• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.141-142
• /
• 2014

최근 개인정보 유출 사건으로 이를 이용한 2차적 피해에 대한 우려가 높아지고 있다. 아이디와 패스워드 같은 정보가 유출되더라도 추가적인 피해를 막기 위한 대책이 필요하다. 본 논문은 똑같은 단어를 타이핑 하더라도 사용자 마다 다른 패턴을 분석, 추출하여 로그인 시스템에 적용하는 기법을 제시한다. 즉 타인이 본인의 패스워드를 알아내 입력하더라도 다른 타이핑 패턴으로 인해 접근을 막는 시스템이다. 이를 위해 개인의 타이핑 패턴을 추출하는 알고리즘을 개발하고 이것을 바탕으로 적정 수준의 일치성을 가지는 패턴을 찾아내는데 이용할 수 있다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2009년도 추계학술발표대회
• /
• pp.803-804
• /
• 2009

To accommodate constantly growing knowledge in scientific discourse that is revised over time by domain experts, we need to also evolve our ontology. The body of knowledge will get structured and refined as we develop a deeper understanding of issues. Keeping trail of new changes in semantically rich and formally sound mechanism has pragmatic advantages for providing the undo and redo facility and ontology recovery to a previous state. In this research, we have proposed a framework that support change logging and then using these logged changes for reverting ontology to a previous consistent state and visualization of change effects on ontology. The system is compared with ChangesTab of $Prot{\acute{e}}g{\acute{e}}$ and the results depict better accuracy for our system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.541-545
• /
• 1996

In this paper, The performance and functions of automatic flatness control system installed on the 4 hi-reversing mill and has been investigated under actualconditions. A new automatic flatness control system incorporates a measuring roll for measurement and correction calculations, hydraulic roll benders, selective roll cooling, and a programmable controller for interface and data logging. The test results are as following. The more the exit steel strip thickness is thick, the smaller the I value, and the more it is thin, the larger the I value. And, a complex distribution of strip tension was controlled, for example, not only a quarter buckle but also a simple center wave and edge wave. Because the tension deviation is larger at acceleration speed and deceleration speed than steady speed, so automatic flatness control system of contact type is better to adopt over 450 m/min, automatic flatness control system reduces rapidly large flatness deviation. The maximum I value of strip has been decreased to 13 I, and defects caused by poor flatness have been drastically decreased. And coolant temperature for work roll cooling system on the automatic flatness control system is better to adopt about 50-55 .deg. C.

• 한국농공학회지
• /
• 제19권3호
• /
• pp.4449-4461
• /
• 1977

Subsurface Drinage Problems arise from many causes. Flatland tends to be poorly drained, particularly where the subsoil permeability is low. There are many wet areas, however, where there is no evident connection between the area of seepage, or a high water table, and the topography of the site. High water tables may occur where the soil is either slowly or rapidly permeable, where the climate is either humid or arid, and where the land is either sloping or flat. This study is to bring light on subjects relating to increasing yield of crop and possibility of double crops a year in water logging paddy fields. Obtained results are briefly summarized as follows: 1. Effect of crop-yield in the plot A resulted 20.2 percent higher than the ordinary plot with yield of brown rice. 2. Possibility of double-crops a year is investigated. Effect of the barley production of the test plot resulted 168.2 percent higher than the other uplands near test plot with the yield of 1977 production and it is 3.8 percent higher compare with the yearly yields. 3. Decreasing depth of water level was measured 23.9mm per day and 14.3mm per day at the test plot and ordinary plot respectively and the amounts of subsurface drainage measured 30mm to 35mm per day. It is required that the relief well should be controled carefully and adequately. 4. Mean depth of ground water levl was measured 0.4∼0.5m regardless the width of corrugated pipe. It is significantly lowere than the ordinary plot(0.15∼0.20m) 5. The ground temperature of the test plot is higher 1 degree of centigarade or more than the ordinary plot and soil moisture content of the ordinary plot is higher 12.4∼27.8 percent than the plot reversely. There should be a relationship between rising of ground temperature and soil moisture.

