• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.135-141
• /
• 2007

CSR(Common Structure Rules) enter into force on $1^{st}$ April 2006. Generally for double hull tankers of less than 150m in length, the Rules of the individual Classification Society are to be applied. Where high tensile stresses act through an intermediate plate, increased fillet welds or penetration welds are to be used longitudinal/transverse bulkhead primary support member end connections to the double bottom. If workers have begun to make used of established procedures between corrugated BHD and lower stool joint, first to welding on groove of face and then it has to gouging to blow on groove of root. So amount of man-hour increased, productivity secreased.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2419-2421
• /
• 2008

Some of the scallops like Amesium balloti have an excellent level-swimming ability, i.e. they can swim about 20m by single level swimming with a maximum swimming velocity of about 1.6m/s in the sea. On the other hand, some species like Patinopecten yessoensis have longitudinal grooves on the upper and lower surfaces and others do not. Therefore, in the present study, we measure the lift and drag forces on a real scallop model (Patinopecten yessoensis) in a wind tunnel. Experiments are performed at the Reynolds number of 75,000 based on the maximum chord length, which is within the swimming condition of real scallop (Re = $30,000{\sim}300,000$). To see the effect of longitudinal grooves, we measure the aerodynamic forces on a scallop model by removing the grooves. With the grooves, the lift force increases at low angles of attack (${\alpha}<10^{\circ}$). The drag force increases slightly at all the attack angles considered. The lift-to-drag ratio is increased by about 10% at ${\alpha}<10^{\circ}$.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1813-1819
• /
• 2001

Partial penetration welding Joint defines that groove welds without steel backing, welded from on side, and groove weeds welded from both sides but without back gouging, that is. it has an unwelded portion at the root of the weld. In this study we analysed fur residual stress and displacement distribution on partial penetration welding condition of thick plate metal. For 25.4mm thick plate, theoretical residual stress and displacement analysis by finite element method using ABAQUS was carried out and compared with the experimental result using hole-drilling method. In results of the condition of partial penetration, it appeared that longitudinal stress at welding area was a little difference and transverse stress did not have any effect by partial penetration multi-pass welding. From a point of welding distortion in partial penetration multi-pass welding, it seemed to be better to control root face smaller than 6.35mm.

• Journal of Korean Neurosurgical Society
• /
• 제47권5호
• /
• pp.365-369
• /
• 2010

Objective : There has been inconsistency about definition of the temporal stem despite of several descriptions demonstrating its microanatomy using fiber dissection and/or diffusion tensor tractography. This study was designed to clarify three dimensional configurations of the temporal stem. Methods : The fronto-temporal regions of several formalin-fixed human cerebral hemispheres were dissected under an operating microscope using the fiber dissection technique. The consecutive coronal cuts of the dissected specimens were made to define the relationships of white matter tracts comprising the temporal stem and the subcortical gray matters (thalamus, caudate nucleus, amygdala) with inferior limiting (circular) sulcus of insula. Results : The inferior limiting sulcus of insula, limen insulae, medial sylvian groove, and caudate nucleus/amygdala were more appropriate anatomical structures than the roof/dorso-lateral wall of the temporal horn and lateral geniculate body which were used to describe previously for delineating the temporal stem. The particular space located inside the line connecting the inferior limiting sulcus of insula, limen insulae, medial sylvian groove/amygdala, and tail of caudate nucleus could be documented. This space included the extreme capsule, uncinate fasciculus, inferior occipito-frontal fasciculus, anterior commissure, ansa peduncularis, and inferior thalamic peduncle including optic radiations, whereas the stria terminalis, cingulum, fimbria, and inferior longitudinal fiber of the temporal lobe were not passing through this space. Also, this continued posteriorly along the caudate nucleus and limiting sulcus of the insula. Conclusion : The temporal stem is white matter fibers passing through a particular space of the temporal lobe located inside the line connecting the inferior limiting sulcus of insula, limen insulae, medial sylvian groove/amygdala, and tail of caudate nucleus. The three dimensional configurations of the temporal stem are expected to give the very useful anatomical and surgical insights in the temporal lobe.

• Journal of the Korean Wood Science and Technology
• /
• 제40권6호
• /
• pp.397-405
• /
• 2012

최근 국내에서 목질계 재료를 이용한 데크의 설치사례는 증가하는 추세이나, 상대적으로 데크의 기초 물성과 안전성에 관련된 연구는 미흡한 상황이다. 신발과 데크 사이에서 발생하는 마찰력은 보행자의 기동 능력에 많은 영향을 미친다. 이러한 마찰력은 바닥재의 재료 특성, 바닥재의 요철무늬 형상, 신발 밑창의 형태, 바닥재와 신발 사이 접촉면의 습윤도 등 여러 인자에 의해 영향을 받는다. 본 연구에서는 보행안전성 평가를 위하여 데크의 요철무늬에 따른 마찰력 변화를 측정하고 미끄럼 정도를 평가하였다. 실험에 이용된 데크의 재료는 천연목재와 합성목재의 두 종류이고, 신발과 접촉하는 데크표면은 데크의 길이 방향으로 홈가공처리를 한 단일 논슬립가공 형태와 길이방향에 더불어 가로방향에 추가로 홈 가공처리를 한 이중 논슬립가공 형태 두 종류이다. 실험에 사용된 신발의 밑창 형태는 더블유형(W형)과 네모형(${\Box}$형)의 두 종류를 사용하였고, 데크 표면의 함수율 상태에 따른 마찰력변화를 알아보기 위하여 대기와 평형을 이룬 건조상태와 수분습윤상태에서 측정하였다. 각각의 조건에서 마찰계수를 결정하고 각각의 인자가 마찰력에 미치는 영향을 분석하였다.

