• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.10-20
• /
• 2009

The objective of this study is to investigate the efficacy of leaf powder colorants as substitutes for traditional fresh juice extract dyeing. Three kinds of leaf powder colorants were prepared by freeze drying method with or without deep freezing as pre-treatment: one powder colorant from fresh leaf juice with deep freezing; two kinds of powder colorant from fresh leaves with and without deep freezing. Their dyeing properties and storage stabilities were studied and compared with the traditional fresh juice extract dyeing. The presence of indigo in the powder colorants was confirmed by UV/Visible absorption spectra. They showed absorption peak at 602nm which was same with indigo absorption peak. Dyeing was done at low temperature around 6$^{\circ}C$. All three powder colorants produced B colors on silk fabrics, showing similar color to the one dyed traditionally with fresh juice extract. The powder colorants from leaves gave higher color strength than the powder from leaf juice. The powder colorant prepared from leaves with deep freezing was the most stable for long term storage as its color and color strength were not changed after 360 days. So, this was used for further dyeing to study the effects of concentration and repeat dyeing on color strength and colorfastness. Fastnesses to dry cleaning and rubbing were fairly good above 4 rating. Further study is needed to improve light fastness. It was concluded that the leaf powder colorant with deep freezing could be used as a substitute for traditional juice extract dyeing at all seasons.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.23-32
• /
• 2009

The objective of this study is to investigate the efficacy of leaf powder colorants as substitutes for traditional indigo dyeing. Leaf powder colorants were prepared by hot air($50^{\circ}C$) and room temperanrre($25^{\circ}C$) drying methods from fresh leaves. The presence of indigo in the leaf powder colorants was confirmed by UV/Visible absorption spectra. All the powder colorants showed broad absorption at 602 nm as same as synthetic indigo. Dyeing was done by reduction method with sodium hydrosulfite and sodium hydroxide. Leaf powder colorants produced blue color on silk fabrics, showing similar color to the one dyed traditionally with fresh juice extract. The powder colorants prepared at room temperature drying were more stable for long term storage than that prepared by hot air drying. Thus, the powder colorants prepared by room temperature drying was reduced and dyed in one-step process without sodium hydroxide in the dyebath for further investigate dyeing properties. K/S value of the fabric dyed without sodium hydroxide was much higher than one dyed with sodium hydroxide. Regardless of the addition of sodium hydroxide, rubbing fastness was fairly good showing above 4 rating. Fastness to dry cleaning and light of the fabrics dyed without sodium hydroxide were mote higher than that dyed in alkaline condition.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.93-98
• /
• 2011

Saline corrosion is one of the major degradation mechanisms for stainless steel type 304 (SS304) dry storage cask during the spent fuel interim storage period. Slow strain rate test (SSRT) and neutral salt spray test (NSS) were performed at $85^{\circ}C$ and $200^{\circ}C$ with 0.5 wt% sodium chloride mist sprayed on the cold-rolled SS304 specimens of different degrees of reduction in this study. The weight changes of the NSS specimens tested at $85^{\circ}C$ for 2000 hours differed greatly from those at $200^{\circ}C$. The weight loss of NSS specimens was not significant at $85^{\circ}C$ but the weight gain decreased gradually with increasing the cold-rolled reduction. The yield strength (YS) and ultimate tensile stress (UTS) values obtained from the SSRT tests for lightly cold-rolled specimens in the salt spray environment at $85^{\circ}C$ and $200^{\circ}C$ are slightly lower than in air. But for those with 20% reductions, the specimen strengths were no longer changed by the saline corrosion. The preliminary results demonstrated that the quality and performance of cold-rolled SS304 is acceptable for fabrication of dry storage casks. However, more work on the corrosion behavior of cold-rolled stainless steel in the saline atmosphere is needed to better understand its long-term performance.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.55-60
• /
• 1996

