• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.361-370
• /
• 2003

This paper attempts to improve the existing architecture of location register for location management in Private Network to Network Interface(PNNI)-based wireless ATM networks. Our approach enhances the hierarchical architecture of location registers based on a PNNI hierarchical architecture, which is referred to as the logical hierarchy architecture of location registers. This paper introduces a logical hierarchy architecture for location registers to reduce the cost of their location management. This logical hierarchy architecture of location registers begins with the lowest level physical location registers that are organized into clusters called logical groups. These logical groups are then represented in higher layers by logical nodes. These logical nodes are again grouped into clusters that are treated as single nodes by the next higher layer. In this way, all location registers are included in this tree-type logical hierarchy architecture. Compared with the existing physical hierarchy architecture of location registers, the analysis results show that the proposed logical hierarchy architecture can reduce the number of databases and thereby the average total location management cost.

• Journal of the Korean Society for information Management
• /
• v.19 no.2
• /
• pp.69-92
• /
• 2002

A hybrid information service may include local and/or remote distributed services, both and electronic. Also, a hybrid information service can be described as one which an appropriate range of heterogeneous information services is presented to the user in a consistent and integrated way via a single interface. The purpose of this study is to suggest high-level requirements and logical architecture to design hybrid library. High-level requirements analysis for hybrid library need to contain baseline requirements, basic system requirements, searching, location, requesting, delivery and payment. A logical architecture need to consider logical architecture for hybrid library management system including user access points, hybrid library management system and hybrid library components and 5 layered architecture including presenter, coordinator, mediator, communicator and provider to achieve local simplicity while still supporting complex functionality of hybrid library.

• Information Systems Review
• /
• v.3 no.2
• /
• pp.277-288
• /
• 2001

Of critical importance to the success of any e-commerce site are the two factors: rapid application development and quick response time. A three-tier architecture composed of presentation layer, business layer, and data access layer emerges to allow rapid changes in user interface, business logic, and database structures. Too often, such a logical three-tier architecture is considered as requiring a three-tier physical architecture: Web server, application server, and database server running on separate computers. Contrary to the common belief, a Web stress test reveals that the three-tier logical architecture implemented on a two-tier physical platform guarantees a quicker response time due to the reduction in cross-machine communications. This would lead business firms to economize their spending on e-commerce: increasing the number of physical servers to expedite transaction is not necessarily the best solution. Before selecting a particular hardware configuration, a Web stress test needs to be conducted to compare the relative merits of alternative physical architectures. Together with capacity planning, Web stress test emerges as a powerful tool to build robust, yet economical e-commerce sites.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.171-178
• /
• 2007

In mobile ad hoc networks, an application scenario requires mostly group mobility behavior in the mix of group moving nodes and individually moving nodes. The nodes of those applications tend to belong to the movement group with similar movement behavior. Group mobility is one of the good methods to improve scalability, and reduces the protocol overhead. In this paper, we propose the multicast architecture which regards nodes that have equal group mobility in the heterogeneous group mobility network as the single entity with the multiple interfaces and composes multicast tree, The logical cooperative entity-based multicast architecture accommodates the scalability, the multicast tree simplification, and the protocol overhead reduction which arc obtained from the hierarchical multicast architecture, while it maintains the nat multicast architecture for the data transmission. It also prevents the concentration of the energy consumption dispersing data forwarding load into the several ingress/egress nodes. Results obtained through simulations show that logical cooperative entity based multicast protocol with multiple interfaces offers the protocol scalability and the efficient data transmission.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.75-83
• /
• 2012

Recent science technology research network moves to establish logical private network among specific research groups such as high energy physics and climate, requiring to implement private network by group for each purpose. Up to now, national research networks such as KREONET service high capacity logical private networks. Therefore standardized configuration and management scheme is essential for the deployment of logical private network. In this study, we propose the core service element and protocols for the logical networks over Layer 2 networks. We also propose system architecture that make monitoring and management easier. After that we design and implement monitoring map for logical network based on scheme. For this purpose, we also propose the description system for logical research network to provide data such as operation information, formation information, performance information and failure information of network infrastructure resource.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.361-366
• /
• 2009

