• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.4
• /
• pp.391-397
• /
• 2009

In this paper, longitudinal static stability is investigated, which is an essential requirement for the safety and the performance of the human powered hydrofoil boat (HPHB). In case a disturbance changes the trim angle of the boat, the derivative of the moment about the center of gravity must be negative in order to make the boat to be stable. The equation to evaluate the longitudinal static stability of the EPISODE, a HPHB of Chungnam National University with a height controlling system(HCS) is derived. From the derivative it is confirmed that a longitudinal and vertical position of the center of gravity is important for a HPHB. The range of a trim angle while the boat is foil-born was found with a HCS under the condition of mechanical restraint. And it is confirmed that the longitudinal static stability is satisfied for EPISODE in certain range of a trim angle. It is also shown that the longitudinal static stability and a range of the trim angle can be determined from the principal dimensions of a HPHB, therefore, it can be applied from the stage of the conceptual design of HPHB.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.351-359
• /
• 2007

In this study, a hierarchical switching control scheme based on robust control theory is proposed for tracking control of vehicle longitudinal acceleration in the presence of large uncertainties. A model set consisting of four multiplicative-uncertainty models is set up, and its corresponding controller set is designed by the LMI approach, which can ensures the robust performance of the closed loop system under arbitray switching. Based on the model set and the controller set, a switching index function by estimating the system gain of the uncertainties between the plant and the nominal model is designed to determine when and which controller should be switched into the closed loop. After theoretical analyses, experiments have also been carried out to validate the proposed control algorithm. The results show that the control system has good performance of robust stability and tracking ability in the presence of large uncertainties. The response time is smaller than 1.5s and the max tracking error is about $0.05\;m/S^2$ with the step input.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.418-421
• /
• 1997

A design method of robust controller for the longitudinal autopilot of BTT missile is considered. The difficulties are a set of linearized dynamic models which corresponds to different operating points has a wide range of parameters and it has even Non-Minimum Phase(NMP) zeros. In this paper, such a family of models is expressed by an interval plant. Then a robust control design method using QFT is represented. A simulation result shows that the proposed controller satisfies the given specification well.

• The Journal of Korean Medicine
• /
• v.33 no.2
• /
• pp.1-10
• /
• 2012

Objectives: This study was aimed to investigate the effect of Bojungikgitang-gagambang (BJIG) on longitudinal bone growth in rats. Methods: The BJIG treated group (300 mg/kg) and the control group (vehicle) were administered orally twice daily for 4 days. To investigate the effects of BJIG we measured body weight gain. The bone growth effect was analyzed by measuring between fluorescent lines marked with tetracycline, which plays the role of fluorescent dye on the surface of the tibia. Tetracycline was intraperitoneally injected. The height of growth plates in the epiphyseal plate was measured. The expression of bone morphogenetic protein-2 (BMP-2) and insuline-like growth factor-1 (IGF-1) was investigated by immunohistochemistry. Results: BJIG caused a significant acceleration of longitudinal bone growth of $349.7{\pm}15.9{\mu}m/day$ compared to control ($319.8{\pm}21.4{\mu}m/day$). The height of overall growth plate was not significantly more compared to the control, but the size of cells in the proliferative zone and hypertrophic zone were. In the immunohistochemistry, BMP-2 and IGF-1 were expressed markedly in the proliferative or hypertrophic zone, respectively. Conclusions: BJIG stimulated the chondrocyte hypertrophy and chondrogenesis in the growth plate and directly increased the longitudinal tibia length of rats.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.10
• /
• pp.983-990
• /
• 2008

This paper presents the fault detection and diagnosis(FDD) algorithm to enhance reliability of a longitudinal controller for an autonomous All-Terrain Vehicle(ATV). The FDD is designed to monitor and identify faults which may occur in distributed hardware used for longitudinal control, e.g., DSPs, CAN, sensors, and actuators. The proposed FDD is an integrated approach of decentralized and centralized FDD. While the former is processed in a DSP and suitable to detect faults in a single hardware, it is sensitive to noise and disturbance. On the other hand, the latter is performed via communication and it detects and diagnoses faults through analyzing concurrent performances of multiple hardware modules, but it is limited to isolate faults specifically in terms of components in the single hardware. To compensate for disadvantages of each FDD approach, two layered structure including both decentralized and centralized FDD is proposed and it allows us to make more robust fault detection and more specific fault isolation. The effectiveness of the proposed method will be validated experimentally.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.92-92
• /
• 2000

Helicopter offer the signigicant advantage over traditional air vehicles, in that the provide extended maneuverability, such as vertical climb, hovering, longitudinal and lateral flight, hovering turns and bank turns. But helicopter have the strong cross couplings and nonlinearities for each lateral, longitudinal and rotational motion mutually. However, it is possible to ignore this couplings for the hovering condition, so using this properties we can control the attitude of helicopter. That is, by implementing the dynamic of each rotational axis(roll, pitch, yaw) of independent mutually, 3-DOF(degree of Freedom) attitude control for the helicopter is possible. In this paper, we identify decoupled input-coutput relations of each three rotational axis about the helicopter mounted on the 3-DOF gimbal by experiment, and on these basis implement 3-DOF attitude controller using the PID control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.886-891
• /
• 2003

This paper deals with designing a ground-based longitudinal landing controller which is robust to datalink time delays. Time delays occur because forward velocity measurements are downlinked and the controller output commands are uplinked. An $H_{\infty}$ controller was designed by using the input/output decomposition where time delay is modeled as a first-order system with Pade approximation. Linear simulations show that the system tracks well the predefined path and is robust to the variation of time delay.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.1
• /
• pp.37-43
• /
• 2009

This paper deals with designing a ground-based longitudinal landing controller which is robust to datalink time delays. Time delays occur because forward velocity measurements are downlinked and the controller output commands are uplinked. An $H_{\infty}$ controller was designed by using the input/output decomposition where time delay is modeled as a first-order system with Pade approximation. Linear simulations show that the system tracks well the predefined path and is robust to the variation of time delay.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.3
• /
• pp.199-205
• /
• 2011

This paper presents an algorithm capable of detecting free space for the autonomous vehicle navigation. The algorithm consists of two main steps: 1) estimation of longitudinal profile of road, 2) detection of free space. The estimation of longitudinal profile of road is detection of v-line in v-disparity image which is corresponded to road slope, using v-disparity image and hough transform, Dijkstra algorithm. To detect free space, we detect u-line in u-disparity image which is a boundary line between free space and obstacle's region, using u-disparity image and dynamic programming. Free space is decided by detected v-line and u-line. The proposed algorithm is proven to be successful through experiments under various traffic scenarios.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.3
• /
• pp.73-82
• /
• 2022

Driver acceptance of autonomous driving is very important. The autonomous driving longitudinal controller, which is one of the factors affecting acceptability, consists of a high-level controller and a low-level controller. The host controller decides the cruise control and the space control according to the situation and creates the required target speed. The sub-controller performs control by creating an acceleration signal to follow the target speed. In this paper, we propose an algorithm to improve the inter-vehicle distance fluctuations that occur in the cruise control and space control switching problems in the host controller. The proposed method is to add an approach algorithm to the cruise control at the time of switching from cruise control to space control so that it is switched to space control at the correct switching distance. Through this, the error was improved from 12m error to 4m, and actual vehicle verification was performed.