• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.708-715
• /
• 2010

In Strapdown Inertial Navigation System, alignment accuracy is the most important factor to determine the performance of navigation. However by an existing self-alignment method, it takes a long time to acquire the alignment accuracy that we want. So, to attain the desired alignment accuracy in as little as $\bigcirc$ minutes, we have developed the precise multi-position alignment method. In this paper, it is proposed a inertial measurement matching transfer alignment method among alignment methods to minimize the alignment error in a short time. It is based on a mixed velocity-DCM matching method be suitable to the operating environment of vertical launching system. The compensation methods to reduce misalign error, especially azimuth angle error incurred by measurement time-delay error and body flexure error are analyzed and evaluated with simulation. This simulation results are finally confirmed by experimentations using FMS(Flight Motion Simulator) in Lab and the integration test to follow the fire control mission.

• 한국광학회지
• /
• 제32권2호
• /
• pp.79-85
• /
• 2021

본 논문에서는 빔 확산각 최소화를 통해 장거리에서 측정이 가능하도록 한 ToF 레이저 거리센서 광학계 설계에 대한 연구를 진행하였다. 거리센서는 장거리 측정 시 거리가 멀어질수록 레이저 빔의 확산각으로 인해 물체 표면에 도달하는 빔의 광량이 급격히 저하되며, 이로 인해 센서에 수신되는 광량도 감소되어 측정이 되지 않거나 측정 오차가 발생하게 된다. 일반적으로 빔 확산각을 최소화하는 광학계로 실린더 렌즈가 사용된다. 그러나 실린더 렌즈를 이용한 광학계는 광학계 크기가 커지는 문제뿐만 아니라 조립 공차의 어려움으로 인해 성능이 저하된다는 문제점이 있어 최근 비구면 렌즈를 사용하는 추세가 증가하고 있다. 따라서 본 연구에서는 실린더 렌즈를 이용한 광학계와 비구면 렌즈를 이용한 광학계의 광효율과 조립공차를 비교 분석하고자 한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.27-30
• /
• 2007

In recent years, scientific community has found renewed interest in hypersonic flight research. These hypersonic vehicles undergo severe aero-thermal environments during their flight regimes. One of the most important topics of research in hypersonic aerodynamics is to find a reasonable way of calculating either the surface temperature or the heat flux to surface when its temperature is held fixed. This requires modeling of physical and chemical processes. Hyperbolic system of equations with stiff relaxation method are being identified in recent literature as a novel method of predicting long time behavior of systems such as gas at high temperatures. In present work, Energy Relaxation Method (ERM) has been considered to simulate the real gas flow over a 2-D cylinder. Present heat flux results over the cylinder compared well with the experiment. Thus, real gas effects in hypersonic flows can be modeled through energy relaxation method.

• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.118-126
• /
• 2016

North Korea has continued developing ballistic missiles with various ranges. Even through the recent launch long-range missiles, it can be inferred that North Korea's Missile technology has reached a level where it can even threaten the US. moreover, through the three times nuclear tests, North Korea is known to have succeeded at gaining 10~20KT of explosive power as well as the minimization and lightening of nuclear warhead. Considering the short length of war zone in Korean peninsula and the possibility of nuclear equipment, if be the most severe threat across the whole peninsula. Since the midcourse phase flight takes the longest time, ROK should establish the ability to intercept at this middle phase. From this perspective, this paper describes mission effect of a sea-based BMD system through empirical threat and flight characteristic analysis using MIT model that was not suggested in original research.

• 항공우주의학회지
• /
• 제30권3호
• /
• pp.91-94
• /
• 2020

The coronavirus infectious disease-19 (COVID-19) pandemic has had a profound impact on the aviation industry. In order to overcome this crisis, airlines have made their efforts in various fields. Therefore, we tried to summarize these efforts of airlines. It is also essential to keep aircraft that have been in landing for a long time in optimal condition. In this paper, we tried to find out about efforts to maintain landing aircraft and maintenance of personnel. Through such constant care, airlines will be able to quickly respond to increasing aviation demand when the infectious disease situation is stabilized in the future. Finally, airlines and passengers must make several efforts to ensure that passengers are free from COVID-19 while traveling by air. These include general precautions to prevent infection, separation of airline personnel and passengers, changes in seat assignments and in-flight services, periodic aircraft disinfection, and prevention of in-flight infections.

• Journal of Electrochemical Science and Technology
• /
• 제7권1호
• /
• pp.41-51
• /
• 2016

In the stratosphere, the air is stable and a photovoltaic (PV) system can produce more solar energy compared to in the atmosphere. If unmanned aerial vehicles (UAVs) fly in the stratosphere, the flight stability and efficiency of the mission are improved. On the other hand, the weakened lift force of the UAV due to the rarefied atmosphere can require more power for lift according to the weight and/or wing area of the UAV. To solve this problem, it is necessary to minimize the weight of the aircraft and improve the performance of the power system. A regenerative fuel cell (RFC) consisting of a fuel cell (FC) and water electrolysis (WE) combined PV power system has been investigated as a good alterative because of its higher specific energy. The WE system produces hydrogen and oxygen, providing extra energy beyond the energy generated by the PV system in the daytime, and then saves the gases in tanks. The FC system supplies the required power to the UAV at night, so the additional fuel supply to the UAV is not needed anymore. The specific energy of RFC systems is higher than that of Li-ion battery systems, so they have less weight than batteries that supply the same energy to the UAV. In this paper, for a stratospheric long-endurance hybrid UAV based on an RFC system, three major design factors (UAV weight, wing area and performance of WE) affecting the ability of long-term flight were determined and a simulation-based feasibility study was performed. The effects of the three design factors were analyzed as the flight time increased, and acceptable values of the factors for long endurance were found. As a result, the long-endurance of the target UAV was possible when the values were under 350 kg, above 150 m² and under 80 kWh/kg H₂.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.216-217
• /
• 2008