• 한국정보과학회논문지:데이타베이스
• /
• 제36권5호
• /
• pp.374-385
• /
• 2009

플래시 메모리는 비휘발성이면서도 작고 가벼우며, 전력 소모가 적고 충격에 강하다는 장점 등으로 인해 휴대 기기를 포함한 다양한 기기의 저장매체로 사용되고 있다. 그러나 플래시 메모리는 하드디스크와는 달리 제자리 갱신이 불가능하고, 읽기 연산에 비해 쓰기 및 지우기 연산이 매우 느리기 때문에, 기존의 하드 디스크를 기반으로 설계된 데이터베이스 시스템은 플래시 메모리 상에서 최적의 성능을 내기 어렵다. 플래시 메모리 상에서 데이터베이스의 성능을 극대화하기 위해, 어떤 데이터에 변경이 발생하면 원래 위치의 데이터를 덮어쓰는 대신, 해당 데이터의 변경 사항에 대한 로그만을 다른 위치에 기록하는 방식들이 제안되었다. 본 논문에서는 플래시 메모리 기반의 데이터베이스 시스템을 위한 효율적인 로깅 방법을 제안한다. 제안하는 방법은 기존 방법들과 달리, 로그만을 저장하는 로그 블록들을 별도로 두고 데이터의 변경에 따라 발생하는 로그를 로그 블록들에 고르게 분포시킨다. 이를 통해 제안하는 방법은 페이지 쓰기 및 블록 지우기 연산의 횟수를 크게 감소시킬 수 있다. 합성 데이터와 TPC-C 벤치마크 데이터를 사용한 실험을 통해, 제안하는 방법은 기존의 방법에 비해 좋은 성능을 나타냄을 보였다.

• Journal of Forest and Environmental Science
• /
• 제34권4호
• /
• pp.304-312
• /
• 2018

This study investigates to identify the impact factors of timber production cost on the relationship between production cost components and revenues generated by evaluating the entire timber supply chain. In this research, selected 13 logging zones as target areas and classified 14 forest production cost factors, six groups. Additionally, established 13 externalenvironmental factors with related stakeholders and forestry experts. And the BCR (Benefit Cost Ratio) method was then used to analyze the economics of each zone. Filled up a checklist and rated using 5 point scale for each target region, and extracted major cost factors for the production economy of the item. The analysis of major cost factors in the timber production revealed that wood grab equipment usage fee was the first ranked and forest trees purchase cost was ranked in the $2^{nd}$Also, the $3^{rd}$ranking was logging expenses, and transport cost, which accounted for 84% of the total cost, was ranked in the $4^{th}$. In addition, the rock land ratio, slope, timber payment (forest trees purchase cost), special timber, ratio of timber, DBH (Diameter at Breast Height), and mixed forest ratio were the factors that most affected the timber supply chain cost.

• Advances in environmental research
• /
• 제2권2호
• /
• pp.81-98
• /
• 2013

Mercury (Hg) dynamics in the boreal environment have been a subject of concern in recent decades, due to the exposure of local populations to the contaminant. Land use, because of its impact on mercury inputs, has been highlighted as a key player in the sources and eventual concentrations of the heavy metal. In order to evaluate the impact of watershed disturbances on Hg dynamics in frequently fished, large boreal lakes, we studied sediment cores retrieved at the focal point of eight large lakes of Qu$\acute{e}$bec (Canada), six with watersheds affected by land uses such as logging and/or mining, and two with pristine watersheds, considered as reference lakes. Using a Geographical Information System (GIS), we correlated the recent evolution of land uses (e.g., logging and mining activities) and morphological characteristics of the watershed (e.g., mean slope of the drainage area, vegetation cover) to total Hg concentrations (THg) in sedimentary records. In each core, THg gradually increased over recent years with maximum values between 70 and 370 ng/g, the lowest mercury concentrations corresponding to the pristine lake cores. The Hg Anthropogenic Sedimentary Enrichment Factor (ASEF) values range from 2 to 15. Surprisingly, we noticed that the presence of intense land uses in the watershed does not necessarily correspond to noticeable increases of THg in lake sediments, beyond the normal increment that can be attributed to Hg atmospheric deposition since the beginning of the industrial era. Rather, the terrestrial Hg inputs of boreal lakes appear to be influenced by watershed characteristics such as mean slopes and vegetation cover.

