• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.829-836
• /
• 2019

IoT devices are widely used in network construction and are increasing. If necessary, heterogeneous IoT devices are used for data transmission. This paper proposes to prevent the method of data loss due to differences in throughput when the local network is constructed by Bluetooth 5 and long range network does by LoRa(Long Range). Data loss occur when the data transmits through LoRa, due to the throughputs of Bluetooth 5 faster than that of LoRa. The prevent method proposed by this paper can apply not only Bluetooth 5 and LoRa but heterogeneous IoT devices and expect to prevent data loss due to differences in throughput between heterogeneous IoT devices. Also, this paper shows the simulation result by applying the proposed avoid method. In this paper, two way to the preventive method shows the data transmission ratio and amount of memory that of necessity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1654-1661
• /
• 2020

Internet of Things(IoT) technology can remotely collect and control a sensing information of device by attaching a small communication device to equipment that does not support communication. Low-Power Wide-Area Network (LPWAN), a low-power, long-distance communication technology, was proposed to support IoT technology, and Long Range(LoRa) is representative. Various systems, including network device, can collect and control the status information of device in real time through remote access. However, when a network failure occurs, remote access and status monitoring are impossible unless there is a separate additional network. To overcome this problem, in this paper, we propose an independent remote device management system that can be easily attached to device, which monitors and controls equipment remotely using an independent network. We will design and implement the proposed system, via which we will show its practicality and expandability.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.662-671
• /
• 2016

In this paper, we propose a wireless video transmission system, providing medium and long communication distance in the 5.8GHz band to decrease the loss of video data. Beamforming with multiple antennas in a radio environment to enable more than 10km communication distance and an image transmission method that combines the retransmission to MCS(modulation and coding scheme) are applied. By applying the proposed method in the indoor environment of 80dB attenuation using the payload size of 1000 bytes, the packet loss rate of at least 0.92% is achieved through the FPING with the time-out of 10ms. The transmission distance of 21.2Km is achieved with the transmission rate of 13Mbps in the outdoor environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.3
• /
• pp.333-343
• /
• 2009

Tactical Information Communication Network(TICN) is a concept-type integrated Military Communication system that enables precise command control and decision making by unifying the diversified military communication network and conveying diverse range of battle field information on real-time, at right place at right time. TICN is designed to advance into high speed, large capacity, long distance wireless relay transmission. To support mobility in battlefield environments, the application of Ad-hoc networking technology to its wireless communication has been examined. Ad-hoc network is consist of mobile nodes and nodes in the network depends on the cooperation of other nodes for forwarding of packets. In this context, some non-cooperating nodes may delay forwarding of packets or drop the packets. This may hamper the network as a whole and disrupt communication between the cooperating nodes. To solve this problem, we present a solution with a Node Weight Management Server(NWMS), which manages each node's weight according to its behavior in local area. When the NWMS detects misbehaving node, it increases the node's weight. If the node's weight exceeds a predefined threshold then the NWMS broadcasts the node's information into network to isolate the misbehaving node from the network. These mechanisms show that they are highly effective and can reliably detect a multitude of misbehaving node.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.4
• /
• pp.1812-1824
• /
• 2019

The location and human activity are usually used as one of the important parameters to monitor the health status in healthcare devices. However, nearly all existing location and monitoring systems have the limitation of short-range communication and high power consumption. In this paper, we propose a new mechanism to collect and transmit monitoring information based on LoRa technology. The monitoring device with sensors can collect the real-time activity and location information and transmit them to the cloud server through LoRa gateway. The user can check all his history and current information through the specific designed mobile applications. Experiment was carried out to verify the communication, power consumption and monitoring performance of the entire system. Experimental results demonstrate that this system can collect monitoring and activity information accurately and provide the long rang coverage with low power consumption.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.463-474
• /
• 2015

Future Ground Control Stations (GCSs) for Unmanned Aerial Vehicles (UAVs) teleoperation targets better situational awareness by providing extra motion cues to stimulate the vestibular system. This paper proposes a new virtual environment for long range Unmanned Aerial Vehicle (UAV) control via Non-Line-of-Sight (NLoS) communications, which is based on motion platforms. It generates motion cues for the teleoperator for extra sensory stimulation to enhance the guidance performance. The proposed environment employs the distributed component simulation over GSM network as a simulation platform. GSM communications are utilized as a multi-hop communication network, which is similar to global satellite communications. It considers a UAV mathematical model and wind turbulence effects to simulate a realistic UAV dynamics. Moreover, the proposed virtual environment simulates a Multiple Axis Rotating Device (MARD) as Human Machine Interface (HMI) device to provide a complete delay analysis. The demonstrated measurements cover Graphical User Interface (GUI) capabilities, NLoS GSM communications delay, MARD performance, and different software workload. The proposed virtual environment succeeded to provide visual and vestibular feedbacks for teleoperators via GSM networks. The overall system performance is acceptable relative to other Line-of-Sight (LoS) systems, which promises a good potential for future long range, medium altitude UAV teleoperation researches.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2019-2029
• /
• 2009

There are several MCS(Monitoring, Control and Surveillance) systems for maritime safety and security in Korea; VMS (Vessel Monitoring System) that based on the AIS(Automatic Identification System), and the LRIT(Long-Range Identification and Tracking), the Vessel Free Pass System that based on the RFID(Radio Frequency IDentification), the Fisheries Information Network that provided by the National Federation of Fisheries Cooperatives. This paper surveys the fundamental technologies of MCS systems, and compares the role and function of them. It also surveys the development direction of each systems and research topics for cooperation of them.

• Smart Structures and Systems
• /
• v.31 no.3
• /
• pp.301-309
• /
• 2023

Tilt is a key indicator of structural safety. Real-time monitoring of tilt responses helps to evaluate structural condition, enable cost-effective maintenance, and enhance lifetime resilience. This paper presents a prototype wireless sensing system for structural tilt measurement. Long range (LoRa) technology is adopted by the sensing system to offer long-range wireless communication with low power consumption. The sensor integrates a gyroscope and an accelerometer as the sensing module. Although tilt can be estimated from the gyroscope or the accelerometer measurements, these estimates suffer from either drift issue or high noise. To address this challenging issue and obtain more reliable tilt results, two sensor fusion algorithms, the complementary filter and the Kalman filter, are investigated to fully exploit the advantages of both gyroscope and accelerometer measurements. Numerical simulation is carried out to validate and compare the sensor fusion algorithms. Laboratory experiment is conducted on a simply supported beam under moving vehicle load to further investigate the performance of the proposed wireless tilt sensing system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.417-419
• /
• 2016

Internet of things(IoT) services should be available to provide unattended operation in a remote area, long battery life, low-cost infrastructure, two-way communication platform. Urban transit in Busan is made up of the wire-based infrastructure except for voice infrastructure of transmit/receive and new data infrastructure is required for Internet of things(IoT) services. Urban transit environments in Busan were analyzed in order to apply LoRa Wireless Network(the standard communication way of IoT) and proposes a building after a Disaster Evacuation System.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.115-118
• /
• 2003

In this paper, we analysed the technical characteristics of power line communications interfering marine mobile services. The various radio services including marine mobile potentially affected by unwanted radiation from telecommunication networks as PLT, VDSL, ADSL, etc. The radio spectrum is unique resource. In particular, the frequency range below 30MHz has extremely favourable propagation conditions allowing economic long range as well as low power communication radio services. The paper were as follows to identify marine mobile service that are likely to be affected by PLC and evaluate the protection needs and to investigate methods of measuring the emissions from PLC.