Browse > Article
http://dx.doi.org/10.3795/KSME-A.2002.26.6.1069

Evaluation on the Creep Life Prediction Using Initial Strain Method  

Kong, Yu-Sik (동의대학교 산업기술개발연구소)
Lim, Man-Bae (동의대학교 기계시스템공학부)
Lee, Sang-Pill (동의대학교 기계시스템공학부)
Yoon, Han-Ki (동의대학교 기계시스템공학부)
Oh, Sae-Kyoo (부경대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.26, no.6, 2002 , pp. 1069-1076 More about this Journal
Abstract
The high temperature creep behavior of heat machine systems such as aircraft engines, boilers and turbines in power plants and nuclear reactor components have been considered as an important and needful fact. There are considerable research results available for the design of high temperature tube materials in power plants. However, few studies on the Initial Strain Method (ISM) capable of securing repair, maintenance, cost loss and life loss have been made. In this method, 3 long time prediction Of high temperature creep characteristics can be dramatically induced through a short time experiment. The purpose of present study is to investigate the high temperature creep lift of Udimet 720, SCM 440-STD61 and 1Cr-0.5Mo steel using the ISM. The creep test was performed at 40$0^{\circ}C$ to $700^{\circ}C$ under a pure loading. In the prediction of creep life for each materials, the equation of ISM was superior of Larson-Miller Parameter(LMP). Especially, the long time prediction of creep life was identified to improve the reliability.
Keywords
Creep Life Prediction; Initial Strain Method; Larson-Miller Parameter (LMP); Friction Welded Joints; Superalloy;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Cane, B. J. and Aplin, P. F., 1993, 'Creep Life Assessment Methods,' Proceeding of the 1993 Pressure Vessels and Piping Conference, pp. 25-29
2 오세규, 정순억, 오정환, 1993, '내열강의 마찰용접 최적화와 장기간 고온 크리프 수명의 초기 실시간 예측법(2)-SCM4와 SUS304 및 그 용접재의 고응력 고온 크리프 특성과 초기 변형률의 상관성,' 대한기계학회 논문집, 제17권, 제3호, pp. 520-526
3 오세규, 김선진, 김순억, 오정환, 1993, '내열강의 마찰용접 최적화와 장기간 고온 크리프 수명의 초기 실시간 예측법(3)-고온 크리프 수명의 초기 실시간 예측법,' 대한기계학회 논문집, 제17권, 제4호, pp. 746-754
4 정민화, 이상국, 윤병식, 오세규, 송정근, 1997, '화력발전소 고온배관재료의 크리프 손상 특성 평가(1)-1Cr0.5Mo강의 크리프특성과 LMP에 의한 크리프 수명의 예측,' 대한기계학회 춘계학술대회 논문집 A, pp. 63-67
5 공유식, 오세규, 박노광, 1999, '항공기용 가스터빈 재료의 열처리 조건에 따른 크리프 특성,' 한국해양공학회지, 제13권, 제4호, pp. 112-117   과학기술학회마을
6 Oh, S. K., Kim, S. J. and Jeon, T. E., 1996, 'Development of Long-Time Creep Safety Life Prediction of Steam Turbine Rotor Steel and AE Evaluation(1st Report)-Possibility of Creep Prediction by Initial Strain Method,' Proc. of 6th International Offshore and Polar Eng. Conf., ISOPE, Los Angels, pp. 275 -279
7 박일동, 오세규, 김지수, 1999, '열간 금형펀치 제작을 위한 이종재 마찰용접과 고온 크리프 실시간 예측 및 AE에 의한 품질평가(I)-미찰용접과 AE,' 한국해양공학회지, 제13권, 제3호, pp. 77-82   과학기술학회마을
8 Larson, F. R. and Miller, J., 1952, 'A Time Temperature Relationship for Rupture and Creep Stresses,' Transaction of the ASME, pp. 765 -775
9 NRIM, 1990, 'Data Sheets on the Elevated-Temperature Properties of Normalized and Tempered 1Cr-0.5Mo Steel Plates for Pressure Vessels,' National Research Institute for Metals, Tokyo, Japan, NRIM Creep Data Sheet, No. 35A
10 정민화, 이상국, 허광범, 오세규, 이원석, 1997, '발전소 고온배관재료의 크리프 손상 특성 평가(2)-ISM에 의한 1Cr0.5Mo강의 크리프 수명 예측,' 대한기계학회 춘계학술대회 논문집 A, pp. 80-85