• 정보과학회 논문지
• /
• 제42권1호
• /
• pp.107-113
• /
• 2015

데이터베이스 시스템에서, 트랜잭션이 수행한 변경 사항은 커밋 전 2차 저장장치에 보존되어야 한다. 일반적 2차 저장장치는 비휘발성 미디어의 처리 지연을 보완하기 위해 휘발성 DRAM 캐시를 가지고 있다. 그러나 휘발성 DRAM에만 쓰여지는 로그들은 영구성을 보장할 수 없으므로, DRAM 캐시에서 저장매체로 로그를 쓰는 지연 시간을 감출 수 없다. 최근 이러한 단점 극복을 목적으로 DRAM 캐시에 커패시터를 장착한 플래시 SSD가 등장하였다. 이러한 비휘발성 캐시를 가지는 저장 장치는 DRAM 캐시에 로그를 쓰고 즉시 커밋 가능하므로, 커밋 대기를 줄이고 트랜잭션 처리량을 증가시킬 것이다. 본 논문은 커패시터 백업 캐시를 사용한 SSD를 로그 저장소로 사용한 경우 데이터베이스의 트랜잭션 처리 성능에 대해 실험 및 분석 한다. 로그를 낸드 플래시에 저장하지 않고 DRAM 캐시에 저장한 직후 커밋 함으로써, 3배 이상의 처리량 향상이 가능하다. 또한 적절한 튜닝을 거친 후 이상적 로그 성능의 73% 이상을 보인다.

• 건축역사연구
• /
• 제29권6호
• /
• pp.101-112
• /
• 2020

This study focuses on the construction of Gyeongbokgung Palace in the second year of King Gojong's reign, which has been spotlighted for political and economic history. The author analyzed the contents of wood procurement with the Yeonggeon Diary, which records each day of construction site. The results are as follows: First, the 2nd year of King Gojong's reign, Yeonggeon of Gyeongbokgung Palace, was a new building that reflected the old system and 270 years of changed environment on the existing site. Despite the poor economic conditions, it began with years of effort and voluntary volunteer work and dedication. Second, the priority of timber transport was recruiting people in the whole process and the supply and demand of transportation tools. Carrying lumber from the mountains to the riverside and floating it at the right time were all a matter of manpower. Soldiers and carts were used to carry timber that arrived in Hangang River to the construction site. The cart was a consumable product, so it was necessary to continuously use the wood to make cart at the site. Third, fire and flood were the biggest obstacles to the Yeonggeon schedule of Gyeongbokgung Palace. Especially the fire was fatal. It was difficult to extinguish the fire in temporary structure, where was the storage for wood to construct. These disasters greatly affected the construction cost and construction period. Wood procurements of Gyeongbokgung Palace were based on public offerings. At the same time, recycled materials from other palace wood and nearby houses, nationwide buying of private mountain wood, the logging of royal tombs and some of the buildings of Gyeonghui Palace and Changgyeong Palace were relocated.

• 농업과학연구
• /
• 제49권2호
• /
• pp.317-330
• /
• 2022

Recently, the policy regarding climate change in Korea and overseas has been to promote the utilization of forest biomass to achieve net zero emissions. In addition, with the implementation of the unused forest biomass system in 2018, the size of the Korean market for manufacturing wood pellets and wood chips using unused forest biomass is rapidly expanding. Therefore, it is necessary to estimate the total amount of unused forest biomass that can be used as an energy source and to identify the capacity that can be continuously produced annually. In this study, we estimated the actual forest area that can be produced of logging residue and the potential amount of unused forest biomass resources based on GT (green ton). Using a forest functions classification map (1 : 25,000), 5th digital forest type map (1 : 25,000), and digital elevation model (DEM), the forest area with a slope of 30° or less and mountain ridges of 70% or less was estimated based on production forest and IV age class or more. The total forest area where unused forest biomass can be produced was estimated to be 1,453,047 ha. Based on GT, the total amount of unused forest biomass potential resources in Korea was estimated to be 117,741,436 tons. By forest type, coniferous forests were estimated to be 48,513,580 tons (41.2%), broad-leaved forests 27,419,391 tons (23.3%), and mixed forests 41,808,465 tons (35.5%). Data from this research analysis can be used as basic data to estimate commercial use of unused forest biomass.