• Journal of The Korean Association For Science Education
• /
• v.9 no.1
• /
• pp.19-37
• /
• 1989

The purpose of this study was to investigate the development of logical thinking and scientific reasoning pattern of Korean high school students. To carry out this study subjects were selected about 2,000 Junior high school students, and about 4,100 senior high school students throughout the nation. They were identified as concrete, transitional or formal operational stage with the use of TOLT(the Test of Logical Thinking) by Tobin and Capie(1980), and TOSR(the Test of Scientific Reasoning) by W.A Farmer(1986). This study turned out that more than 76% of Junior high school students were classified as the concrete operational stage and about 44% of senior high school students were classified as the formal operational stage, while about 26% of them were still in the concrete operational level. This study showed that the main factor of the intellectual development of students is learning by the gradual advancement of their grades and especially entrance into the senior high school rather than by the physical growth. This study also showed that there are the take-off stage of the development of logical thinking between fourteen and fifteen years of their ages. Less than 25% of junior high school students were in the formal operational stages which are capable of control of variables, probabilistic, correlation and combinational logic in problem-solving situation, while 33-54% of senior high school students were in the formal operational levels. 38% of junior high school students were in the formal operational stage which is capable of proportional logic, while about 55% of senior high school students were in the formal operational stage. Less than 20% of senior high school students were classified as group of highly capable of scientific reasoning, while more than 23% of them were classified as group of poor capability. It also turned out that there are differences or no differences between male and female students of each school in problem-solving situation regarding each logic approach. These differences were proved to be fluctuating depending on the situations and their grades. The other results of this study is similar to those of other researches such as Tomlinson-Keasey 1972, Coleman 1973, Lawson 1973, Lawson and Renner 1974, Neimark 1975, Han 1982, and Kim 1989.

• Korean Management Science Review
• /
• v.11 no.3
• /
• pp.129-151
• /
• 1994

This paper focuses on method of setting priorities for telecommunications Standardization in which usually includes prioritization, resource allocation, standardization schedule for each SWA is based on prioritization of SWAs. We mainly used the Analytic Hierarchy Process(AHP) and a modified Delphi technique as a method for planning process. Recently, rapid technology evolution in telecommunications fields increases the necessity of developing more and more new standards. Also increased complexity of technologies makes standards more complicated, more specified and more thick than the past ones. As a result, the number of SWAa(Standardization Work Areas) and SWIs(Standardization Work Iterms) is being increased continuously. Furthermore, rapid telecommunication environment changes such as deregulation, liberalization, privatization, regionalization, and globalization surrounding telecommunications standardization grows increasingly important. To cope with these challenges and to make the more efficient use of the limited standardization resources, i.e., time, financial, personal resources, we will suggest logical and rational approach that is a backbone of strategic plan for telecommunication standardization. The telecommunication standardization planning process involves a MCDM(Multi-Criteria Decision Making) process. The Analytic Hierarchy Process(AHP) is a kind of MCDM approach. Our method is based on a combination of a modified Delphi technique and an application of AHP(spreadsheet model). Analyzed data from Delphi technique is used as inputs to AHP. In addition we also focus on the technique how to combine group judgments and to handle a large number of comparisons.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.4
• /
• pp.337-343
• /
• 1996

In this paper, we investigate the defect detection by making use of pre-made reference image data and classify the defects by using the artificial neural network. The approach is composed of three main parts. The first step consists of a proper generation of two reference image data by using a low level morphological technique. The second step proceeds by performing three times logical bit operations between two ready-made reference images and just captured image to be tested. This results in defects image only. In the third step, by extracting four features from each detected defect, followed by assigning them into the input nodes of an already trained artificial neural network we can obtain a defect class corresponding to the features. All of the image data are formed in a bit level for the reduction of data size as well as time saving. Experimental results show that proposed algorithms are found to be effective for flexible defect detection, robust classification, and high speed process by adopting a simple logic operation.

• Archives of Plastic Surgery
• /
• v.40 no.3
• /
• pp.173-180
• /
• 2013

As microvascular techniques continue to improve, perforator flap free tissue transfer is now the gold standard for autologous breast reconstruction. Various options are available for breast reconstruction with autologous tissue. These include the free transverse rectus abdominis myocutaneous (TRAM) flap, deep inferior epigastric perforator flap, superficial inferior epigastric artery flap, superior gluteal artery perforator flap, and transverse/vertical upper gracilis flap. In addition, pedicled flaps can be very successful in the right hands and the right patient, such as the pedicled TRAM flap, latissimus dorsi flap, and thoracodorsal artery perforator. Each flap comes with its own advantages and disadvantages related to tissue properties and donor-site morbidity. Currently, the problem is how to determine the most appropriate flap for a particular patient among those potential candidates. Based on a thorough review of the literature and accumulated experiences in the author's institution, this article provides a logical approach to autologous breast reconstruction. The algorithms presented here can be helpful to customize breast reconstruction to individual patient needs.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.7
• /
• pp.424-433
• /
• 2003

