• 한국지반공학회논문집
• /
• 제28권5호
• /
• pp.13-25
• /
• 2012

그라운드 앵커공법은 현재 우리나라에서 가장 일반적으로 사용되는 사면보강공법들 중 하나이다. 앵커로 보강된 사면의 안정성을 장기간 확인하기 위해서는 그라운드 앵커의 긴장력을 측정하는 것이 매우 중요하다. 그러나 현재 현장에서 주로 사용되는 스트레인게이지 및 V/W타입의 로드 셀은 전자기파에 의한 노이즈 발생이 크고 습기 또는 수분의 영향으로 인해 측정값에 오차가 발생할 수 있으며 자기열화 등으로 장기간의 모니터링에 한계가 있다. 또한 앵커의 개별 텐던에 발생하는 미세한 변화를 정확히 감지할 수 없는 단점이 있어 이를 개선할 수 있는 방안으로 광섬유 센서를 이용하여 강연선의 변형률을 측정할 수 있는 광섬유 센서 내장형 텐던이 개발되었다. 이 광섬유 센서 내장형 텐던은 단기간의 앵커 장력 측정에 성공적으로 적용된 사례가 보고되었으나 장기간에 걸친 장력 변화를 측정하기 위해서는 온도에 의한 광섬유 센서의 변형률을 보상하여야 한다. 이 논문에서는 광섬유 센서 내장형 텐던을 이용하여 그라운드 앵커의 장력모니터링 시 지중온도 변화에 의한 영향을 보상하는 실용적인 방안에 대하여 기술하였다. 먼저 실내실험을 통하여 광섬유 센서 내장형 텐던의 온도반응계수(${\beta}^{\prime}$)를 $2.0{\times}10^{-5}/^{\circ}C$로 결정하고 실제 현장에 설치된 광섬유 센서를 이용하여 깊이별 지중온도 변화값을 측정하였다. 연구 대상지역(여수)의 기상청 지중온도 측정 결과 자료와의 비교를 통하여 결정된 온도반응계수(${\beta}^{\prime}$)를 이용한 광섬유 센서 내장형 텐던의 온도반응 성능을 검증하였다. 최종적으로 광섬유 센서 내장형 텐던을 이용하여 실제 사면에 설치된 인장형 앵커와 압축형 앵커의 계절별 긴장력을 모니터링하고 기상청 지중온도 측정자료와 온도반응계수를 이용하여 온도보상을 실시하여 기존 V/W타입의 로드 셀 측정 결과와 비교하였다. 제안된 광섬유 센서 내장형 텐던의 온도반응계수와 기상청 지중온도 측정결과를 이용한 앵커의 온도보상 방법에 의해 측정된 긴장력 모니터링 결과가 계절에 따른 지중온도 변화에 상관없이 로드 셀 결과와 일관성 있게 비교되어 제안된 온도보상 방법이 매우 실용적이며 합리적인 것으로 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.594-600
• /
• 2017

HVDC transmission systems can be configured in many ways to take into account cost, flexibility and operational requirements. [1] For long-distance transmission, HVDC systems may be less expensive and suffer lower electrical losses. For underwater power cables, HVDC avoids the heavy currents required to charge and discharge the cable capacitance of each cycle. For shorter distances, the higher cost of DC conversion equipment compared to an AC system may still be warranted, due to other benefits of direct current links. HVDC allows power transmission between unsynchronized AC transmission systems. Since the power flow through an HVDC link can be controlled independently of the phase angle between the source and the load, it can stabilize a network against disturbances due to rapid changes in power. HVDC also allows the transfer of power between grid systems running at different frequencies, such as 50 Hz and 60 Hz. This improves the stability and economy of each grid, by allowing the exchange of power between incompatible networks. This paper proposed to establish Korean HVDC technology through a cooperative agreement between KEPCO and LSIS in 2010. During the first stage (2012), a design of the ${\pm}80kV$ 60MW HVDC bipole system was created by both KEPCO and LSIS. The HVDC system was constructed and an operation test was completed in December 2012. During the second stage, the pole#2 system was fully replaced with components that LSIS had recently developed. LSIS also successfully completed the operation test. (2014.3)

• 수산해양기술연구
• /
• 제51권1호
• /
• pp.26-34
• /
• 2015

The angle of attack of a cambered otter board in a bottom trawl was estimated using a three-dimensional semi-analytic treatment of a towing cable (warp) system that was applied to the field experiments of a bottom trawl obtained by the Scanmar system. The equilibrium condition of the horizontal component and vertical component of forces was used to the three forces acting on the otter board in the horizontal plane. Those forces were the force on the warp at the bracket, hydrodynamic lift and drag forces on the otter board and the force on the hand rope attached just behind the otter board. Also the equilibrium of moment about the front edge of the otter board was used to find out the angle of attack of the cambered otter board. When the warp length was 120m and 180m long and the towing speed was between 1.23 and 1.90 m/s, the estimated angle of attack of the cambered otter board was ranged between $26.1^{\circ}$ and $29.6^{\circ}$, respectively, though the maximum lift force was at the angle of attack $22.6^{\circ}$. The angle of attack of the otter board was tended to increase weakly with the longer length of warp (180 m) at the same towing speed in the experiment.

