• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.29-39
• /
• 2004

The prediction of landfill settlement is very important for managing land properly, especially in small national land like Korea. It is difficult to express settlement using the consolidation theory because biochemical decomposition is main reason of settlement, and organic materials in landfill are decomposed far long time. In this study, LFG (Landfill Gas) generation characteristics are studied to find long-term settlement analysing model landfills. Two lysimeters are made; one is leachate recycled, and the other is not leachate recycled. The relationship between gas generation and settlement is analysed as a function of time. A mathematical gas generation model is suggested to predict long-term settlement due to biodegradation, and correction coefficient is recommended for long term settlement through model tests. The leachate recirculation system is more effective to accelerate landfill settlement. The appropriate coefficients of gas correction for non-recycled leachate model are 1.4 and 1.7 for recycled system from tests showing 22% of acceleration.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.10
• /
• pp.29-38
• /
• 2022

Ready-made Garments (RMG) export earnings, which are almost 80% of the total exports of Bangladesh, have been recognized as one of the main catalysts for the recent development of the country. Therefore, the need to determine whether the RMG export had served as a mechanism for increasing the GDP growth as well as the economic development of the country is topical and pressing. We have applied the Johansen Co-integration test and Vector Error Correction Model (VECM) to reveal the linkage of RMG export earnings and other variables with the GDP growth rate in Bangladesh. Using data from 1990 to 2020 for Bangladesh, we have found long-run as well as short-run associations among RMG Export earnings, Foreign Direct Investment (FDI), and GDP growth. A co-integration among the variables is validated through the Johansen Co-integration test. Moreover, a causal correlation running from RMG export earnings to GDP was revealed by the Granger causality test in the long run. Finally, we estimated impulse response functions to observe the variations of model variables in response to a shock. Our result supports the proposition that RMG export earnings are one of the main growth engines in Bangladesh and this sector leads growth in other sectors also in the long term.

• Physical Therapy Korea
• /
• v.30 no.3
• /
• pp.174-183
• /
• 2023

Background: Office workers experience neck or back pain due to poor posture, such as flexed head and forward head posture, during long-term sedentary work. Posture correction is used to reduce pain caused by poor posture and ensures proper alignment of the body. Several assistive devices have been developed to assist in maintaining an ideal posture; however, there are limitations in practical use due to vast size, unproven long-term effects or inconsistency of maintaining posture alignment. We developed a headphone and necklace posture correction system (HANPCS) for posture correction using an inertial measurement unit (IMU) sensor that provides visual or auditory feedback. Objects: To demonstrate the test-retest reliability and concurrent validity of neck and upper trunk flexion measurements using a HANPCS, compared with a three-dimensional motion analysis system (3DMAS). Methods: Twenty-nine participants were included in this study. The HANPCS was applied to each participant. The angle for each action was measured simultaneously using the HANPCS and 3DMAS. The data were analyzed using the intraclass correlation coefficient (ICC) = [3,3] with 95% confidence intervals (CIs). Results: The angular measurements of the HANPCS for neck and upper trunk flexions showed high intra- (ICC = 0.954-0.971) and inter-day (ICC = 0.865-0.937) values, standard error of measurement (SEM) values (1.05°-2.04°), and minimal detectable change (MDC) values (2.92°-5.65°). Also, the angular measurements between the HANPCS and 3DMAS had excellent ICC values (> 0.90) for all sessions, which indicates high concurrent validity. Conclusion: Our study demonstrates that the HANPCS is as accurate in measuring angle as the gold standard, 3DMAS. Therefore, the HANPCS is reliable and valid because of its angular measurement reliability and validity.

• Korea Trade Review
• /
• v.43 no.5
• /
• pp.159-177
• /
• 2018

The container shipping sector is an important international logistics operation that connects open economies. Freight rates rapidly change as the market fluctuates, and staff related to the shipping market are interested in factors that determine freight rates in the container market. This study uses the Vector Error Correction Model(VECM) to estimate the impact of factors affecting container freight rates. This study uses data published by Clarksons. The analysis results show a 4.2% increase in freight rates when world container traffic increases at 1.0%, a 4.0% decrease in freight rates when volume of container carriers increases by 1.0%, a 0.07% increase in freight rates when bunker price increases by 1.0%, and a 0.04% increase in freight rates accompanying 1.0% increase in libor interests rates. In addition, if the current freight rate is 1.0% higher than the long-term equilibrium rate, the freight rate will be reduced by 3.2% in the subsequent term. In addition, if the current freight rate is 1.0% lower than the long-term equilibrium rate, the freight rate will decrease by 0.12% in the following term. However, the adjusting power in a period of recession is not statistically significant which means that the pressure of freight rate increase in this case is neglectable. This research is expected to contribute to the utilization of scientific methods in forecasting container freight rates.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1011-1015
• /
• 2005

Fully digital controlled 20-bit magnet power supplies have been developed and successfully tested for closed orbit correction of PLS(Pohang Light Source). The new digital power supply has used fiber optics for 25kHz switching of IGBT drivers, and implemented DSP, ADC, Interlock, DCCT cards in a compact 3U-sized 19" chassis. Input/Output low-pass filters suppress harmonics of 60Hz line frequency and switching frequency noise effectively. Overall performance of the power supplies have been demonstrated as +/- 2ppm short-term stability(<1 min), and +/- 10ppm long-term stability(<36 hours). All the existing 12-bit 70 power supplies for vertical correction magnets will be replaced with new digital power supplies during 2005 summer shutdown period. In this paper, we will describe the hardware structure and control method of the digital power supply and the experimental results will be shown.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.265-273
• /
• 2007

