• 근관절건강학회지
• /
• 제27권2호
• /
• pp.71-80
• /
• 2020

Purpose: This thesis study aimed to examine the effects of elastic-band resistance exercise on physical fitness, activities of daily living (ADLs), falls efficacy, and quality of life among older women receiving home nursing care under long-term care insurance. Methods: We used an equivalent control group pre-test/post-test design. We assigned older women at the nursing care center J to the experimental group (n=21), and older adult women at the nursing care center H to the control group (n=21). The experimental group engaged in an elastic band resistance exercise twice per week from February 18 to April 12, 2019. Results: There were significant differences in the Short Physical Performance Battery score (t=4.15 p<.001), left grip strength (t=0.57, p<.569), right grip strength (t=1.38 p<.177), flexibility test scores (t=2.34, p<.024), ADLs (t=6.86, p<.001), falls efficacy (t=5.16, p<.001), and quality of life (t=3.87, p<.001). Grip strength was increased slightly in the experimental group, but the increase was not significant. Conclusion: Elastic band resistance exercise is an effective nursing intervention to enhance physical fitness, flexibility, ADLs, falls efficacy, and quality of life among older women receiving home nursing care under long term care insurance.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권4호
• /
• pp.136-143
• /
• 2016

염해에 의한 철근콘크리트 구조물의 내구수명을 평가하는 방법에는 여러 가지가 있지만, 가장 확실한 방법은 염해환경에 노출된 시편에 대한 철근 부식시험을 시행하는 것이다. 그러나 이러한 방법은 장기간이 소요된다는 단점이 있으며 이를 보완한 촉진부식시험 결과는 장기시험과의 상관성이 규명되지 않아 적용에 한계가 따른다. 따라서 본 연구에서는 부식촉진시험과 장기폭로시험간의 상관성을 분석하는 것을 연구의 목표로 한다. 부식속도가 가장 빠른 간만대 환경을 모사한 최적 건습반복시험방법을 찾고 해양환경폭로시험장의 간만대에 장기간 노출된 시편의 철근부식모니터링 시험결과와의 비교를 통해 촉진부식시험과 장기폭로시험간의 상관계수를 도출하였다. 또한 재료의 배합별 특성을 파악하기 위해 물,결합재비 60%를 기준으로 플라이애시를 20% 치환한 배합과 고로슬래그 미분말을 30% 치환한 배합을 비교하였으며, 물-결합재비가 35%인 고강도 배합에 대해서도 시험을 실시하였다. 반전지전위법에 의한 부식 모니터링 결과 일정기간의 건조와 습윤의 반복 조건보다는 염수를 시편 상부에 침지시켜 염수 및 산소의 공급이 계속되는 염수 ponding 시험법이 24~36% 정도 부식을 촉진시키는 것으로 나타났다. 각 배합별로는 모든 시험법에서 OPC60, FA, BS, OPC35 순으로 부식이 발생하였다. 간만대의 장기폭로시험과의 상관성 분석 결과 건습반복 부식촉진시험의 경우 4.23~5.52의 상관계수를 가지고 있었으며, 염수 ponding 시험법의 경우 6.54~7.82의 상관계수를 나타내었다.

• 한방재활의학과학회지
• /
• 제19권1호
• /
• pp.213-224
• /
• 2009

Objectives : The purpose of this study was to fine out life nurturing level according to health practice. Methods : The subjects for this study were 2114 industrial workers. Data were collected by using constructed questionnaires and analyzed by t-test, one-way ANOVA. Results : 1. There were statistically significant differences in life nurturing level according to general characteristics-age, marital status, job tenures, income. 2. The higher life nurturing level was showed in high aged, married, long job tenures and high income group. 3. There were statistically significant differences in life nurturing level according to health practice, especially non-smoking, non-drinking, regular exercise and sufficient sleeping group were higher in life nurturing level. Conclusions : This study suggests that health practice is related to life nurturing level and that the introduction of desirable health practice can contribute to life nurturing level.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1069-1076
• /
• 2002

The high temperature creep behavior of heat machine systems such as aircraft engines, boilers and turbines in power plants and nuclear reactor components have been considered as an important and needful fact. There are considerable research results available for the design of high temperature tube materials in power plants. However, few studies on the Initial Strain Method (ISM) capable of securing repair, maintenance, cost loss and life loss have been made. In this method, 3 long time prediction Of high temperature creep characteristics can be dramatically induced through a short time experiment. The purpose of present study is to investigate the high temperature creep lift of Udimet 720, SCM 440-STD61 and 1Cr-0.5Mo steel using the ISM. The creep test was performed at 40$0^{\circ}C$ to $700^{\circ}C$ under a pure loading. In the prediction of creep life for each materials, the equation of ISM was superior of Larson-Miller Parameter(LMP). Especially, the long time prediction of creep life was identified to improve the reliability.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.119-122
• /
• 2000

