• Journal of the korean society of oceanography
• /
• 제38권4호
• /
• pp.166-172
• /
• 2003

Multi­Sensor Core Logger (MSCL) is a useful system for logging the physical properties (compressional wave velocity, wet bulk density, fractional porosity, magnetic susceptibility and/or natural gamma radiation) of marine sediments through scanning of whole cores in a nondestructive fashion. But MSCL has a number of problems that can lead to spurious results depending on the various factors such as core slumping, gas expansion, mechanical stretching, and the thickness variation of core liner and sediment. For the verification of MSCL data, compressional wave velocity, wet bulk density, and porosity were measured on discrete samples by Hamilton Frame and Gravimetric method, respectively. Acoustic impedance was also calculated. Physical property data (velocity, wet bulk density, and impedance) logged by MSCL were slightly larger than those of discrete sample, and porosity is reverse. Average difference between MSCL and discrete sample at both sites is relatively small such as 22­24 m/s in velocity, $0.02­-0.08\;g/\textrm{cm}^3$ in wet bulk density, and 2.5­2.7% in porosity. The values also show systematic variation with sediment depth. A variety of factors are probably responsible for the differences including instrument error, various measurement method, sediment disturbance, and accuracy of calibration. Therefore, MSCL can be effectively used to collect physical property data with high resolution and quality, if the calibration is accurately completed.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.284-288
• /
• 2015

Training power tiller operators in safe farming is necessary to avoid farming accidents. With the continuing progress in computational technology, driving simulators have become increasingly popular for conducting such training. Purpose: The objective of this study is to develop mock control devices and data acquisition apparatus for a tiller simulator. Methods: Except for the stand and tail wheel adjusting levers, the mock control devices were developed using a tiller handle assay. The data acquisition apparatus was realized using an embedded data-logging device and LabVIEW, the system design software. Results: The control devices of a real handle assay were successfully mimicked by the mock operator control devices, which used sensors for the relevant measurements. The data from the mock devices were acquired and transmitted to the main computer at intervals of 10 ms via Wi-Fi. Conclusions: The developed mock control devices operate similar to real power tillers and can be utilized in power tiller training simulators.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 특별 심포지엄 논문집
• /
• pp.87-100
• /
• 2007

Marine controlled source electromagnetics (CSEM) or sea bed logging (SBL) is an emerging technology which can provide quantitative information on hydrocarbon reservoir embedded in marine sediment. Electromagnetic responses to the resistive formation saturated with a certain amount of hydrocarbon can be characterized by less attenuated profile otherwise exponentially attenuated fields in conductive sea water or through sediments, and thus can be regarded as a direct indicator of hydrocarbon. In this paper, we introduce the technology of marine CSEM in terms of its physical characteristics and in comparison of typical three-dimensional (3-D) seismic method. History and evolution of commercial marine CSEM are also briefly summarized. We then introduce a representative case history showing how marine CSEM works in reality. Outlook of future applications and technical advances to be made are discussed. Finally, we demonstrate a test example of 2.5-D inversion of synthetic data as the groundwork of 3-D inversion of field data that is to be the ultimate goal of technical development.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권4호
• /
• pp.147-155
• /
• 2006

The drag reduction (DR) and heat transfer efficiency reduction (ER) of non-ionic surfactant were investigated as a function of fluid velocity, temperature, and surfactant concentration. An experimental apparatus consisting of two temperature controlled water storage tanks, pumps, test specimen pipe and the piping network, two flow meters, two pressure gauges, a heat exchanger, and data logging system was built. From the experimental results, it was concluded that existing alkyl ammonium surfactant (CTAC Cethyl Trimethyl Ammonium Chloride) had DR of $0.6{\sim}0.8$ at $1,000{\sim}2,000ppm$ concentration with fluid temperature ranging between $50{\sim}60^{\circ}C$. However, the DR was very low when the fluid temperature was $70{\sim}80^{\circ}C$. The new amine oxide and betaine surfactant(SAOB Stearyl Amine Oxide + Betaine) had lower DR at fluid temperatures ranging between $50{\sim}60^{\circ}C$ compared with CTAC. However, with fluid temperature ranging between $70{\sim}80^{\circ}C$ the DR was $0.6{\sim}0.8$ when the concentration level was $1,000{\sim}2,000ppm$.

• Computers and Concrete
• /
• 제3권2_3호
• /
• pp.79-90
• /
• 2006

This paper describes the results of an investigation into high mass-low velocity impact behaviour of reinforced concrete beams. Tests have been conducted on fifteen 2.7 m or 1.5 m span beams under drop-weight loads. A high-speed video camera has been used at rates of up to 4,500 frames per second in order to record the crack formation, propagation, particle spallation and scabbing. In some tests the strain in the reinforcement has been recorded using "Durham" strain gauged bars, a technique developed by Scott and Marchand (2000) in which the strain gauges are embedded in the bars, so that the strains in the reinforcement can be recorded without affecting the bond between the concrete and the reinforcement. The impact force acting on the beams has been measured using a load cell placed within the impactor. A high-speed data logging system has been used to record the impact load, strains, accelerations, etc., so that time histories can be obtained. This research has led to the development of computational techniques based on combined continuum/discontinuum methods (finite/discrete element methods) to permit the simulation of impact loaded reinforced concrete beams. The implementation has been within the software package ELFEN (2004). Beams, similar to those tested, have been analysed using ELFEN a good agreement has been obtained for both the load-time histories and the crack patterns.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권1호
• /
• pp.35-46
• /
• 2012

