• Journal of ILASS-Korea
• /
• v.29 no.2
• /
• pp.68-74
• /
• 2024

As awareness of environmental pollution problems increases worldwide, interest in air pollutants is increasing. In particular, NOx and PM, which are major pollutants in diesel vehicles, are contributing significantly to emissions. As a result, its importance is increasing. In this study, based on research results applied to large diesel vehicles, the problem of natural regeneration caused by low exhaust gas temperature during low speed and low load operation is solved by applying a complex regeneration DPF that is not affected by temperature conditions to small diesel vehicles. The feasibility of application to small diesel vehicles was reviewed by measuring the emission reduction efficiency. As a result of the engine test, the power reduction rate and fuel consumption rate before and after device installation under full load conditions were 2.9% decrease and 3.5% increase, respectively, satisfying the standard for a 5% reduction, and as a result of the regeneration equilibrium temperature (BPT) test, the regeneration temperature was 310℃. appeared at the level. The reduction efficiency test results for the actual vehicle durability test equipment showed 97.3% PM, 51.0% CO, and 31.1% HC, while the city commuter vehicle had PM 97.5%, CO 61.7%, HC 40.0%, and the school bus vehicle had PM 96.8%, CO 44.4%, HC 34.3%, and low-speed logistics vehicles showed a reduction efficiency of 98.2% for PM, 36.0% for CO, and 45.7% for HC. Based on the results of this study, in the future, it is necessary to secure DPF technology suitable for all vehicle types through actual vehicle application research on temperature condition-insensitive composite regenerative DPF for medium-sized vehicles.

• Journal of Venture Innovation
• /
• v.5 no.1
• /
• pp.107-127
• /
• 2022

Global challenges such as the corona pandemic, climate change and the war-on-tech ensure that the demand who the technologies of the future develops and monitors prominently for will be on the agenda. Development of, and applications in, agrifood, biotech, high-tech, medtech, quantum, AI and photonics are the basis of the future earning capacity of the Netherlands and contribute to solving societal challenges, close to home and worldwide. To be like the Netherlands and Europe a strategic position in the to obtain knowledge and innovation chain, and with it our autonomy in relation to from China and the United States insurance, clear choices are needed. Brainport Eindhoven: Building on Philips' knowledge base, there is create an innovative ecosystem where more than 7,000 companies in the High-tech Systems & Materials (HTSM) collaborate on new technologies, future earning potential and international value chains. Nearly 20,000 private R&D employees work in 5 regional high-end campuses and for companies such as ASML, NXP, DAF, Prodrive Technologies, Lightyear and many others. Brainport Eindhoven has a internationally leading position in the field of system engineering, semicon, micro and nanoelectronics, AI, integrated photonics and additive manufacturing. What is being developed in Brainport leads to the growth of the manufacturing industry far beyond the region thanks to chain cooperation between large companies and SMEs. South-Holland: The South Holland ecosystem includes companies as KPN, Shell, DSM and Janssen Pharmaceutical, large and innovative SMEs and leading educational and knowledge institutions that have more than Invest €3.3 billion in R&D. Bearing Cores are formed by the top campuses of Leiden and Delft, good for more than 40,000 innovative jobs, the port-industrial complex (logistics & energy), the manufacturing industry cluster on maritime and aerospace and the horticultural cluster in the Westland. South Holland trains thematically key technologies such as biotech, quantum technology and AI. Twente: The green, technological top region of Twente has a long tradition of collaboration in triple helix bandage. Technological innovations from Twente offer worldwide solutions for the large social issues. Work is in progress to key technologies such as AI, photonics, robotics and nanotechnology. New technology is applied in sectors such as medtech, the manufacturing industry, agriculture and circular value chains, such as textiles and construction. Being for Twente start-ups and SMEs of great importance to the jobs of tomorrow. Connect these companies technology from Twente with knowledge regions and OEMs, at home and abroad. Wageningen in FoodValley: Wageningen Campus is a global agri-food magnet for startups and corporates by the national accelerator StartLife and student incubator StartHub. FoodvalleyNL also connects with an ambitious 2030 programme, the versatile ecosystem regional, national and international - including through the WEF European food innovation hub. The campus offers guests and the 3,000 private R&D put in an interesting programming science, innovation and social dialogue around the challenges in agro production, food processing, biobased/circular, climate and biodiversity. The Netherlands succeeded in industrializing in logistics countries, but it is striving for sustainable growth by creating an innovative ecosystem through a regional industry-academic research model. In particular, the Brainport Cluster, centered on the high-tech industry, pursues regional innovation and is opening a new horizon for existing industry-academic models. Brainport is a state-of-the-art forward base that leads the innovation ecosystem of Dutch manufacturing. The history of ports in the Netherlands is transforming from a logistics-oriented port symbolized by Rotterdam into a "port of digital knowledge" centered on Brainport. On the basis of this, it can be seen that the industry-academic cluster model linking the central government's vision to create an innovative ecosystem and the specialized industry in the region serves as the biggest stepping stone. The Netherlands' innovation policy is expected to be more faithful to its role as Europe's "digital gateway" through regional development centered on the innovation cluster ecosystem and investment in job creation and new industries.

