• Journal of Korean Society of Transportation
• /
• v.34 no.1
• /
• pp.68-80
• /
• 2016

Interest in freeway truck traffic has increased largely due to greater safety concerns regarding truck-related crashes. The negative interactions between slow-moving trucks and other vehicles are a primary cause of hazardous conditions, which lead to crashes with larger speed variations. To improve operational efficiency and safety, providing a climbing lane that separates slow-moving trucks from higher performance vehicles is frequently considered when upgrading geometrics. This study developed an operations strategy for freeway climbing lanes based on traffic conditions in real time. To consider traffic safety when designing a dynamic strategy to determine whether a climbing lane is closed or open, various factors, including the level of service (LOS) and the percentage of trucks, are investigated through microscopic simulations. A microscopic traffic simulator, VISSIM, was used to simulate freeway traffic streams and collect vehicle-maneuvering data. Additionally, an external application program interface, VISSIM's COM-interface, was used to implement the proposed climbing lane operations strategies. Surrogate safety measures (SSM), including the frequency of rear-end conflicts and, were used to quantitatively evaluate the traffic safety using an analysis of individual vehicle trajectories obtained from VISSIM simulations with various operations scenarios. It is expected that the proposed algorithm can be the backbone for operating the climbing lane in real time for safer traffic management.

• Journal of Korean Society of Transportation
• /
• v.36 no.3
• /
• pp.169-183
• /
• 2018

Aggressive driving leads to a greater crash potential because it threatens surrounding vehicles. This study conducted traffic simulation experiments using driving behavior data obtained from multi-agent driving simulations. VISSIM traffic simulator and surrogate safety assessment model (SSAM) were used to identify the impacts of aggressive driving on traffic stream in terms of safety and operational efficiency. Market penetration rates (MPR) of aggressive driving vehicle, coupled with various traffic conditions, were taken into consideration in analyzing the impacts. As expected, it was identified that aggressive driving vehicles tended to deteriorate the traffic safety performance. From the perspective of operational efficiency, interesting results were observable. Under level of service (LOS) A, B, and C, it was observed that the average travel speed increased with greater MPRs. Conversely, the average travel speed decreased with under LOS D and E conditions. The outcome of this study would be effectively used for developing safety-related policies for reducing aggressive driving behavior.

• Journal of Korean Society of Transportation
• /
• v.36 no.1
• /
• pp.38-50
• /
• 2018

Emerging automated driving environments will lead to a mixed traffic flow depending on the interaction between automated vehicles (AVs) and manually driven vehicles (MVs) because the market penetration rate (MPR) of AVs will gradually increase over time. Understanding the characteristics of mixed traffic conditions, and developing a method to control both AV and MV maneuverings smoothly is a backbone of the traffic management in the era of automated driving. To facilitate smooth vehicle interactions, the maneuvering of AVs should be properly determined by various traffic and road conditions, which motivates this study. This study investigated whether the aggressiveness of AV maneuvering, defined as automated driving aggressiveness (ADA), affect the performance of mixed traffic flow. VISSIM microscopic simulation experiments were conducted to derive proper ADAs for satisfying both the traffic safety and the operational efficiency. Traffic conflict rates and average travel speeds were used as indicators for the performance of safety and operations. While conducting simulations, level of service(LOS) and market penetration rate(MPR) of AVs were also taken into considerations. Results implies that an effective guideline to manage the ADA under various traffic and road conditions needs to be developed from the perspective of traffic operations to optimize traffic performances.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.488-496
• /
• 2015

The main reason to install pedestrian pushbuttons is improving traffic operations. The current guideline for the installation of signal systems with pedestrian pushbuttons is car-oriented. It is difficult to clearly understand the guideline because there isn't an in-depth study to compare the pros and cons of the pedestrian- and vehicle-oriented methods in terms of waiting time. Thus, this study aims to estimate the waiting times of pedestrians and vehicles. The two delay times are compared considering the hypothetical circumstances such as geometry, pedestrian crossing time, pedestrian/vehicle counts and arrival distribution. The results show that when the pedestrian traffic volume exceeds 97 ped/h in the case of a two-lane road (one lane in each direction) the pushbutton system is effective and beneficial to pedestrians. It means that the total waiting time of pedestrians is less than the one of vehicles. Additional four scenarios are designed and tested by varying the number of lanes and design speeds. In conclusion, the pushbutton signal is more beneficial for pedestrians when the number of pedestrians is less than or equal to 85, 70, and 70 ped/h for the three-lane scenario, the four-lane with the design speed of 80km/h scenario, and the four-lane with the design speed of 100km/h, respectively.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.71-82
• /
• 2003

