• The Journal of the Korean bone and joint tumor society
• /
• v.5 no.1
• /
• pp.23-28
• /
• 1999

Between Sep. 1986 and Mar. 1996, twenty four patients with recurrent giant cell tumor of their long bones were treated and followed up for more than two years. We applied three different modalities for treatment: curettage with bone graft, curettage and packing with polymethylmethacrylate, wide excision with or without reconstruction. During the average 51.5 months after operation(24-97 months), two of three patients who underwent curettage with bone graft showed recurrence. Patients who underwent wide excision showed no recurrence. Five of fifteen patients who underwent curettage and packing with polymethylmethacrylate showed recurrence. Four of seven who showed recurrence were treated with reapplication of curettage and packing with polymethylmethacrylate. All four patients showed no recurrence, and two of them have been followed up for more than two years. We suggest that the curettage and packing with polymethylmethacrylate is an effective treatment modality of the recurrent giant cell tumor.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.175-182
• /
• 2005

Skull base tumors have been determined inoperable because it is difficult to accurately diagnose the extent of the involvement and to approach and excise the tumor safely. However, recently, the advent of sophisticated diagnostic tools such as computed tomography and magnetic resonance imaging as well as the craniofacial and neurosurgical advanced techniques enabled an accurate determination of operative plans and safe approach for tumor excision. Resection of these tumors may sometimes result in massive and complex extirpation defects that are not amenable to local tissue closure. The purpose of this study is to analyze experiences of skull base reconstruction and to evaluate long term survival rate and complications. All cranial base reconstructions performed from July 1993 to September 2000 at Department of Plastic and Reconstructive Surgery of the Seoul National University Hospital were observed. The medical records were reviewed and analysed to assess the location of defects, reconstruction method, existence of the dural repair, history of preoperative radiotherapy and chemotherapy, complications and causes of death of the expired patients. There were 12 cases in region II, 8 cases in region I and 1 case in region III according to the Irish classification of skull base. Cranioplasty was performed in 4 patients with a bone graft and microvascular free tissue transfer was selected in 17 patients to reconstruct the cranial base and/or mid-facial defects. Among them, 11 cases were reconstructed with a rectus abdominis musculocutaneous free flap, 2 with a latissimus dorsi muscluocutaneous free flap, 1 with a fibular osteocutaneous free flap, 2 with a scapular osteocutaneous free flap, and 1 with a forearm fasciocutaneous free flap, respectively. During over 3 years follow-up, 5 patients were expired and 8 lesions were relapsed. Infection(3 cases) and partial flap loss(2 cases) were the main complications and multiorgan failure(3 cases) by cancer metastasis and sepsis(2 cases) were causes of death. Statistically 4-years survival rate was 68%. A large complex defects were successfully reconstructed by one-stage operation and, the functional results were also satisfactory with acceptable survival rates.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.2
• /
• pp.116-120
• /
• 2012

The buccal fat pad is specialized fat tissue located anterior to the masseter muscle and deep to the buccinator muscle. Possessing a central body and four processes it provides separation allowing gliding motion between muscles, protects the neurovascular bundles from injuries, and maintains facial convexity. Because of its many advantageous functions, the use of the buccal fat pad during oral and maxillofacial procedures is promoted for the reconstruction of defects secondary to tumor resection, and those defects resulting from oroantral fistula caused by dento-alveolar surgery or trauma. We used the pedicled buccal fat pad in the reconstruction of intraoral defects such as oroantral fistula, maxillary posterior bone loss, or defects resulting from tumor resection. Epithelization of the fat tissue began 1 week after the surgery and demonstrated stable healing without complications over a long-term period. Thus, we highly recommend the use of this procedure.

• Archives of Reconstructive Microsurgery
• /
• v.15 no.1
• /
• pp.17-25
• /
• 2006