• 한국항해항만학회지
• /
• 제38권4호
• /
• pp.335-341
• /
• 2014

최근 고유가와 환율변동 등 어려운 시장상황 속에서 해운선사는 선박의 대형화와 고속화를 요구하고 있다. 선사들은 선박의 운용유지비 절감을 우선적으로 요구하고 있으며, 이에 조선소에서는 기술경쟁력 유지를 위한 방안으로 속도성능 향상에 중점을 두고 지속적으로 노력 하고 있다. 본 논문에서는 에너지 절약형 선형개발에 중점을 두고 유동제어 띠를 사용한 선박의 저항성능 향상에 관하여 소개한다. 본 연구는 혹등고래(Humpback Whale)의 배 주위에 있는 기다란 줄 무늬 형상을 응용하여 선체표면에 "오목하고 길게 팬 줄 형상 또는 볼록하고 기다란 줄 형상"(이하, 유동제어 띠라고 함)을 단일로 적용하였다. 현재, 제안된 형상은 특허출원이 되어 있다. 이 형상은 선체표면의 압력분포 변화와 압력강하 현상 등을 효과적으로 제어하는 역할을 한다. 실선 적용 시 장점은 블록조립이 완성된 후에 선체표면에 부가물을 부착하는 종래기술과 비교하여 볼 때 블록제작 단계에서 단면형상을 반영할 수 있다는 점에서 비용을 절약할 수 있다고 판단된다.

• Animal cells and systems
• /
• 제6권3호
• /
• pp.195-199
• /
• 2002

Four new species of the genus Amynthas are described from Korea： Amynthas mujuensis sp. nov., Amynthas assimilis sp. nov., Amynthas moakensis sp. nov., and Amynthas sangumburi sp. nov. The intestinal caeca are of simple type and genital markings lacking in all four species. Amynthas mujuensis sp. nov. has male field with large oval papillae, each papilla with longitudinal seminal groove； paired spermathecal pores present in 6/7, 7/8 dorsally. Amynthas assimilis sp. nov. has mare field composed of paired symmetrical pear-shaped pads with broad ends laterally, axes of symmetry diagonally oriented towards posterior； spermathecal pores in 5/6, 6/7. Amynthas moakensis sp. nov. has male pores on small porophores surrounded by swollen concentric furrows, with the spermathecal pores in 6/7, 7/8, 8/9, ventrally. Amynthas sangumburi sp. nov. has male pores centered on 0.8 mm circular flat porophores, with the spermathecal pores in 5/6, 6/7, 7/8, 8/9, laterally.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.428-434
• /
• 2001

This study surveys the fiber behavior in yam formation and the Physical properties of Solo-spun yarn. The specimens were made by six types of Solo-spun rollers with fixed twist multiplier In the previous part, the physical properties such as yarn count, evenness, strength, and breaking elongation of these yams were compared with the properties of ring shun yarns and analysed with the mechanism of Solo-spun yarn formation. In the second part of this report, the abrasion resistance and hairiness were discussed wish respect to the micro yarn structures. The narrower the groove width of Solo-spun roller is, the more active the bulk fibers migration is. The Solo-spun film structure has two groups. One is shorter than the others one in longitudinal direction of yarn and has the same structure as ring-spun yarn, which is derided from the smooth zone on the surface of Solo-spun roller. The other one is longer than the former and there are the wrapping fibers. This part is derived from the conflicted grooves on the surface of Solo-spun troller.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.70-70
• /
• 2001

This study surveys the fiber behavior in yarn formation and the Physical properties of Solo-spun yarn. The specimens were made by six types of Solo-spun rollers with fixed twist multiplier In the previous part, the physical properties such as yarn count, evenness, strength, and breaking elongation of these yarns were compared with the properties of ring spun yarns and analysed with the mechanism of Solo-spun yarn formation. In the second part of this report, the abrasion resistance and hairiness were discussed with respect to the micro yarn structures. The narrower the groove width of Solo-spun roller is, the more active the bulk fiber migration is. The Solo-spun yarn structure has two groups. One is shorter than the other one in longitudinal direction of yarn and has the same structure as ring-spun yarn, which is derived from the smooth zone on the surface of Solo-spun roller. The other one is longer than the former and there are the wrapping fibers. This part is derived from the conflicted grooves on the surface of Solo-spun roller.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1033-1039
• /
• 2002

Partial penetration welding joint refers to the groove weld that applies to the one side welding which does not use steel backing and to both side welding without back gouging, that is, the partial penetration welding joint leaves an unwelded portion at the root of the welding area. In this study, we analyzed the residual stress and fracture on the thick metal plates that introduced the partial penetration welding method. According to the above-mentioned welding method, we could draw a conclusion that longitudinal stress and traverse stress occurred around the welding area are so minimal and do not affect any influence. We also performed the fracture behavior evaluation on the partial penetration multi pass welding with 25.4 mm thick plate by using the J-integral, which finally led us the conclusion that the partial penetration multi-pass welding method is more applicable and effective in handling the root face with less than 6.35 mm.