Evolutionary design related to the optimal design of Polynomial Neural Networks (PNNs) structure for model identification of complex and nonlinear system is studied in this paper. The PNN structure is consisted of layers and nodes like conventional neural networks but is not fixed and can be changable according to the system environments. three types of polynomials such as linear, quadratic, and modified quadratic is used in each node that is connected with various kinds of multi-variable inputs. Inputs and order of polynomials in each node are very important element for the performance of model. In most cases these factors are decided by the background information and trial and error of designer. For the high reliability and good performance of the PNN, the factors must be decided according to a logical and systematic way. In the paper evolutionary algorithm is applied to choose the optimal input variables and order. Evolutionary (genetic) algorithm is a random search optimization technique. The evolved PNN with optimally chosen input variables and order is not fixed in advance but becomes fully optimized automatically during the identification process. Gas furnace and pH neutralization processes are used in conventional PNN version are modeled. It shows that the designed PNN architecture with evolutionary structure optimization can produce the model with higher accuracy than previous PNN and other works.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.424-424
• /
• 2003

Evolutionary design related to the optimal design of Polynomial Neural Networks (PNNs) structure for model identification of complex and nonlinear system is studied in this paper. The PNN structure is consisted of layers and nodes like conventional neural networks but is not fixed and can be changable according to the system environments. three types of polynomials such as linear, quadratic, and modified quadratic is used in each node that is connected with various kinds of multi-variable inputs. Inputs and order of polynomials in each node are very important element for the performance of model. In most cases these factors are decided by the background information and trial and error of designer. For the high reliability and good performance of the PNN, the factors must be decided according to a logical and systematic way. In the paper evolutionary algorithm is applied to choose the optimal input variables and order. Evolutionary (genetic) algorithm is a random search optimization technique. The evolved PNN with optimally chosen input variables and order is not fixed in advance but becomes fully optimized automatically during the identification process. Gas furnace and pH neutralization processes are used in conventional PNN version are modeled. It shows that the designed PNN architecture with evolutionary structure optimization can produce the model with higher accuracy than previous PNN and other works.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3247-3255
• /
• 2021

As Probabilistic Safety Assessments (PSAs) are thoroughly conducted for the Site Operating States (SOSs) for a single unit, multi-unit Probabilistic Safety Assessments (MUPSAs) are ongoing worldwide to address new technical challenges or issues. In South Korea, the determination of the site operating states for a single site requires a logical approach with reasonable assumptions due to the fact that there are 4-8 operating units for each site. This paper suggests a simulation model that gives a reasonable expectation of the site operation states using the Monte-Carlo method as a stochastic approach and deterministic aspects such as operational policies. Statistical hypothesis tests were conducted so that the reliance of the simulation results can be guaranteed. In this study, 7 units of the Kori site were analysed as a case study. The result shows that the fraction of full power for all 7 units is nearly 0.45. For situations when more than two units are not in operation, the highest fraction combination was obtained for Plant Operation State (POS) 8, which is the stage of inspection and repairment. By entering various site operation scenarios, the simulation model can be used for the analysis of other site operation states.

• Environmental and Resource Economics Review
• /
• v.22 no.3
• /
• pp.499-520
• /
• 2013

This study proposes an iterative approach to the estimation of the marginal abatement costs of undesirable outputs by computing the slope of the efficient production possibilities frontier on the basis of the efficient projection points generated by the directional output distance function approach due to Fare et al. (2005) based on duality theory. In case of the latter methodology, the estimated marginal abatement costs differ significantly depending on the choice of the directional output vector. In addition, depending on the curvature of the underlying PPF the efficient projection points may be located at a significant distance away from their actually observed counterparts. While it would be more logical to estimate marginal abatement costs as a PPF slope at a point corresponding to the actually observed emissions level, the methodology based on duality theory is likely to produce unstable results due to the problems associated with applying the theorem of implicit function differentiation. Since our methodology is not based on duality theory, our results are immune to both of these problems. We apply our methodology to a sample of Western European countries for the period of 1995-2011 to illustrate our approach.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.55-66
• /
• 2002

In many countries the principle of shielding is employed to permit a more logical approach to restricting new construction and prescribing obstacle marking and lighting. It also reduces the number of cases of new construction requiring review by authorities. Shielding principles are employed when some object, an existing building or natural terrain, already penetrates above one of the obstacle limitation surfaces described in Annex 14. If it is considered that the nature of an object is such that its presence may be permanent, then additional objects within a specified area around it may be permitted to penetrate the surface without being considered as obstacle. The shielding effect of immovable obstacles laterally in final approach and missed approach areas is more uncertain. In certain circumstances, it nay be advantageous to preserve existing unobstructed cross section areas, particularly when the obstacle is close to the runway. This would guard against future changes in either approach or take-off climb area specifications or the adoption of a turned take-off procedure.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.256-263
• /
• 2009

For the power system to keep in a stable operating state, sufficient ancillary services must be available to respond to credible contingency events and return the power system to a satisfactory operating state in the case of contingencies as well as blackout events within specified predefined limits. The logical and reasonable bases of valuing and pricing the ancillary services are required to reach the common ground among market participants. The total amount of black start service transactions is quite small compared to the total ancillary service transactions as well as energy market transactions. Black start services must be provided as one of the ancillary services in the deregulated electricity market. In order to procure and remunerate black start services, it is necessary to quantify the value of the black start sources within the power system. In this paper, an approach to assess the value of the black start service is presented based on the cost-of-service solution. Financial simulation of the influence on market participants for the proposed approach on the service is carried out. The cost of the black start service is allocated in accordance with the principle of "causer pays", and the cost is shared by the producers and consumers equally that created the requirement for the service. Under the present electricity market, the mechanism to recover the cost is not implemented, a new approach to the ancillary services to provide incentive for the service providers has to be studied in the near future.