum. The confinement effect of the outer tube to the concrete is mainly focused on the corner. The confinements along the side of the cross-section and the height of the specimen are both non-uniform. The adhesive strength has little effect both on the load versus longitudinal strain curves and on the confinement force versus longitudinal strain curves. With the increasing of the initial stress in the steel tube, the load carrying capacity, the stiffness and the peak value of the average confinement force are all reduced. Equation for calculating the load carrying capacity of the composite stub columns is presented, and the estimated results agree well with the experimental results.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.69-79
• /
• 1996

Dynamic stress intensity factors are derives when the crack is propagating with constant velocity under longitudinal shear stress in orthotropic disk plate. General stress fields of crack tip propagating with constant velocity and least square method are used to obtain the dynamic stress intensity factor. The dynamic stress intensity factors of GLV/GTV=1(=isotropic material or transversely isotropic material) which is obtained in out study nearly coincides with Chiang's results when mode Ⅲ stress is applied to boundary of isotropic disk. The D.S.I.F. of mode Ⅲ stress is greater when α(=angle of crack propagation direction with fiber direction) is 90° than that when α is 0°. In case of a/D(a:crack length, D:disk diameter)<0. 58, the faster crack propagation velocity, the less D.S.I.F. but when crack propagation velocity arrive on ghear stress wave velocity, the D.S.I.F. but when crack propagation velocity arrive on shear stress wave velocity, the D.S.I.F. unexpectedly increases and decreases to zero.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.96-104
• /
• 2000

This paper represents to develop a computer software system which is capable to analyze the phase transformation of high strength steel(BV-AH32) and to predict heat transfer and welding residual stress due to phase transformation during Gas Metal Arc(GMA) welding. The developed model was considered temperature dependent properties such as young's modules, coefficient of thermal expansion and yield stress as well as the double ellipsoidal heat distribution by the moving arc. From the results, it was found that the longitudinal and transverse residual stresses calculated by the coupled analysis of heat transfer, residual stress and phase transformation showed good agreement with the experimental data. In addition, the temperature distribution as well as longitudinal and transverse residual stresses of weldment by the 1-pass and 2-pass of welding were also determined.

• 한국보육지원학회지
• /
• 제12권3호
• /
• pp.1-19
• /
• 2016

The purpose of this study was to examine the effect of parenting efficacy measured at 6 months of infancy, and on parenting stress at 9-months of infancy through a short-term longitudinal approach. Participants were 116 couples living in Seoul and Gyeonggi-do, whose first born children were in infancy. The results of the 116 couples were analyzed through the APIM analysis method. The results of the APIM showed that mothers' and fathers' actor effect was significant, which meant that parenting efficacy at 6 months of infancy could predict the existence of parenting stress at 9 months of infancy. However, the partner effect of both mothers and fathers was insignificant. This research demonstrates the significance of parenting efficacy at early infancy, which in turn affects parenting stress as well as factors that need to be considered in pre-parental education.

• 한국항해항만학회지
• /
• 제32권2호
• /
• pp.121-126
• /
• 2008

This paper presents hull stress monitoring system installed in LNGC damaged by a Typhoon Elongation/contraction of removed areas has been assessed in terms of possible residual stress that will take place in replaced blocks when the applied load is removed. The bending moment of a vessel changes actually in terms of loss of longitudinal members and the change of weight distribution in repair procedure. The change of bending moment affects mainly in hull stress of longitudinal members. Hull stress monitoring system was installed on upper deck to prove LNGC stable in the criteria to be less than 40MPa during the period of repair procedure. A temperature measuring system was also installed to exclude the additional stress due to thermal effect from the measured hull stress. As a result, the hull stress was modified with the data measured by the temperature measuring system. This hull stress considering thermal effect was used as a guide stress to check the safety of LNGC during the period of repair procedure.