Wood pellet is one of biomass energy fuels, which is produced by compressing woody biomass such as sawdust, planer shavings, and whole-tree removal or tree tops and branches leftover after logging into cylindrical form. Latterly much attention has been paid to wood pellet boiler which is suitable for use at various scales in domestic and industrial furnaces for heat production to replace conventional fossil fuel energy sources since the use of wood pellet that is carbon neutral can alleviate global warming. This study presents the result of developing a high efficiency wood pellet boiler with 55MJ/h capacity. Efficiency has been improved by using a rotating disk burner with a shorter screw feeder. Special attention has been paid to the improvement of the safety of the wood pellet boiler from backfire by adopting a double protecting system composed of a shutter and an air curtain. The result shows that the efficiencies of the wood pellet boiler are 97.2% and 89.2% based on lower and higher heating values, respectively, at 15.1kW of heating output.

• 설비공학논문집
• /
• 제19권2호
• /
• pp.133-141
• /
• 2007

The drag reduction (DR) and heat transfer efficiency reduction (HTER) of nonionic surfactant according to the fluid velocity, temperature and surfactant concentration were investigated experimentally. For this study, several kinds of new surfactant which contains amine-oxide and betaine were developed. And experimental apparatus equipped with two water storage tanks temperature controlled, pumps, testing pipe network, two flowmeters, two pressure gauges, heat exchanger, and data logging system was built. Results showed that existing alkyl ammonium surfactant (CTAC) had DR of $0.6{\sim}0.8$ for $1,000{\sim}2,000\;ppm$ in fluid temperature of $50{\sim}60^{\circ}C$ and had very low DR in fluid temperature over $70^{\circ}C$. And new amino oxide and betaine surfactant (SAOB) had lower DR in fluid temperature of $50{\sim}60^{\circ}C$ compared with CTAC but in fluid temperature of $70{\sim}80^{\circ}C$ DR was $0.6{\sim}0.8$ for 1$1,000{\sim}2,000\;ppm$.

• 정보처리학회논문지A
• /
• 제18A권5호
• /
• pp.177-180
• /
• 2011

본 논문에서는 인터럽트의 기록과 재현을 통해 소프트웨어의 실행을 동일하게 재현하는 리코드-리플레이(record-replay) 기법을 제안한다. 전통적인 리코드-리플레이 방법에서는 경합(race) 현상을 대표적인 비결정적 요인으로 간주하여 임계영역으로의 진입/진출, 공유 메모리 접근, 메시지 교환 등을 기록하고 동일한 순서(order)로 재현하는 방법을 다루어 왔다. 하지만, 인터럽트 역시 프로그램의 실행에 영향을 끼칠 수 있는 중요한 비결정적 요인이며, 게다가 인터럽트의 경우 발생 순서는 물론 정확한 발생 시점을 재현하는 것이 필요하다. 이에 본 논문에서는 프로세서 하드웨어가 제공하는 성능 카운터와 디버깅 기능을 이용하여 인터럽트의 발생 시점을 정확하게 기록하고 재현하는 방법을 제안한다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권1호
• /
• pp.36-45
• /
• 2002

본 논문에서는 실제 플래시 메모리와 동일한 특성을 갖는 플래시 메모리 시뮬레이터를 설계 및 구현한 내용을 설명한다. 본 시뮬레이터는 생산 방식, 전체 용량, 블록 크기, 페이지 크기 등 플레시 메모리의 특성을 변화시키면서 실험할 수 있을 뿐만 아니라 정확한 수행 시간과 인자 검증 기능을 제공함으로써, 운영체제 입장에서는 실제 플래시 메모리 장치를 사용하는 효과를 얻을 수 있다. 또한, 내부 루틴의 수행 시간 로깅 기능을 제공함으로써 플래시 메모리 관리 소프트웨어의 병목 지점을 판단할 수 있도록 하였다. 마지막으로, Linux 운영체제 환경에 구현된 시뮬레이터와 실제 플래시 메모리를 장착한 테스트 보드에서 응용 프로그램의 성능 측정 결과를 비교함으로써 본 시뮬레이터가 실제 플래시 메모리 장치 대용으로 사용할 수 있음을 보였다.

• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.95-103
• /
• 2019

Safety and welfare of forestry is very poor because of poor working environment, decreasing workforce and budget, and aging. These have brought many accidents and casualties. The accident rate in the field of forestry were about 2.83 times higher than average of an entire industry and mortality rate were 1.84 times higher than it. The most reason among the mortality accident was caught in, under or between objects and struck by objects. In analysis of 60 serious accident cases, the number of occurrence s of caught in, under or between objects and struck by objects were the highest. We suggest education, engineering, environment, and enforcement methods which is first aid education and emergency response system, equipment of combined IoT technologies and sensors, and certification and career program on the basis of the results.