Tripitaka Koreana were made during Coryo Dynasty from 1236 to 1251 A.D. Buddhist scriptures were engraved on 81.340 wooden plates. Some plates were varnished with Rhus lacquer, but most of them were uncoated. Macroscopically, most of the plates appeared intact due to the storage in a well-ventilated wooden house. Because, they were irregularly used for printings with ink, it can be assumed that they were repeatedly exposed to ink-water and drying processes. The present were made to examine the changes of wood cell structures occurred during long-term aging deterioration processes in these dry archaeological wooden plates. Light, scanning and transmission electron microscopes were employed for this study. Wedge-shaped cracks and delamilations were found from the lumen side toward the compound middle lamellae and they progressed toward primary or secondary walls. A large amount of hypae in vessels and the degradation of vessel-ray pit walls by the fungal hyphae were observed. When compared to the recent wood, the birefringence of wood fibers was considerably lower or completly disappeared, suggesting the degradation of crystalline cellulose in these wood samples. The degradation of the cell wall could be also revealed the calculation of crystallinity with X-ray diffraction and the size of crystalline region was estimated.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3398-3405
• /
• 2021

This study observed the effect of neutron irradiation and ageing on the microstructure, hardness, and corrosion resistance of SAV-1 (Al-Mg-Si) alloy. The investigated material was irradiated with neutrons to fluences of 10²¹-10²⁶ n/m² in the WWR-K research reactor and kept in dry storage. Long-term irradiation led to an increase in hardness of the alloy and a deterioration of pitting corrosion resistance. Post-irradiation ageing for 1 h at 100-300 ℃ resulted in a decrease in microhardness of the irradiated SAV-1. The effect of post-irradiation ageing on pitting corrosion was made clear through the formation of Guinier-Preston zones and secondary precipitates in the Al matrix. Ageing at 250 ℃ corresponded to the development of stable microstructure and the highest corrosion resistance for the irradiated samples. Mg₂Si, Si, and needle-shaped β" precipitates were formed in SAV-1 alloy that was irradiated with low fluences. β" and clusters of rod-shaped B-type precipitates were observed in highly irradiated samples. The precipitates were similar to those seen in non-irradiated pseudo-binary Al-Mg₂Si alloys with Si excess.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.421-427
• /
• 2006

To investigate the relationships among the traits related seed dormancy in rice, viviparous germination, dry-heat tolerance and seed longevity were tested using 164 M/G RILs ($F_{17}$) derived from the cross between Milyang 23 (Indica/Japonica) and Gihobyeo (Japonica). At 40 days after heading, the viviparous germination rates of Milyang 23 and Gihobyeo were 0.0 and 7.0%, respectively. The averaged viviparous germination rate of 164 MIG RILs was 3.2%, and their range was from 0.0 to 50.9%. In dry-heat treatment at $90^{\circ}C$ for 24 h followed by the pre-drying at $40^{\circ}C$ for 2 days, Milyang 23 showed higher germinability (98.6%,2.7 days to $T_{50}$) than Gihobyeo (37.6%, 12.9 days to $T_{50}$), and the mean germination rate of 164 M/G RILs was 72.4%. In 54 months after harvest, the germinability in Milyang 23 and Gihobyeo were 90% and 0%, and 71 lines among 164 M/G RILs showed the germinability over 90%. The relationship between seed longevity and dry-heat tolerance was linearly correlated with high positive correlation coefficient. The relationships between seed longevity and viviparous germination, and viviparous germination and dry-heat tolerance were linearly correlated with high negative correlation coefficient. Milyang 23 had higher tolerance against high dry-heat, viviparous germination and long-term storage than Gihobyeo, and 164 M/G RILs showed the medium values of parents.

• Food Science and Preservation
• /
• v.23 no.4
• /
• pp.522-529
• /
• 2016

Clean rice is useful to save time and labor force against washing rice in the household. Nevertheless the quality characteristics of the rice were not established well since the quality characteristics of the rice depend on types of the processing system. The aims of the current study were to understand the quality characteristics of clean rice prepared from the dry, semi-dry, and wet types of processing systems, and to suggest the appropriate processing system for production of clean rice. Here, we found that the quality of clean rice was improved with the increasing whiteness of rice by the dry type, although the whiteness of rice should be below 42 to satisfy 16.0 NTU of the turbidity for higher head rice ratio. Also, both the semi-dry and wet type systems showed higher ratio of head rice than the dry type system at below 16.0 NTU of the turbidity. These results imply that the wet type is more suitable for the place where rice is consumed fast, and the semi-dry type is more proper for long term storage of rice.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.2
• /
• pp.89-94
• /
• 2017