• 전자공학회논문지SC
• /
• 제43권2호
• /
• pp.28-32
• /
• 2006

최근 고화질의 카메라가 장착된 휴대폰이 빈번하게 출시되고 있다. 휴대폰으로 고화질의 동영상 촬영은 가능하지만 그 동영상을 컴퓨터와 휴대폰 이외의 다른 영상장치에서는 무선 전송을 통해 재생시킬 방법이 없다. 따라서 본 논문에서는 휴대폰으로 촬영한 동영상을 고정식 TV뿐만 아니라 이동식 TV에서도 재생 가능케 하는 NTSC TV transmitter module을 설계 및 제작하고자 한다. NTSC transmitter module은 휴대폰에서 재생되는 동영상의 영상 및 음성 신호를 받아 NTSC TV의 CH4 방식으로 변조한 뒤, 이 신호를 무선으로 전송함으로써 TV에서도 휴대폰 동영상을 시청할 수 있다는 장점이 있다. 그러나 NTSC TV transmitter module은 안테나의 길이가 길고 잡음에 민감한 단점이 있다. 향후 TV 신호의 송수신 RF 분야의 지속적인 연구를 통해 안테나의 설계와 TV 신호의 왜곡 및 잡음 문제를 해결한다면 본 NTSC TV transmitter module은 휴대폰뿐만이 아닌 캠코더, DVD 플레이어 등의 많은 영상기기에 응용 가능할 것으로 예상된다.

• 한국의류학회지
• /
• 제32권12호
• /
• pp.1971-1980
• /
• 2008

본 연구의 목적은 전통적인 니트웨어에 대한 의미와 깊이를 파악하고 베르그송과 들뢰즈의 연속성 이론을 배경으로, 전통 니트의 대표적 패턴인 아란 모티프를 응용한 니트웨어의 디자인 전개와 개발을 해보는데 있다. 현대패션에서 보여지는 주름, 종이접기, 공기주입시스템, 방울이나 꼬임 등에서 느낄 수 있는 소통, 공간적 느낌, 해체적 유동성 등이 연속성 이론의 기본이 된다. 아란 니트는 역사적 전통성을 가지고 있으며, 아란 니트에서 보여지는 모티프는 이러한 연속성의 이론에 부합하고 있다. 본 연구에서는 아란 모티프에서 연속성의 대표적인 케이블 모티프와 연속성 이론을 바탕으로 5점의 핸드 니트웨어를 디자인, 제작하였다. 전통적인 아란 니트와 연속성이론에 기초한 작품 제작 결과를 통하여 새로운 의미를 전달할 수 있는 니트 디자인 개발이 지속적으로 이루어지길 바란다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.37-44
• /
• 2016

Optical fiber temperature sensing systems have incomparable advantages over traditional electrical-cable-based monitoring systems. However, the fiber optic interrogators and sensors have often been rejected as a temperature monitoring technology in real-world industrial applications because of high cost and over-specification. This study proposes a multiplexed fiber optic temperature monitoring sensor system using an economical Optical Time-Domain Reflectometer (OTDR) and Hard-Polymer-Clad Fiber (HPCF). HPCF is a special optical fiber in which a hard polymer cladding made of fluoroacrylate acts as a protective coating for an inner silica core. An OTDR is an optical loss measurement system that provides optical loss and event distance measurement in real time. A temperature sensor array with the five sensor nodes at 10-m interval was economically and quickly made by locally stripping HPCF clad through photo-thermal and photo-chemical processes using a continuous/pulse hybrid-mode laser. The exposed cores created backscattering signals in the OTDR attenuation trace. It was demonstrated that the backscattering peaks were independently sensitive to temperature variation. Since the 1.5-mm-long exposed core showed a 5-m-wide backscattering peak, the OTDR with a spatial resolution of 40 mm allows for making a sensor node at every 5 m for independent multiplexing. The performance of the sensor node included an operating range of up to $120^{\circ}C$, a resolution of $0.59^{\circ}C$, and a temperature sensitivity of $-0.00967dB/^{\circ}C$. Temperature monitoring errors in the environment tests stood at $0.76^{\circ}C$ and $0.36^{\circ}C$ under the temperature variation of the unstrapped fiber region and the vibration of the sensor node. The small sensitivities to the environment and the economic feasibility of the highly multiplexed HPCF temperature monitoring sensor system will be important advantages for use as system-integrated temperature sensors.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1383-1389
• /
• 2013

