• Advances in pediatric surgery
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2001

The aims of this study were to evaluate the prognostic predictabilities of the risk classifications (Waterston, Montreal, and Spitz), preoperative treatment of pneumonia and the length of esophageal gap in esophageal atresia. Twenty-five cases of esophageal atresia were reviewed retrospectively. The data was analyzed with Likelihood ratio test for trend and Fisher's exact test. Survival rates were 100.0 % in group A and B, and 60.0 % in group C according to Waters ton classification (p=0.027). By Montreal classification, 95.7 % in group I and 50.0 % in group II (p=0.086). By Spitz classification, 95.5 % in group I and 66.7% in group II (p=0.159). The survival rate was 85.7 % in the patients with pneumonia preoperatively treated and 94.4% in the patients without pneumonia. The difference was not significant (p=0.490). Survival rate in the patients with long gap (${\geq}$3cm) was 50.0 % and 100.0 % in patients with short gap (<3cm) with significant difference (p=0.020). The Waterston classification could be modified into two groups because the prognosis of both group A and B were the same. Preoperative pneumonia does not seem to be a risk factor. The length of the esophageal gap showed prognostic value.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.5
• /
• pp.29-38
• /
• 2006

Geographic Information System has extended to higher assessment of water resources. GIS linking with hydrological model becomes a trend in water resource assessment modeling. One of the most popular models is SWAT2000 which have effectiveness in multi-purpose processes for predicting the impact of land management practices on water, sediments and chemicals yields in large complex watershed with varying soils, land uses, and management conditions over long period of time. In this study, SWAT2000 model was applied to Gap stream watershed in Daejeon city where TMDL (Total Maximum Daily Load) Regulation would be implanted. The Gap Stream watershed was partitioned into 8 subbasins, however, only 3 out of 8 subbaisns were observed for having practical gauged data on the basis of streamflow from the year of 2002 to 2005. Gauged streamflow data of Indong, Boksu and Hoeduck stations were used for calibration and validation of the SWAT Streamflow simulation. Estimation Efficiency Analysis (COE), Regression Analysis ($R^{2}$), Relative Error (R.E.) were used for comparing observed streamflow data of the 3 subbasins on the daily and monthly basis with estimated streamflow data in order to fix optimized parameters for the best fitted results. COE value for the daily and monthly streamflow was ranged from 0.45 to 0.96. $R^{2}$ values for daily and monthly streamflow ranged from 0.51 to 0.97. R.E. values for total streamflow volume ranged from 3 % to 22.5 %. The accuracy of the model results shows that the SWAT2000 model can be applicable to Korean watersheds like the Gap Stream watershed that needs to be partitioned into a number of subbasins for TMDL regulation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.5
• /
• pp.973-985
• /
• 2021

South Korea has been guaranteed the efficiency and the convenience of administrative work based on long-term experience and well-established ICT infrastructure. Vice versa, South Korea is always exposed to various scale cyber-attacks. It is an important element of national competitiveness to secure cybersecurity resilience and response in the public sector. For this, the well-trained cybersecurity professionals' retention and support for their capacity development through retraining are critical. As the Special Act on Balanced National Development, most public agencies moved to provincial areas, but the provincial areas are not ready for this, thus the workforce can't get enough retaining courses. We study to analyze whether there is a gap in cybersecurity educational opportunities or needs in the public sector depending on regions, institution type, and personal traits. This paper aims to suggest solutions for the cybersecurity education gap in the public sector based on the empirical analysis results.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.498-503
• /
• 2017

