• 한국광학회지
• /
• 제16권5호
• /
• pp.450-455
• /
• 2005

본 논문에서는 기존의 TE(transverse excitation) 방식과 달리 LE(longitudinal excitation) 방식을 사용하여 유전체 표면을 따라 발생하는 미끄럼 방전에 의해서도 질소레이저 발진이 가능함을 보였다. 이는 방전여기 방식인 엑시머 레이저 등의 기체 레이저에서도 미끄럼 방전을 이용한 레이저 발진이 가능함을 의미한다. 또한, 레이저빔의 형상이 공진기의 원둘레를 따라 발진이 되어 빔이 환 모양으로 출력이 됨을 보임에 따라 직사각형이나 타원형의 빔 등 폐곡선을 이루는 어떤 특정한 형태의 질소레이저 빔도 만들어 낼 수 있다는 가능성을 보였다. 레이저의 동작특성인 출력과 안정성은 TE 방식에 비해서도 뒤떨어지지 않는 다는 것을 알 수 있었으며, 공진기의 지름이 2배 증가하면 미끄럼 방전이 일어나는 표면이 2배, 체적은 4배 증가하여 그에 따른 방전간극과 유동률이 비례관계에 있음을 알 수 있었다.

• 한국진공학회지
• /
• 제17권4호
• /
• pp.322-330
• /
• 2008

유리관의 관경이 4 mm인 형광램프에서 종단방전과 횡단방전의 방전 특성, 발광 특성, 그리고 분광 특성을 상호 비교 분석하였다. 제작된 형광램프의 주입 기체는 3 종류이며, 수은 혼합 기체인 Ne(95%)+Ar(5%)+Hg(2 mg), 무수은의 순수 Xe 100% 및 Ne(96%)+Xe(4%)의 혼합 기체이다. 각 형광램프 샘플들의 기체 압력은 8 종으로 압력 범위는 $5{\sim}300\;Torr$이다. 상기 램프의 특성을 조사하기 위하여 제작된 샘플 램프의 전체 수는 주입 기체 3 가지와 각 압력 8 가지로서 총 24 개이다. 수은 형광램프는 양광주 발광을 특징으로 하는 종단방전에서 발광 휘도 및 효율이 매우 높고, 횡단방전에서는 거의 발광하지 않는다. 무수은 제논 형광램프는 횡단방전에서 비교적 높은 휘도 특성을 보이며, 종단 방전에서는 방전 전압이 높고 발광 효율도 매우 낮다. 제논 형광램프의 횡단방전은 Ne+Xe(4%)인 혼합 가스보다 압력($\sim$수 100 Torr)이 높은 순수 제논 가스의 발광 효율이 더 높다. 본 실험을 통하여 수은 램프와 무수은 제논 램프의 방전 방식의 차이를 확인하였다. 수은 형광램프는 양광주를 활용하는 종단방전의 형태로서 종래의 튜브형이 바람직하다. 무수은의 제논 형광램프는 높은 압력($\sim$수 100 Torr)의 순수 제논 기체에 대하여 방전 경로가 짧은 횡단방전을 특징으로 하는 평판형이 바람직하다.

• Journal of Korean Biological Nursing Science
• /
• 제24권4호
• /
• pp.243-252
• /
• 2022

Purpose: The purpose of this longitudinal study was to identify the relationship between the readiness for hospital discharge and self-care changes in an early stage of liver transplantation after discharge. Methods: Data of 75 liver transplant recipients within one year of surgery from a transplantation center from May 2019 to May 2020 were collected for this study. Their readiness for discharge was measured before discharge. Self-care after liver transplantation was evaluated at one week, one month, and three months of discharge at outpatient visits. Linear mixed model was used to evaluate the statistical relationship. Results: The readiness for hospital discharge was significantly higher when the caregiver was a spouse (p=.027), with fewer post-transplantation days (p=.027), absence of acute rejection (p=.004), or high self-efficacy (p<.001). As a result of the linear mixed model analysis, the higher the discharge readiness score, the higher the self-care score (β=0.29, p<.001). However, after three months, their self-care had decreased regardless of their level of readiness for hospital discharge compared to one week after discharge. Conclusion: Improving the readiness before discharge is essential to enhance self-care. Also, active intervention at 3 months of discharge should be performed to check and promote their long-term self-care.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.948-955
• /
• 2003

Pressure coefficient in rotating discharge hole was measured to gain insight into the influence of rotation to the discharge characteristics of rotating discharge hole. Pressure measurements were done by the telemetry system that had been developed by the authors. The telemetry system measures static pressure using piezoresistive pressure sensors. Pressure coefficients in rotating discharge hole were measured in longitudinal direction and circumferential direction with various rotating speed and 3 pressure ratios. From the results, the pressure coefficient, and therefore the discharge coefficient, is known to decrease with the increase of Ro number owing to the increase of flow approaching angle to the discharge hole inlet. However, there exists critical Ro number where the decrease rate of discharge coefficient with the increase of Ro number changes abruptly; flow separation occurs from the discharge hole exit at this critical Ro number. Critical Ro number increases with the increase of length-to-diameter ratio, but the increase is small where the length-to-diameter ratio is higher than 3. The decrease rate of discharge coefficient with the increase of Ro number depends on the pressure recovery at the discharge hole, and the rate is different from each length-to-diameter ratio; it has tendency that the short discharge hole shows higher decrease rate of discharge coefficient.