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage transmission lines. Their advantages are light weight, vandalism resistance and hydrophobicity. Polymer insulators are a relatively new technology, but their expected life is still unknown. Therefore these estimating technique are very important. Their life time is related to weathering and operating condition. Multi-aging test is requested because aging factor is occurred by multi-aging than unique aging. The aging test about polymer insulators have mainly carried out by IEC 61109. This paper presents multi-stress chamber experiments and tracking wheel test to examine the tracking and erosion performance of polymer insulator for transmission. Multi-stress testing is able to demonstrate deficiencies of polymer insulator materials and designs, including the nature of interfaces in insulation design. We have investigated IEC 61109 Annex C (5000h aging test) and CEA tracking wheel test as test methods of artificial accelerated aging. The aging degree of polymer insulator is estimated by leakage current, measurement of hydrophobicity degree, damage conditions of insulator surface, withstand voltage test etc.

• Tribology and Lubricants
• /
• 제25권3호
• /
• pp.171-175
• /
• 2009

One of the critical issues associated with the 40mm long hollow cylinder's development and maintenance is the prediction of cylinder erosion. The actual firing test is the most accurate method to measure the cylinder erosion rate. But it costs a great deal and requires a long measurement time. Hence many empirical methods have been proposed to predict the erosion rate and life span of long hollow cylinders. An EFC formula is calculated. An approximate erosion formula for the ammunition type A is derived to interpolate 16 observation values up to 4,000 rounds. A new erosion equation and muzzle velocity formula are also suggested. Several numerical results are presented.

• Korean Chemical Engineering Research
• /
• 제48권6호
• /
• pp.695-699
• /
• 2010

추진제 KM10은 니트로셀룰로오스를 주원료로 제조된 단기추진제로서 장기저장 시자연분해현상을 일으키는 것으로 알려져 있다. 따라서 본 연구에서는 고온가속노화시험과 저장분석시험을 이용하여 추진제의 저장수명을 추정하였다. 고온가속 노화시험을 이용한 저장수명추정은 Arrhenius 식과 Berthelot 식을 사용하였으며, 저장분석시험을 이용한 저장수명 예측은 1차 회귀직선식을 이용하였다. 본 연구 결과에 따르면 고온가속 노화시험의 Arrhenius 식과 Berthelot식을 이용하여 추정한 추진제 KM10의 저장수명은 43.72년, 16.53년으로 큰 차이를 보였으며, 저장분석시험으로 이용한 저장수명은 42.94년으로 나타났다. 이것을 E. R. Bixon의 연구결과와 비교할 때 Arrhenius 식을 이용하여 추정한 값이 타당한 것으로 판단되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.277-282
• /
• 2011

Bogie frame is typical safety part of railway vehicle. Total serviceable life of bogie frame will be evaluated by Cumulative Damage Approach Method that is defined by dynamic strain measurement during revenue service under the actual track conditions. As a result of the standardization process developed in British Standard Institution, BS 7608 defines for fatigue design and test method of steel structure by fatigue test results over the long period. This paper evaluates the total serviceable life applying BS 7608 for the bogie frame of Electric Multiple Unit to verify structural safety of the bogie frame.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권3호
• /
• pp.267-279
• /
• 2011

LEDs have been used extensively in the mobile device, automobile, and general lighting because they are semi-permanent, long life, less power consumption, reliable and environmentally friendly. In this paper, the accelerated degradation test(ADT) for a general lighting 4W LED Lamp using external converter is considered. The conditions of ADT are high temperature and high humidity. We show that its life time is log-normally distributed with same parameters under both a normal condition and an accelerated condition, and also derive an accelerated factor.

• 한국태양에너지학회 논문집
• /
• 제35권3호
• /
• pp.81-91
• /
• 2015

LED has received intensive research attention due to its long life, high efficacy, fast response and wide colour availability, and has secured extensive application areas. However, LED chips within the modules convert only fraction of electric energy into light, and majority of supplied energy needs to be dissipated as heat, which challenges in the performance and life of the LED modules. IEC 62717 specifies the performance requirements for LED modules together with the test methods and conditions. The present study examined the influence of different design parameters on performance temperature through series of experiments and numerical simulations. The economic means to change the module performance temperature during the measurement of mandatory markings were suggested based on predicted cooling performances.