Objective : The purpose of the present study was to compare inter-fragmentary compression pressures after fixation of a simulated type II odontoid fracture with the headless compression Herbert screw and a half threaded cannulated lag screw. Methods : We compared inter-fragmentary compression pressures between 40- and 45-mm long 4.5-mm Herbert screws (n=8 and n=9, respectively) and 40- and 45-mm long 4.0-mm cannulated lag screws (n=7 and n=10, respectively) after insertion into rigid polyurethane foam test blocks (Sawbones, Vashon, WA, USA). A washer load cell was placed between the two segments of test blocks to measure the compression force. Because the total length of each foam block was 42 mm, the 40-mm screws were embedded in the cancellous foam, while the 45-mm screws penetrated the denser cortical foam at the bottom. This enabled us to compare inter-fragmentary compression pressures as they are affected by the penetration of the apical dens tip by the screws. Results : The mean compression pressures of the 40- and 45-mm long cannulated lag screws were $50.48{\pm}1.20N$ and $53.88{\pm}1.02N$, respectively, which was not statistically significant (p=0.0551). The mean compression pressures of the 40-mm long Herbert screw was $52.82{\pm}2.17N$, and was not statistically significant compared with the 40-mm long cannulated lag screw (p=0.3679). However, 45-mm Herbert screw had significantly higher mean compression pressure ($60.68{\pm}2.03N$) than both the 45-mm cannulated lag screw and the 40-mm Herbert screw (p=0.0049 and p=0.0246, respectively). Conclusion : Our results showed that inter-fragmentary compression pressures of the Herbert screw were significantly increased when the screw tip penetrated the opposite dens cortical foam. This can support the generally recommended surgical technique that, in order to facilitate maximal reduction of the fracture gap using anterior odontoid screws, it is essential to penetrate the apical dens tip with the screw.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2008.03a
• /
• pp.122-122
• /
• 2008

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.184-187
• /
• 1995

This paper proposes an algorithm for machine recognition of phonemes in continuous speech. The proposed algorithm is static strategy neural network. The algorithm uses, at the stage of training neuron, features such as PARCOR coefficient and auditory-like perceptual liner prediction . These features are extracted from speech samples selected by a sliding 25.6msec windows with s sliding gap being 3 msec long, then interleaved and summed up to 7 sets of parmeters covering 171 msec worth of speech for use of neural inputs. Perfomances are compared when either PARCOR or auditory-like PLP is included in the feture set.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.339-342
• /
• 2006

The power outputs of renewable energy such as wind turbines and solar energy powers depend on natural sources. Accordingly, the power outputs of renewable energy is different from capacity rate at the time of peak load. Because of this gap, long term electricity power plan can have over-estimated reserve margin. So, this paper suggests the chronological approach to calculate the reliability assessment of renewable energy.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.410-412
• /
• 2011

Magnetic cables that can deliver high frequency AC electric power safely for flammable or sensitive workplaces preventing from arcs and electric shocks are firstly proposed in this paper. To deliver the power for a long distance, several new magnetic cable structures which drastically reduce the parallel leakage flux by appropriate magnetic shield between the magnetic cables are suggested; hence, the output power can be improved more than ten times. The proposed magnetic cables are fully analyzed and verified by simulations and experiments with good agreement. The output power and efficiency for a prototype magnetic cable of 1.5m long and 1 cm gap between parallel cores were measured as 154W and 67 %, where the source current and frequency were 10 A and 20 kHz, respectively.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2013

This paper presents a uniform analytical model by energy method and Fourier series expansion to analyze detent force in uneven magnetic field for permanent magnet linear synchronous motor (PMLSM). The model reveals that detent force in long-primary type is mainly influenced by non-ideal distribution of permanent magnet magnetic motive force, while nounified air-gap permeance makes a great impact on detent force of short-primary type. Hence, magnetic field similarity of motor design techniques referring rotary counterpart are adopted. For long-primary type novel method of splitting edge magnets is proposed to reduce end effects force, and optimal widths of edge tooth in short-primary type also verify the effectiveness of magnetic field similarity. The experimental results validate finite element analysis results.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.91-91
• /
• 1993

The vast number of compounds which have been introduced into our environment in recent years is far beyond our capacity to assess for carcinogenicity using expensive, life-time carcinogenicity studies in rodents. Several in vitro short term assays which are very rapid and inexpensive have therefore been applied as mass screening methods. However, increasing evidence has indicated that mutagenicity results do not always correlate with long-term carcinogenicity. Therefore, the existence of discrepancies dictates the necessity of suitable in vivo rapid assay systems which could bridge the gap between mutagenicity and conventional long-term testing.