Background: The purpose of improving the quality of oriental medicinal herbs is to contribute to the improvement of the income of farm. The present study investigated the effect of reasonable drying methods, different storage conditions and packageing materials on quality and stability of Scutellaria baicalensis Georgi and for developing GAP (good agricultural practice) guide book. Methods and Results: Three methods of drying Scutellaria baicalensis roots produced over two years were used to estimate loss rate owing to drying, storage, and packaging. The methods of drying were categorized into natural drying (36 - 60 h by sunshine), drying with heat dryer (2 - 10 h), or drying with gas bulk dryer (2 - 10 h). After cleaning, and initial drying for a few days under controlled temperature conditions, the second phase of drying was carried out at 35, 45 and $55^{\circ}C$. Changes in hunter color values and quality under the two studied storage treatments (at $20^{\circ}C$ indoors and at $4^{\circ}C$ in a refigerator) were evaluated. Storage period for 60, 120, and 180 days in three packaging materials, PE (polyethylene package), PP (polypropylene gunnysack), and WP (watertight packing paper) were studied. Conclusions: Initial cleaning, reasonable gas drying and hot air drying, and drying in an oven at 35 and $45^{\circ}C$ after cutting the roots resulted in the lowest loss rates in S. Baicalensis root. Hunter color valuse indicated that stroage of dry roots at room temperature was better than PP packaging, and that cold stroage was better than PE packaging for long-term stability.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.94-102
• /
• 1984

These experiments were intended to obtain basic information to develop an effective method of seed storage, using local varieties of seeds of 13 different crops in Korea. The germination ratio and velocity were investigated at one month intervals with seeds stored in six different temperatures($-20^{\circ}C$, $-7^{\circ}C$, $7^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, $50^{\circ}C$) for six months. The results obtained are summarized as follows. 1. Final germination ratio of the seeds of different crops were not influenced by the storage temperatures when dry seeds were used, but moist seeds were affected by storage temperatures. 2. The germination velocity and growth of the primary root of the seeds were remarkably influenced by storage temperatures. Viability of the seeds maintained in freezing temperatures ($-20^{\circ}C$, $-7^{\circ}C$) and in low temperature ($7^{\circ}C$) were higher than that of the seeds stored in high temperature ($30^{\circ}C$).

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.137-148
• /
• 2008

There have been many cases of using wetlands as an alternative in controlling stormwater, treating mining leachate, and agricultural discharge, and so on, recently. The reality is, however, that the wetlands are not properly applicable because of the lack of enough longterm data for wetlands due to the difficulty of long-term monitoring. Therefore, this study tries to analyze the storage of Upo, Mokpo, Sajipo, and Jjokjibeul in Topyeong watershed using SWAT(Soil and Water Assessment Tool) model, one of the long-term runoff hydrologic model, for the purpose of generating the long-term data and analyzing the hydrologic behavior of wetlands based on the generated data. Also, the changes in runoff at the outlet are analyzed after applying the simulation of constructing washland in Topyeong watershed and the storage in Upo is analyzed. The result shows that the runoff at the outlet of the watershed is decreased in rainy season from July to August and increased in dry season from December to February. In addition, the analysis of Upo storage concludes that Upo can be influenced by the construction of the washland. The duration curve of washland is then analyzed in order to evaluate the wetland's sustainability in terms of washland and it appears that the runoff of washland is simulated to be less than that of the existing wetland. Moreover, runoffs of some washlands are simulated to be less even in wet season. These results lead to the fact that there should be further hydrologic management for constructed washland. Then, the changes in loads (TN and TP) because of constructing washland are analyzed. The result shows that the loads are reduced because of the construction. Also, the changes in loads due to the construction of buffer strips are analyzed to compare the load reductions caused by a washland. Finally, REMM model, a riparian management model, is applied to overcome the hydrologic ambiguousness of SWAT model, and then, the SWAT model results are compared to those of REMM.