• 제목/요약/키워드: Longevity of fixed restorations

검색결과 3건 처리시간 0.017초

국내에서 제작된 고정성 보철물의 수명과 실패 요인 및 양상 (LONGEVITY AND FAILURE ANALYSIS OF FIXED RESTORATIONS SERVICED IN KOREA)

  • 신우진;전영식;이근우;이호용;한동후
    • 대한치과보철학회지
    • /
    • 제43권2호
    • /
    • pp.158-175
    • /
    • 2005
  • Statement of problem. Every effort has been continually made to obtain objectivity in measuring the longevity of fixed restorations, such as by establishing unified judgement standard for deciding success and adopting statistical method that analyzes the data of successful and failed cases at the same time. In Korea, however desired level of development has not to be made in this field yet. Purpose. This study, adopting California Dental Association (CDA) quality evaluation system, established objective standard for deciding success, and inferred the longevity of fixed restorations and their failure analysis through adopting Kaplan-Meier survival analysis. Material and method. In order to assess the longevity of flxed restorations serviced in Korea and causes of failure, a total of 1109 individuals (aged 15-74, 716 women and 393 men loaded with 2551 unit fixed restorations, and 1934 abutments) who lived in Kyung-In Province were examined and the findings were as follows : Results. 1. Length of service of fixed restorations serviced in Korea was 6.86$\pm$0.15 yr (mean), 5.5 yr (median), and the rate of success was 65.82% in 5 year survival, and 21.15% in 10 year survival. 2. When there was patient's need for replacing old prosthetics, longevity of fixed restorations was 7.51$\pm$0.27 yr (mean), 7 yr (median), and the rate of success was 61.08% in 5 year survival, and 17.57% in 10 year survival. 3. Longevity of fixed restorations was longest in the over-sixty age group(9.21$\pm$0.66) and that of the teen age group(3.39$\pm$0.28) was shortest (p<0.05). 4. Longevity of fixed restorations of women (7.38$\pm$0.18 years) was longer than that of men (6.00$\pm$0.26) (p<0.05). 5. As for the provider factor (such as unlicensed performers, university hospitals, and private clinic), there was no statistically significant difference in longevity of fixed restorations. 6. Defective margin (34.78%). periodontal disease (12.15%), periapical involvement (11.73%), was the most frequent causes of failure and poor esthetics group showed the longest life above all (p<0.05). Actual frequent causes of failure after removing old prosthetics were defective margin, periapical involvement, periodontal disease and uncemented restoration. In 75.67% of the cases, abutment state after removing old prosthetics was good enough for loading another prosthetics. 7. There was found to have statistically significant influence between longevity of single crown (6.35$\pm$0.20 yr) and that of 3 unit fixed restorations (7.60$\pm$0.30 y) (p<0.05). In each case the most frequent cause of failure was defective margin. 8. The number of cantilever pontic, pontic/abutment ratio, oral hygiene status were found to have no statistically significant influence on longevity of fixed restorations in all groups (p>0.05). 9. Longevity of fixed restorations made of non precious metal was longest (9.60$\pm$0.40 yr) semi precious and precious trailing behind(p<0.05). 10. Group function group (37.04%) and partial group function group (44.62%) were predominant in frequency but showed no correlation between them and among different types of occlusal plane and different types of occlusal surface (p>0.05). 11. Longevity of fixed restorations was longest in the centric interference group(9.35$\pm$0.62) (p<0.05) among different types of occlusal interference. Conclusion. We found that longevity of fixed restorations serviced in Korea is affected by age, gender and type of material, and that most frequent cause of failure is defective margin. In order to assess the accurate longevity of axed restorations, unified research design. overcoming inter-observer difference and establishing the objective research items are needed. Furthermore, it is thought that prospective approach through thorough study and regular follow-ups is needed just from the start of research. Nationwide detailed studies on length of service of fixed restorations manufactured in Korea are hoped to be conducted hereafter.