The shortest path problems(SPP) are critical issues in the military logistics such as the simulation of the War-Game. However, the existing SPP has two major drawbacks, one is its accuracy of solution and the other is for only one solution with focused on just link cost in the military transportation planning models. In addition, very few previous studies have been examined for the multi-shortest path problems without considering link capacity reflecting the military characteristics. In order to overcome these drawbacks, it is necessary to apply the multi-shortest paths algorithm reflecting un-expected military incidents. This study examines the multi-shortest paths in the real networks using Shier algorithm. The network contains both military link capacity and time-based cost. Also, the modes are defined as a platoon(group) rather than unit which is used in most of previous studies in the military logistics. To verify the algorithm applied in this study. the comparative analysis was performed with various sizes and routes of network which compares with Dijkstra algorithm. The major findings of this study are as follows ; 1) Regarding the unique characteristics of the military transportation plan, Shier algorithm, which is applied to this study, is more realistic than Dijkstra algorithm. Also, the time based concept is more applicable than the distance based model in the military logistics. 2) Based on the results from the various simulations of this study the capacity-constraint sections appeared in each scenarios. As a consequence, the alternatives are necessary such as measures for vulnerable area, improvement of vehicle(mode), and reflection of separated-marching column in the military manuals. Finally. the limits and future research directions are discussed : 1) It is very hard to compare the results found in this study. which is used in the real network and the previous studies which is used in arbitrary network. 2) In order to reflect the real military situations such as heavy tanks and heavy equipment vehicles. the other constraints such as the safety load of bridges and/or the height of tunnels should be considered for the future studies.

• IE interfaces
• /
• v.18 no.4
• /
• pp.454-464
• /
• 2005

In Postal logistics, the efficient design and operation of transportation network is very important issue. But, it is hard to operate the postal transportation network flexibly according to the change of mail volume. In Korea post, a transportation plan is pre-determined and the transportation of mail is performed through the routes in the plan. When the routes cannot transport all mail, temporary vehicles are used. In the postal transportation, it is important to make a good transportation plan and to manage the plan efficiently. But the change of transportation plan is not a simple work because hundreds of vehicles and persons are related to the plan. So, a methodology to check the effect of the change of the transportation plan in advance is required. In this paper, we develop a simulation model to evaluate the performance of a postal transportation plan. We implement the simulation model and develop an information system including user interface for managing data and simulation results. We apply our simulation model and system to the real change of transportation plan.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.137-144
• /
• 2009

EPCIS(EPC Information Services) system is a core component of EPCglobal Architecture Framework offering information of the freights, the time of awareness and the location of awareness on the EPCglobal Network. The role of EPCIS is to exchange information based on EPC. There are four kinds of event data which are object event data, aggregation event data, quantity event data, and transaction event data. These EPCIS events data are stored and managed in EPCIS repository. This study suggest the quantitative modeling about total number of EPCIS event data under the assumption to aware the RFID tags of items, cases(boxes), vehicles(carriers, forklifts, auto guided vehicles, rolltainers) at a time on the reading points. We also estimate the number of created EPCIS event data by the suggested quantitative modeling under scenario of process in the integrated logistics center based on RFID system And this study compare the TO-BE model with the AS-IS model about the total sizes of created EPCIS event data using the simulation, in which we suggested the TO-BE model as the development of the repository by skipping the overlapped records.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.691-697
• /
• 2006

The objective of this study is to develop the alternative model of the container transport vehicle of high productivity for the purpose of the increase of terminal productivity. In order to develop the alternatives, we analyze the technical specification of existing transport vehicles such as YT(Yard Tractor), S/C(Straddle Carrier), SHC(Shuttle Carrier), and AGV(Automated Guided Vehicle) and investigate the operation and performance of transport vehicles to classify the technical generation. The development alternative of transport vehicle presented in this study will usefully be apply to advanced container terminal with higher productivity in near future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.117-139
• /
• 1999

This paper is concerned about the hybrid tandem configuration as the design of the automated guided vehicle system(AGVs). The hybrid tandem configuration is that the manufacturing system is divided into several non-overlapping zones, workstations of each zone are linked by network configuration including loop. That is, the manufacturing system is divided into several non-overlapping small size networks, and at most two automated guided vehicles can be available in each network. The transit point is located at proper point between adjacent networks. The parts are transported to workstations in other network through the transit points. One of the objective functions in dividing into the hybrid tandem configuration is to minimize the maximum travel time of the divided networks, and other is to minimize the total travel distance of parts moved to workstations in other networks for the next processing. The model formulation is presented, and a numerical example is shown. Also, the performances of system for the hybrid tandem, tandem and network configuration are compared through the simulation. The results of this research will contribute to the development of material handling systems in the manufacturing system. Also, it will be applied in determining the transportation area of transportation vehicles and the number and size of the transportation fleet in the transportation problem of logistics management.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.367-372
• /
• 2006

The objective of this study is to develop the alternative of the container transport vehicle of new type for the purpose of the increase of terminal productivity. In order to develop the alternatives, we analyze the technical specification of existing transport vehicles such as YT(Yard Trailer), S/C(Straddle Carrier), SHC(Shuttle Carrier), AGV(Automated Guided Vehicle) and investigate the operation and performance of transport vehicles to classify the technical generation. The development alternative of transport vehicle is presented in this study is very useful to advanced container terminal with higher productivity.