• Journal of Korean Society of Transportation
• /
• v.18 no.1
• /
• pp.75-85
• /
• 2000

In existing models in optimization, the crisp data improve has been used in the objective or constraints to derive the optimal solution, Besides, the subjective environments are eliminated because the complex and uncertain circumstances were regarded as Probable ambiguity, In other words those optimal solutions in the existing models could be the complete satisfactory solutions to the objective functions in the Process of application for industrial engineering methods to minimize risks of decision-making. As a result of those, decision-makers in location Problems couldn't face appropriately with the variation of demand as well as other variables and couldn't Provide the chance of wide selection because of the insufficient information. So under the circumstance. it has been to develop the model for the location and size decision problems of logistics facility in the use of the fuzzy theory in the intention of making the most reasonable decision in the Point of subjective view under ambiguous circumstances, in the foundation of the existing decision-making problems which must satisfy the constraints to optimize the objective function in strictly given conditions in this study. Introducing the Process used in this study after the establishment of a general mixed integer Programming(MIP) model based upon the result of existing studies to decide the location and size simultaneously, a fuzzy mixed integer Programming(FMIP) model has been developed in the use of fuzzy theory. And the general linear Programming software, LINDO 6.01 has been used to simulate, to evaluate the developed model with the examples and to judge of the appropriateness and adaptability of the model(FMIP) in the real world.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.2
• /
• pp.111-122
• /
• 2015

This study purposed on introducing a new automated solution for detecting railway tracks and reconstructing track models from the mobile laser scanning data. The proposed solution completes following procedures; the study initiated with detecting a potential railway region, called Region Of Interest (ROI), and approximating the orientation of railway track trajectory with the raw data. At next, the knowledge-based detection of railway tracks was performed for localizing track candidates in the first strip. In here, a strip -referring the local track search region- is generated in the orthogonal direction to the orientation of track trajectory. Lastly, an initial track model generated over the candidate points, which were detected by GMM-EM (Gaussian Mixture Model-Expectation & Maximization) -based clustering strip- wisely grows to capture all track points of interest and thus converted into geometric track model in the tracking by detection framework. Therefore, the proposed railway track tracking process includes following key features; it is able to reduce the complexity in detecting track points by using a hypothetical track model. Also, it enhances the efficiency of track modeling process by simultaneously capturing track points and modeling tracks that resulted in the minimization of data processing time and cost. The proposed method was developed using the C++ program language and was evaluated by the LiDAR data, which was acquired from MMS over an urban railway track area with a complex railway scene as well.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.5
• /
• pp.771-777
• /
• 2013

This study was investigated the relationship between the stress and suicidal ideation of adolescents from multi-cultural families. For the purpose, the study incorporated data of Youth Risk Behavior Web-based Survey 2011-2 and attempted to understand factors of their suicide ideation and reasons of stress, targeting 607 boy students and 543 girl students. For a statistical analysis, SPSS version 17.0 was used. During the analysis, the students one of which parents was not born in Korea were considered as those from multi-cultural families and statistical significance was set to be p<0.05, To look into relations between suicide ideation and reasons of stress with the former as a subordinate variable, the study figured out Odds Ratio(OR) through a simple logistics analysis and a complex sample was set for the analysis. Boy students had 2.70 times more suicide ideation due to stress from associates than girl students while girl students had 2.50 times more suicide ideation due to conflicts with parents than boy students. In conclusion, as there were various reasons of stress relating to individuals, families and school life which may affect suicide ideation of adolescents from multi-cultural families, our society should pay attention especially to improvement of relationships with parents and friends to prevent and control their suicide ideation.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.93-100
• /
• 2011

This dissertation analysed actuality and literatures aimed at optimizing added value of Busan Port. As far as the literatures are concerned, the limits and the direction to go of Busan Port have been reached through analysing and comparing Busan Port, Antwerp Port, and Rotterdam Port by their each function. While Rotterdam and Antwerp Port are each functioning as an integrated port disposing container freight, general freight and liquid cargo, the container of Busan port contributes over 88 percent of its cargo and the function of the others like bulk is scattered to Ulsan, Masan, and Jinjae Port. Hereby, Busan Port needs to develop its function so as not to duplicate its function with the others in Korea and add value of theirs each. As a result of the local experts about analysing actuality, it turn out that it is similar with the literatures. In macroscopic view, specialization mainly with container, general cargo disposal ability enforcement and etc. are the most important. In microscopic view, rear complex of container tier and the supply base of liquid energy.

• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.114-129
• /
• 2010

Busan port's main function is handling container cargo compared to world major ports and the percentage of handling general cargo such as dirty bulk cargo is very low. In other words, although total cargo weight of Busan port that recorded the handling result of 13.29million TEU in 2008 reached 113.05million ton, total cargo weight of general cargo was 15.31million ton, so container cargo accounted for 88.1% of whole cargo weight. However, it is the time to create high added value by the increase of handling and marketing dirty bulk cargo. Originally, the dirty bulk cargo was not the avoided object from the first. Somehow, it is a very high added value cargo, and is surely essential strategic material to basic industries of nation. However, it becomes dirty bulk cargo as the companies are reluctant to handle it because of environmental problem, distinct characteristic in handling, uncertain break even point due to imbalance between supply and demand compared to container cargo. However, items that are classified as dirty bulk cargo now are certainly necessary strategic materials to national basic industries or national life. Besides it seems to be a high added value cargo here and now. Therefore, it is time that increasing of handling dirty bulk cargo by marketing it and the system for efficient handling such as constructing the exclusive use wharf in Busan port, modernizing of facilities and equipments, stable secure of place for holding and handling through development of distribution complex by item, efficient data processing and closer cooperation by setting up a SCM of related authorities are needful.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.227-236
• /
• 2018

The Busan New Port and its hinterland have not operated smoothly due to the complicated laws and various related organizations. Thus, many projects involving the port are not matched with its purpose of establishment. In particular, a large-scale apartment complex, which was constructed without a negotiation among the related organizations, is disturbing the port's logistics function. Also, the construction and management of every traffic facilities are conducted by various organizations due to the functions for the facilities are dispersed among them, which has given rise to chaos and responsibility-shifting. As a result, worries about the friction among the organizations and the loss of function of the port hinterland exist. This paper analyzes the problems of inter-governmental functional distributions in the construction and management of the port hinterland of the Busan New Port based on the principles (theories) of functional distribution. In addition, this paper proposes improvements for the functional distribution. The results of the analysis indicated that the functions for housing and traffic facilities were duplicated and dispersed among organizations, resulting in an unclear division of responsibilities. Finally, the paper proposed solutions for the problems: the institutionalization of an administrative conference system among related organizations, using an integrated administration for a wide area (contracting-out, association among local governments), and establishing a special-purpose local government (association among local governments, BPA).

• Journal of the Korean Geographical Society
• /
• v.49 no.1
• /
• pp.91-105
• /
• 2014

The objective of this study is to analyze the project performance and development process of the phase 1 project of GFEZ from 2004 to 2010. The phase 1 project from 2004 to 2010 is consist of eleven project zones. Among these zones, eight zones are currently underway and three zones have been completed. The performance of the phase 1 projects is no so much because it were stated later than planning with the difficulty of business developers selection. The major performances are development and supply of industrial & residential land, construction of road and railway, investment promotion of 102 companies, and creation of 20,971 new jobs. Most of the direct invested companies were located at Gwangyang and Yulchon Districts, and were mainly logistics and related service, iron and steel, machinery, shipbuilding, and fine chemicals. The main problems, however, are the limit of promotion of high-tech industries and large firms, low FDI reported rate, difficulty of superior business developers, delayed business progress of Hadong district. Therefore, efforts to solve these problems are required for the success of GFEZ.

• Journal of Korean Society of Transportation
• /
• v.33 no.1
• /
• pp.50-60
• /
• 2015

Pedestrians not only walk along roads, but also pass through buildings or across open spaces. This study defines these unusual walk routes as social path. Social path is an informal pedestrian route that is not considered in a pedestrian network, even though it should be regarded as pedestrian route considering the fact that many people actually use this path. In response, current study related to travel behavior cannot evaluate properly due to lack of consideration for realistic travel behavior such as social path. In order to deal with this situation, this study analyzes the effect of social path at two complex centers in Seoul. Evaluation indices are service area analysis and urban network analysis which is one of the spatial network analysis. In particular, we subdivide the network into three steps by the level of network building and analyze each step. As a result, it is revealed that step three which includes social path shows the greatest improvement in pedestrian accessibility. In this regard, we confirm that social path should be considered when evaluating pedestrian accessibility in further studies. Furthermore, a lot of undervalued facilities will be re-appraised in the field of travel behavior.