Twelve cases in eleven patients with segmental bone defects were treated with contralateral fibula free flap and ipsilateral island fibula flap in an antegrade, retrograde or bidirectional flow fashion. Five cases were managed with free flaps and seven were with ipsilateral fibula island transfer. Among seven cases, antegrade fashion was three, retrograde was three, and bidirectional was one. All patients were related with open tibial fractures and its sequelae except one who had open foot bone fracture. According to Gustilo's classification, ten patients were type IIIb and one was type IIIc. Basically, antegrade-flow flaps based on the peroneal vessels as in the conventional free flap were used for the proximal or middle one-third tibial defects. On the contrary, retrograde-flow flaps based on the communicating branch between the peroneal and posterior tibial vessels were used for the middle or distal one-third of the tibia. Bidirection-flow flap based on intact peroneal vessels were used for the middle portion of the tibia. The patients who have undergone ipsilateral fibula island flap had one of the following problems: a previously failed free flap, below-knee amputation of the opposite leg because of open tibial fracture, refusal to use the contralateral sound leg, or poor general condition to stand a lengthy operation. Six of the patients who have got ipsilateral fibula island flap also had an associated fibula fracture on the same leg, which was ultimately used as one of the osteotomy sites. The follow-up period was from 1 to 10 years. Two cases of free flap were failed: one patient had below-knee amputation and the other patient had ipsilateral fibula transfer. Other cases were successful and excellent hypertophy of the transferred fibula was achieved. Time to bone union ranged from 4 to 11 months. Time to full weight bearing was from 5 to 13 months after surgery. All of the transferred fibulas showed hypertrophy after weight bearing. In one case, stress fracture was developed during ambulation, which was healed conservatively. Nonunion occurred in two cases, which were treated with a long leg cast and cancellous bone graft, respectively. Length discrepancy of the legs was noted. The limb was shorter by an average 0.5 cm in three cases, longer by 1.1 cm in one case. In the case of island fibula transfer, limited arc of rotation was not a problem. Other disabling complications were not seen. We believe that these diverse modalities using a vascularized fibula will make us more comfortable to handle major bone defects.

• Archives of Plastic Surgery
• /
• v.48 no.6
• /
• pp.699-702
• /
• 2021

Extensive bone loss associated with severe vascular injury remains a challenge for lower extremity reconstruction. The fibular free flap has been utilized for many decades to reconstruct long-segment tibial defects. We present an unusual scenario of unilateral weight-bearing, wherein we salvaged the sole lower extremity by transfer of the fractured ipsilateral fibula and a bipedicled skin flap. A 38-year-old man sustained a severe crush injury in the right leg with loss of circulation. His left lower leg had a soft tissue defect measuring 20×15 cm with an exposed comminuted fracture and a 17-cm tibial defect, along with a segmental fracture of the fibula. Subsequently, we reconstructed the tibial defect by transferring a 17-cm-long section of the ipsilateral fibula. We covered the soft tissue defect with a bipedicled skin flap. The patient eventually began to ambulate independently after surgery.

• Journal of the Korean Arthroscopy Society
• /
• v.14 no.1
• /
• pp.20-24
• /
• 2010

Purpose: To evaluate the long term outcomes of the ACL reconstruction from the standpoint of osteoarthritis. Materials and Methods: We evaluated 31 patients who underwent ACL reconstruction from April 1986 to April 1999 and could be followed-up more than 7 years. Mean follow-up period was 10.1 years (7~22 years). In terms of the graft, 11 cases were treated with the ACL reconstruction using a autologous hamstring tendon graft, 20 cases were treated with using a autologous bone patellar tendon bone graft. For femoral tunnel, 11 cases were placed through transtibial tunnel, 20 cases were placed through anteromedial portal using mini-open arthrotomy. Functional and radiographic evaluation was performed. Results: Mean Lysholm score was $89.2{\pm}11.7$ points. Patients had KT-2000 side-to-side differences were $2.1{\pm}1.9\;mm$. IKDC ligament evaluation showed 38.7% type A, 48.3% type B, 6.5% type C and 6.5% type D. Femoral tunnel were placed at 11 or 1 o'clock position in transtibial technique and placed 10 to 10:30 or 2 to 2:30 o'clock position in technique using anteromedial portal. Radiographic analysis for degenerative arthritis revealed that in group using anteromedial tunnel, 50.0% were excellent, 25.0% were good. In group using transtibial tunnel 18.2% were excellent, 18.2% were good. Conclusion: More than 87.1% of cases, long term result of the ACL reconstruction showed good and excellent result in IKDC score. Especially, the group using tunnel through anteromedial portal showed good results for degenerative arthritis.