Amid the crisis of global climate change, interest in low carbon and energy-saving building has been increasingly growing. Korea is likely to be designated as one of the countries subject to CO2 reduction under the 'Post-2012 Climate System' The efforts to minimize the building energy has been made and in line with the increasing need of low carbon and eco-friendly building, a demand for building evaluation programs has been on the rise. However, the metro logical data which is necessary for such program has not been effectively provided and moreover, the source, calculation method and period remain uncertain. This study was intended to evaluate the regional typical metro logical data (ISO TRY) provided by Korean Solar Energy Society and compile the month of test reference years (TRY), and analyze the regional weather using dry-bulb temperature, wet-bulb temperature and solar irradiance which are regarded the representative metro logical data.

• Journal of the Korean Society of Systems Engineering
• /
• v.8 no.1
• /
• pp.21-28
• /
• 2012

Development of the system that has required performance is the most important figure and that is the key of project succeed. In order to perform that, systems engineering has come to the fore as a solution. In each step of system engineering process, particularly, requirement analysis and derivation, logical solution, architecture design step are known to affect many of the function and efficiency. Of these, this paper focus on architecture design. We introduce methodology for physical architecture design by applying DSM(Design Structure Matrix) methodology which is based on result of logical solution from MBSE methodology.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.233-238
• /
• 2000

CNC machine tool is assembled by central processor, PLC(Programmable Logic Controller), and actuator. The sequential control of machine generally controlled by a PLC. The main fault occured at PLC in 3 control parts. In LC faults, operational fault is charged over 70%. This paper describes diagnosis model and data processing for remote monitoring and diagnosis system in machine tools with open architecture controller. Two diagnostic models based on the ladder diagram. Logical Diagnosis Model(LDM), Sequential Diagnosis Model(SDM), are proposed. Data processing structure is proposed ST(Structured Text) based on IEC1131-3. The faults from CNC are received message form open architecture controller and faults from PLC are gathered by sequential data.. To do this, CNC and PLC's logical and sequential data is constructed database.

• ETRI Journal
• /
• v.45 no.3
• /
• pp.462-478
• /
• 2023

In quantum computing, the use of Pauli frames through software traces of classical computers improves computation efficiency. In previous studies, error correction and Pauli operation tracking have been performed simultaneously using integrated Pauli frames in the physical layer. In such a complex processing structure, the number of simultaneous operations processed in the physical layer exponentially increases as the distance of the surface code encoding logical qubit increases. This study proposes a Pauli frame management architecture partitioned into two layers for a lattice surgery-based surface code and describes its structure and operation rules. To evaluate the effectiveness of our method, we generated a random circuit according to the gate ratios constituting the commonly known quantum circuits and compared the generated circuit with the existing Pauli frame and our method. Simulations show a decrease of about 5% over traditional methods. In the case of experiments that only increase the code distance of the logical qubit, it can be seen that the effect of reducing the physical operation through the logical Pauli frame becomes more important.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.175-181
• /
• 2009

Korean government has developed the 1st version of the National ITS Architecture in 1999 and utilized it as the framework for ITS planning, design, and standardization. The National Architecture now needs to be revised to accommodate environmental changes in ITS market and advancement of ITS core technologies. This study evaluates the current version of the architecture and suggests the directions for revision for a new national ITS architecture. The two most popular methodologies for architecture development-the process-oriented approach and the object-oriented approach-were reviewed, and the process-oriented approach was selected for new architecture development. The concept of the national architecture was then newly defined based on evaluation of the existing architecture. The new National ITS Architecture is suggested to be composed of ITS user services, logical architecture, physical architecture, and project architecture. This study must be followed by actual architecture development efforts and supporting policy actions for successful deployment of the new National ITS Architecture.