고정성 보철물과 연관된 합병증과 실패에 관한 조사 (Complication and Failure Analysis of Fixed Restorations)

  • 윤미정
    • 구강회복응용과학지
    • /
    • 제27권2호
    • /
    • pp.149-159
    • /
    • 2011
  • 고정성 보철물의 장기적 예후를 보장하고자 하는 많은 노력에도 불구하고, 아직도 임상에서는 부적절한 제작 및 유지 관리로 인한 다양한 고정성 보철물의 합병증이 관찰되고 있다. 이에 본 연구에서는 고정성 보철물의 임상적 상태를 조사하여 보철 진료의 임상적 참고 자료와 연구의 기초 자료로 도움이 되고자하였다. 2009년 1월에서 2009년 12월까지 12개월간 부산대학교병원 치과 보철과에 내원한 환자 중 기존의 고정성 보철물을 철거하고 치료를 시행한 환자를 대상으로 고정성 보철물과 지대치에 연관된 임상적 상태를 조사 평가하여 다음과 같은 결과를 얻었다. 1. 전체 고정성 보철물의 추정 수명은 10.0년이었고, 평균 장착 기간은 $10.3{\pm}5.5$년이었다. 2. 악골에 따른 수명의 차이는 없었으나 (P>.05), 전후방 위치에서는 전치부 또는 구치부에 비해 전치부와 구치부를 포함하는 보철물의 수명이 가장 길었다 (P<.05). 3. 고정성 보철물의 재료별 수명은 금속관이 가장 길었고 (P<.05), 다른 재료들 간에는 유의한 차이가 없었다 (P>.05). 4. 고정성 보철물의 크기는 보철물 수명에 영향을 미치지 않았다 (P>.05). 5. 대합치 조건별 고정성 보철물의 수명은 자연치와 고정성 보철물, 가철성 국소 의치, 총의치 순으로 길었다 (P<.05). 6. 고정성 보철물의 생물학적 합병증은 치주 질환 (37.5%), 치아 우식증 (19.0%), 그리고 치수 질환 (10.8%) 순이었고, 기계적 문제점은 변연 결함 (18.4%), 보철물 파절(4.2%), 유지력 상실 (3.9%), 치아 파절 (3.6%), 그리고 식편 압입 (2.6%) 순이었다. 보철물을 철거한 후 치대치의 33.1%는 재수복이 불가능한 상태였다.

Pressed ceramic technique을 이용하여 제작되는 완전 도재관 완전 구강 회복 증례 (Full-mouth rehabilitation with pressed ceramic technique using provisional restorations)

  • 노현식;우이형;배아란
    • 대한치과보철학회지
    • /
    • 제51권1호
    • /
    • pp.47-51
    • /
    • 2013
  • 골유착성 임플란트의 등장으로 결손치의 수복이 가능하게 되어 전통적인 고정성 또는 가철성 국소의치가 임플란트로 대체되어가고 있는 추세이다. 특히 젊은 환자의 경우 보철물의 수명과 함께 심미적인 결과를 고려해야 한다. 임플란트는 장기간의 성공적인 치료 결과와 함께 기능적인 회복을 이룰 수 있으나, 치은 퇴축으로 인한 변연부 노출, 치간 유두 상실로 인한 비심미적인 연조직, 금속 지대주, 상부 도재관의 투명도 감소 등은 임플란트 수복 시 정상적인 저작 기능 회복은 이룰 수 있으나 심미적으로는 불리한 결과를 보일 수 있다. 최근 CAD/CAM technology를 이용한 지르코니아는 충분한 강도와 파절 저항성을 가져 정상적인 저작 기능이 가능하고, 뛰어난 굴곡강도로 고정성 보철물, 가철성 의치 보철물에 다양하게 응용되며, 생체 적합성이 뛰어나고, 색조 재현성에서도 금속에 비해 심미적인 결과를 보이며 전치부와 구치부의 보철 치료에 이용되고 있다. 그리고 pressed ceramic technique을 이용한 전부 도재 보철 수복은 기존의 전통적인 도재 축성 과정보다 우수한 파절 저항성을 보인다. Pressed ceramic technique 은 상부의 도재 축성 과정이 왁스업을 통해 용융, 주조 되어 최종 보철물의 형태를 왁스업 단계에서 조절할 수 있는 장점이 있다. 임플란트를 포함한 본 증례의 보철 수복은 임시 보철물의 치경부 형태를 조절하여 심미적인 연조직을 재현하고자 하였고, 임시 보철물의 형태를 왁스업으로 복제하여 원하는 형태의 최종 보철물을 제작하였다. 본 증례에서는 임플란트 치료에 있어서 지르코니아와 pressed ceramic technique을 적용하여 기능적이고 심미적으로 양호한 결과를 얻었다.