There were telecommunication noise and malfunctions of the electronic devices occurred over a wide area due to the high harmonic voltage and/or current levels of the Back-to-back converter in the DFIG wind power system even though the magnitude of all harmonics is within the international standards. The triangular carrier signals of the PWM used in the power converter system is related to the telecommunication noise because they are in the range of audible frequencies and amplified by a variety of the standing waves that were excited by harmonic voltage sources in the weak grid system such as a long distance distribution transmission lines. This paper describes the characteristics of the harmonics in the wind turbine-generator, numerical analysis and simulation of the harmonics resonance phenomena in the distribution lines as well as measuring induced voltage of the telecommunication lines in parallel with power lines in order to verify the root cause of the telecommunication noise. These noise problems can occur in a wind turbine power system with a non-linear converter at any time, as well as photovoltaic power system. So, the preliminary review of suitable filter devices and switching frequencies of the PWM have to be required by considering the stability of the controller at the design stage but as part of the measures the effect of the telecommunication cable shields was analyzed by comparing the measured data between multi-conductor with/without shields so as to attenuate the sources of the harmonics voltage induced into the telecommunication lines and to apply the most cost-effective measures in the field.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.45-51
• /
• 2008

This paper presents theoretical and experimental analysis on the characteristics of the power spectrum of electormagnetic waves radiating from the spark plug and their cables of a distributorless ignition system. The theoretical study was conducted applying the microwave transmission line theory and the antenna theory. The experimental works were carried out to measure the standing wave ratio(SWR) and the radiation power spectrum of this system. As a result, it has been found that a spark plug and its cable is working as a monopole antenna radiating elelctromagnetic waves. Because of its similar structure to a monopole antenna, the envelope of radiation power spectrum distribution has a bell shape which can be obtained from a monopole antenna operating as a series resonant circuit. The frequency characteristics from the SWR measurements show a similar frequency characteristics of power spectrum of the system studied. Also, it has been found that the density of the power spectrum of the system fitting a long time used spark plug is higher than that of fitting a new spark plug.

• Smart Structures and Systems
• /
• 제22권1호
• /
• pp.41-55
• /
• 2018

Damping ratio and frequency have influence on dynamic serviceability or instability such as vortex-induced vibration and displacement amplification due to earthquake and critical flutter velocity, and it is thus important to make determination of damping ratio and frequency accurate. As bridges are getting longer, small scale model test considering similitude law must be conducted to evaluate damping ratio and frequency. Analysis conditions modified by similitude law are applied to experimental test considering different scale ratios. Generally, Nyquist frequency condition based on natural frequency modified by similitude law has been used to determine sampling rate for different scale ratios, and total time length has been determined by users arbitrarily or by considering similitude law with respect to time for different scale ratios. However, Nyquist frequency condition is not suitable for multimode system with noisy signals. In addition, there is no specified criteria for determination of total time length. Those analysis conditions severely affect accuracy of damping ratio. The focus of this study is made on the determination of minimum analysis conditions for different scale ratios. Influence of signal to noise ratio is studied according to the level of noise level. Free initial value problem is proposed to resolve the condition that is difficult to know original initial value for free vibration. Ambient and free vibration tests were used to analyze the dynamic properties of a system using data collected from tests with a two degree-of-freedom section model and performed on full bridge 3D models of cable stayed bridges. The free decay is estimated with the stochastic subspace identification method that uses displacement data to measure damping ratios under noisy conditions, and the iterative least squares method that adopts low pass filtering and fourth order central differencing. Reasonable results were yielded in numerical and experimental tests.

• 한국항해항만학회지
• /
• 제31권6호
• /
• pp.485-490
• /
• 2007

부표시스템 침수체의 주요형상인 실린더에 원형 제어봉을 부착하여 2차원 단면의 유동특성에 대해서 수치해석을 수행하였다. 유속을 0.1m/s에서 0.5m/s로 변화시키면서 부표시스템 주위의 유동현상을 파악하고, 부표시스템의 효과적인 유동제어를 위해 실린더 (D=50mm)에 제어봉의 직경을 0.1D 에서 0.5D까지 부착하여 조류에 의한 압력분포를 조사하였다. 유동장내의 속도분포는 PIV 계측기법 중 2프레림 입자추적 법을 사용하여 수치해석의 정도를 높이고자 0.3m/s에서 비교 평가하였다. 실린더 주위의 압력분포는 0.2D의 제어봉을 부착하였을 경우, 유속의 변화에 관계없이 가장 양호한 경향을 보이는 것을 알 수 있었다.