In recent years, scientific community has found renewed interest in hypersonic flight research. These hypersonic vehicles undergo severe aero-thermal environment during their flight regimes. During reentry and hypersonic flight of these vehicles through atmosphere real gas effects come into play. The analysis of such hypersonic flows is critical for proper aero-thermal design of these vehicles. The numerical simulation of hypersonic real gas flows is a very challenging task. The present work emphasizes numerical simulation of hypersonic flows with thermal non-equilibrium. Hyperbolic system of equations with stiff relaxation method are identified in recent literature as a novel method of predicting long time behaviour of systems such as gas at high temperature. In present work, Energy Relaxation Method (ERM) has been considered to simulate the real gas flows. Navier-Stokes equations A numerical scheme Advection Upstream Splitting Method (AUSM) has been selected. Navier-Stokes solver along with relaxation method has been used for the simulation of real flow over a circular cylinder. Pressure distribution and heat flux over the surface of cylinder has been compared with experiment results of Hannemann. Present heat flux results over the cylinder compared well with experiment. Thus, real gas effects in hypersonic flows can be modeled through energy relaxation method.

• 한국항공우주학회지
• /
• 제39권10호
• /
• pp.927-934
• /
• 2011

상승 비행에 의해 위치에너지를 축적하는 태양동력 장기체공 무인기에 대하여 설계 인자 분석을 수행하였다. 위치에너지 축적을 위한 비행과 관련된 인자인 최저 및 최고 수평 비행 고도, 활강 및 상승 각도, 설계점 속도 및 고도, 활강 및 상승 시작 시각을 분석 대상으로 하였다. 태양동력 무인기 구성품의 중량 모델을 이용하여 항공기 크기 및 중량을 결정하고 비행 중 생산 및 소모하는 에너지를 계산함으로써 임무 수행에 필요한 배터리 용량을 결정하였다. 각 설계 인자값과 무인기 중량의 관계를 연구하였다. 최고 수평 비행 고도, 활강 및 상승 각도, 설계점 속도 및 고도, 활강 및 상승 시작 시각에는 설계가 가능하도록하는 범위가 존재하며 이 범위 내에서 총 중량을 최소화하는 최적값이 존재하였다.

• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.829-835
• /
• 2016

Electro-Mechanical Actuator installed on the aircraft plays a key role in an aircraft's flight control through flight control computer. Reliable prediction of the actuator is important for the aircraft. To estimate the lifetime of a product, it is necessary to test full target life. However, it is very difficult to perform it due to the long life time of actuator but short period of development time with increasing cost. Therefore, accelerated life test has been used to reduce the test time for various reasons such as reducing product's development cycle and cost. In this paper, to predict the lifetime of the actuator, we analyzed the flight profile of aircraft and adapted the method of accelerated life test in order to accelerate failure modes that might occur under user conditions. We also set up an endurance test equipment for validating the demanded lifetime of an actuator and performed accelerated life test.

• 한국산학기술학회논문지
• /
• 제22권5호
• /
• pp.15-21
• /
• 2021

전기동력을 기반으로 하는 전기추진비행기는 화석연료 사용에 따른 CO2 발생을 줄여서 지구온난화에 대응할 수 있고 에너지의 효율적 사용을 통해서 장기적으로 비행기의 운용비용을 줄일 수 있다. 이런 이유로, 미국과 유럽연합 등 선진 항공국가에서는 미래의 완전한 전기비행기 구현을 위한 혁신적 기술개발을 선도적으로 진행하고 있다. 현재, 국내에서는 기존 2인승 엔진 비행기를 전기추진비행기로 개조하는 연구개발이 진행 중에 있다. 개조대상 비행기는 KLA-100으로써 엔진 장착공간과 부조종사 공간을 활용하여 배터리 팩을 설치하고, 30분의 비행시험을 목표로 하고 있다. 해당 목표를 달성하기 위해서는 배터리 성능이 보장되어야 하는데, 개조 비행기에는 비출력 150Wh/kg, 중량 200kg 그리고 C-rate 3~4인 리튬-이온(Li-ion) 배터리가 설치된다. 본 논문에서는 설계된 배터리 팩이 장착된 전기추진비행기의 비행 가능성을 사전에 점검하고자 한다. 이를 위해 30분 비행 프로파일을 시동 및 활주단계, 이륙단계, 상승단계, 순항단계, 하강단계, 착륙 및 활주단계로 구분하고, 각 단계에서 요구되는 배터리 용량을 계산하여 최종 목표로 하고 있는 30분 비행 가능 여부를 평가하였다. 또한, 비행속도에 따른 비행 가능시간과 항속거리를 분석하여 전기추진비행기용 배터리 팩의 비행성능을 파악하였다.