This paper expands an analytical performance model of 802.11 to accurately estimate throughput and energy demand of 802.11-based wireless sensor network (WSN) when sensor nodes employ Reed-Solomon (RS) codes, one of block forward error correction (FEC) techniques. This model evaluates these two metrics as a function of the channel bit error rate (BER) and the RS symbol size. Since the basic recovery unit of RS codes is a symbol not a bit, the symbol size affects the WSN performance even if each packet carries the same amount of FEC check bits. The larger size is more effective to recover long-lasting error bursts although it increases the computational complexity of encoding and decoding RS codes. For applying the extended model to WSNs, this paper collects traffic traces from a WSN consisting of two TIP50CM sensor nodes and measures its energy consumption for processing RS codes. Based on traces, it approximates WSN channels with Gilbert models. The computational analyses confirm that the adoption of RS codes in 802.11 significantly improves its throughput and energy efficiency of WSNs with a high BER. They also predict that the choice of an appropriate RS symbol size causes a lot of difference in throughput and power waste over short-term durations while the symbol size rarely affects the long-term average of these metrics.

• Neonatal Medicine
• /
• v.25 no.4
• /
• pp.170-177
• /
• 2018

Purpose: Preterm infants frequently require red blood cell (RBC) transfusions in neonatal intensive care units (NICU). Storage RBCs undergo many changes during storage periods. We aimed to compare the hemoglobin (Hb) correction effect according to the period of RBC storage and investigate the factors influencing Hb correction. Methods: This retrospective study reviewed the medical records of 289 patients who received RBC transfusion more than once in the NICU of Kosin University Gospel Hospital between February 2006 and March 2016. The subjects were classified into two storage groups: short-term (${\leq}7days$, n=88) and long-term (>7 days, n=201), according to the period of RBC storage. We checked Hb levels by complete blood cell count tests conducted within 2 days before and 5 to 9 days after the first transfusion. We compared the Hb difference between the two groups and analyzed the factors influencing Hb correction. Results: Excluding the use of an invasive ventilator, there was no significant difference between the two groups in terms of clinical characteristics. There was no significant difference in the Hb correction effect between the two groups (P=0.537). Birth weight greater than 1,500 g, higher weight at transfusion, and larger volume of transfusion were significant prognostic factors affecting greater changes in Hb. In addition, surgery experience, higher Hb level at transfusion, and additional blood tests were found to be significantly associated with less changes in Hb. Conclusion: The RBC storage period did not affect the Hb correction effect. The Hb correction effect may be diminished in infants with lower birth weight and lower weight at transfusion under unstable clinical conditions.

• KDI Journal of Economic Policy
• /
• v.32 no.4
• /
• pp.35-73
• /
• 2010

This paper examines consumption dynamics in relation to asset prices in Korea. Empirical analysis based on the error correction model shows that personal consumption is affected by changes in asset prices but the consumption converges to the long-run level of consumption corresponding to the total income flow in two years. This adjustment in consumption implies that the consumption error, reflected in the error correction term, should have predictability for the future consumption growth during the adjustment period. It is found that the error correction term has a long-run predictability for consumption over up to about 3 years; thus, confirming the error correction model. It is also found that housing prices have larger effects on consumption compared with stock prices in Korea. In addition, the effects of income and asset prices on consumption show bigger effects during contractionary period than expansionary period in business cycles. This paper also analyzes effects of asset wealth that reflects changes in both price and quantity. It is found that asset wealth has a long-run effect on consumption in addition to total income as determinants of consumption. Since wealth effects usually indicate the long-run effect of changes in asset wealth on consumption that is not explained by labor income, which is the proxy for human source of wealth, it is estimated with labor income used as a control variable. According to the estimation, the marginal propencity to consume out of asset wealth is approximately 2%. It means that 1,000won increase in asset wealth may lead to 20 won increase in consumption.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.41-64
• /
• 2011

This article investigates the interrelationships in daily returns using fractionally integrated error correction term and volatilities using constant conditional correlation and dynamic conditional correlation GARCH with asymmetries between Capesize and Panamax markets. Our findings are as follows. First, for the fractionally cointegrated error correction model, there is a unidirectional relationship in returns from the Panamax market to the Capesize market, but a bidirectional causal relationship prevails for the traditional error correction models. Second, the coefficients for the error correction term are all statistically significant. Of particular interest are the signs of the estimates for the error correction term, which are all negative for the Capesize return equation and all positive for the Panamax return. Third, there are bidirectional volatility spillovers between both markets and the direction of the information flow seems to be stronger from Panamax to Capesize. Fourth, the coefficients for the asymmetric term are all significantly positive in the Capesize market, but the Panamax market does not have a significant effect. However, the coefficients for the asymmetric term are all significant, implying that the leverage effect does exist in the Capesize and Panamax markets.

• International Journal of Concrete Structures and Materials
• /
• v.2 no.2
• /
• pp.91-98
• /
• 2008

Curved bridges are important components of a highway transportation network for connecting local roads and highways, but very few data have been collected in terms of their field performance. This paper presents two-years monitoring and system identification results of a curved concrete box-girder bridge, the West St. On-Ramp, under ambient traffic excitations. The authors permanently installed accelerometers on the bridge from the beginning of the bridge life. From the ambient vibration data sets collected over the two years, the element stiffness correction factors for the columns, the girder, and boundary springs were identified using the back-propagation neural network. The results showed that the element stiffness values were nearly 10% different from the initial design values. It was also observed that the traffic conditions heavily influence the dynamic characteristics of this curved bridge. Furthermore, a probability distribution model of the element stiffness was established for long-term monitoring and analysis of the bridge stiffness change.