• 설비공학논문집
• /
• 제12권8호
• /
• pp.763-770
• /
• 2000

In tunnel ventilation, the Purpose of ventilation control is to keep the required pollution level with minimum consumption of energy But tunnel ventilation has large disturbances caused by discharge of pollutants, traffic forces especially strong for longitudinal ventilation. Hence in this paper, the tunnel ventilation control logic applying fuzzy control theories is proposed and the simulation program of tunnel ventilation control is developed. The characteristics of longitudinal ventilation with jet fans are estimated and the effect of the proposed tunnel ventilation control is verified by the simulation program.

• 한국염색가공학회지
• /
• 제9권1호
• /
• pp.15-22
• /
• 1997

The alkali treated and black dyed PET fabrics were sputter etched under Ar gas atmosphere. The color depth of PET fabrics were increased with sputter etching time only under some limits of discharge power. And above that limits of discharge power the color depth of PET fabrics was decreased by increasing discharge power and treatment time. Minute cracks were made by sputter etching in the whole surface of fabrics to the direction of perpendicular to the longitudinal side of yarns. The fineness and density of minute crack were increased with lowering discharge power. And the size of crack was far smaller than that of microcrater which was obtained by alkali treatment. It is considered that the increase of color depth is related to the minute crack. The water permeation time of sputter etched fabrics was increased with increasing discharge power and treating time. The increase of color depth attained by sputter etching was fully kept through repeated laundering.

• 복합신소재구조학회 논문집
• /
• 제7권1호
• /
• pp.19-24
• /
• 2016

Most of the soundproof tunnels generate significant discharge noise through their inlets and outlets so that the length of the tunnel has been extended frequently than required to minimize the effect on such discharge noise. Thus, in this paper, we investigate reduction capability of discharge noise from the sound proof tunnel installed with lateral sound-absorbing panels on the partitioned truss members in the longitudinal direction of the tunnel. In conclusion, noise field analysis results shows that the sound proof tunnels with lateral sound-absorbing panels have an effect on discharge noise abatement and thereby tunnel's length reduction.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1248-1255
• /
• 2003

Pressure coefficient in a rotating discharge hole was measured to gain insight into the influence of rotation on the discharge characteristics of rotating discharge holes. Pressures inside the hole were measured by a telemetry system that had been developed by the authors. The telemetry system is characterized by the diversity of applicable sensor type. In the present study, the telemetry system was modified to measure static pressure using piezoresistive pressure sensors. The pressure sensor is affected by centrifugal force and change of orientation relative to the gravity. The orientation of sensor installation for minimum rotating effect and zero gravity effect was found out from the test. Pressure coefficients in a rotating discharge hole were measured in longitudinal direction as well as circumferential direction at various rotating speeds and three different pressure ratios. From the results, the behaviors of pressure coefficient that cannot be observed by a non-rotating setup were presented. It was also shown that the discharge characteristics of rotating discharge hole is much more influenced by the Rotation number irrespective of pressure ratio.

• 한국수자원학회논문집
• /
• 제52권1호
• /
• pp.1-10
• /
• 2019

본 연구에서는 분류부 흐름에 대한 TELEMAC-2D 2차원 수치모형의 적용성을 검증하고, 수치실험을 통한 분류유량비 계산식의 비교분석, 분류유량비 변화에 따른 분류부 흐름특성 변화를 분석하였다. 본 수치모형은 분류부 수심평균 유속분포와 수위에 대해 실내실험결과와 잘 일치하는 결과를 나타냈다. 주수로의 하류방향 관성력과 모멘트가 감소하면 분류유량비가 증가하게 되고, 분류수로에서 상대적인 고유속 분포구간은 넓어지며, 분류수로 주흐름의 역방향 유속은 감소한다. 분류유량비가 증가할수록 분류수로 내 흐름분리구역 규모는 감소하며, 흐름분리구역 규모 산정시 유선분포 작도뿐만 아니라 종방향 프루우드 수가 $Fr{\approx}0$이 되는 지점 확인으로 더 명확하게 산정할 수 있다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권12호
• /
• pp.568-572
• /
• 2003

A longitudinal discharge heated copper vapor laser with internal diameter 28 mm and discharge length 1.3 m has been constructed and tested. At the discharging voltage 15.2 kV, pulse repetition rate 10 kHz, buffer gas pressure 40 mbar, and internal temperature of the laser plasma tube $1520^{\circ}C$, it delivers more than 30 W average laser outputs.