• The Journal of the Korean bone and joint tumor society
• /
• v.14 no.1
• /
• pp.51-55
• /
• 2008

As survival rate of patients in osteosarcoma improves, both patients and surgeons are increasingly interested in long-term functional outcome. For resection and reconstruction of tumors on either side of knee joint, if feasible, conservation of normal joint apparatus seems preferable method over use of tumor prosthesis. However, we should not trade off the sound surgical margin with expected functional gain. We report one case of osteosarcoma who was treated by wide, intercalary resection and reconstruction with autogenous pasteurized bone but, showed local recurrence at 44 months postoperatively.

• Archives of Plastic Surgery
• /
• v.34 no.4
• /
• pp.485-489
• /
• 2007

Purpose: The basic vascular anatomy and versatility of the anterolateral thigh flap was reported firstly by Song in 1984 and then by Zhang who introduced the reverse flow pattern of this flap. In this case, the authors reviewed various articles and their experiences with the distally based anterolateral thigh flap and applied it for coverage of bone-exposed wound occurred at the distal of the disarticulated knee stump. We consequently reported the reliability and resourcefulness of this flap in the difficult and limited situation. Methods: A 67-year-old-man who had suffered from arteriosclerotic obliterans inevitably underwent the disarticulation at knee joint due to clinical deterioration. He presented to our clinic with soft tissue necrosis and bone exposure at the stump. We debrided the wound and conducted the distally based anterolateral thigh island flap by transecting proximal portion of descending branch of the lateral circumflex femoral artery and the $14{\times}10cm$ sized flap was transferred to cover the defect. The pedicle measured 14 cm in length with pivot point 7 cm above the patella. Results: The postoperative course was mainly uneventful except early venous congestion for 4 days and subsequent partial skin loss. The wound was healed by secondary intension and no other sequelae had been observed during follow-up period of 12 months. Conclusion: Despite the presence of various reconstructive choices, the distally based anterolateral thigh island flap can be designed to repair soft tissue defects around the knee region, providing its reliable blood supply and long pedicle length, especially in the challenging cases.

• Journal of Periodontal and Implant Science
• /
• v.37 no.2
• /
• pp.277-286
• /
• 2007

The edentulous posterior maxilla generally provides a limited amount of bone height because of atrophy of the ridge and pneumatization of the maxillary sinus, Maxillary sinus augmentation is one of the surgical techniques for reconstruction of the severely resorbed posterior maxilla. The purpose of this study was to evaluate the survival rate of implants and the long-term changes of graft height after maxillary sinus augmentation by lateral window approach. From September 1996 to July 2004, maxillary sinus augmentation with mixed grafts of autograft, allograft, xenograft and alloplast were performed on 45 patients and 100 implants were placed. We evaluated the survival rate of implants and the changes of BL(bone length)/IL(implant length) according to time using panoramic radiographs. The survival rate of implants was 91.0% for follow-up period. The mean reduction of graft heights was 0.34mm(3.0%) for 6 months and 1.22mm(1O.66%) for 3 years after augmentation. The total mean BL/IL was $1.34{\pm}0.21$ during 5 year observation period after augmentation and decreased slightly over time. The result means that graft materials were stable above the implant apex. BL/ILs of 1stage procedure were significantly decreased at 1-2 year, 3-4 year after augmentation and no statistically significant changes were observed in those of 2 stage procedure. The graft materials of both procedures were stable above the implant apex. No statistically significant changes of BL/IL were observed in the grafts combined with low amount of autogenous bone or without autogenous bone. The graft materials of both groups were stable above the implant apex. The results indicated that the placement of dental implants with maxillary sinus augmentation showed predictable clinical results and the grafts combined with low amount of autogenous bone or without autogenous bone had long-term resistance to resorption in maxillary sinus.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.633-638
• /
• 2010

Purpose: Orbital bone is one of the most complex bones in the human body. When the patient has a fracture of the orbital bone, it is difficult for the surgeon to restore the fractured orbital bone to normal anatomic curvature because the orbital bone has complex curvature. We developed a rapid prototyping model based on a mirror image of the patient's 3D-CT (3 dimensional computed tomography) for accurate reduction of the fractured orbital wall. Methods: A total of 7 cases of large orbital wall fracture recieved absorbable plate prefabrication using rapid prototyping model during surgery and had the manufactured plate inserted in the fracture site. Results: There was no significant postoperative complication. One patient had persistent diplopia, but it was resolved completely after 5 weeks. Enophthalmos was improved in all patients. Conclusion: With long term follow-up, this new method of orbital wall reduction proved to be accurate, efficient and cost-effective, and we recommend this method for difficult large orbital wall fracture operations.