• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.97-101
• /
• 1989

변형불변 패턴인식을 실현하기 위하여 크기와 회전변위에 대해 불변인 극-로가리즘 좌표변환을 이용하였고, 좌표 변환을 수행하기 위하여 Lee 방식의 투과함수를 갖는 CGH를 CAD용 포토(UV light)패턴 발생기에 의해 마스크로 제작하였다. 광학적으로 좌표변환된 입력패턴은 본 논문에서 제시한 광상관기에 입력되었으며, 실시간 홀로그래피에 의한 기록매질로서 $BaTiO_3$ 단결정을 정합필터로 사용하였다. 본 논문에서 제시한 광상관기를 사용하여 크기와 입력에 대한 자기상관값의 변화를 실험적으로 제시함으로서 변형불변 패턴인식을 증명하였다.

• 약학회지
• /
• 제44권4호
• /
• pp.308-314
• /
• 2000

Logarithmic transformation of pharmacokinetic parameters is routinely used in bioequivalence studies based on pharmacokinetic and statistical grounds by the United States Food and Drug Administration (FDA), European Committee for Proprietary Medicinal Products (CPMP), and Japanese National Institute of Health and Science (NIHS). Although it has not yet been recommended by the Korea Food and Drug Administration (KFDA), its use is becoming increasingly necessary in order to harmonize with international standards. In the present study, statistical procedures for the analysis of a bioequivalence based on the log transformation and a related SAS procedure were demonstrated in order to aid the understanding and application. The AUC parameters used in this demonstration were taken from the previous bioequivalence study for two aceclofenac tablets, which were performed in a single-dose crossover design. Analysis of variance (ANOVA), statistical power to detect 20% difference between the tablets, minimum detectable difference and confidence intervals were all assessed following log-transformation of the data. Bioequivalence of two aceclofenac tablets was then estimated based on the guideline of FDA. Considering the international effort for harmaonization of guidelines for bioequivalence tests, this approach may require a further evaluation for a future adaptation in the Korea Guidelines of Bioequivalence Tests (KGBT).

• Korea-Australia Rheology Journal
• /
• 제17권3호
• /
• pp.99-110
• /
• 2005

This work presents results of finite element analysis of isothermal incompressible creeping viscoelastic flows with the tensor-logarithmic formulation of the Leonov model especially for the planar geometry with singular comers in the domain. In the case of 4:1 contraction flow, for all 5 meshes we have obtained solutions over the Deborah number of 100, even though there exists slight decrease of convergence limit as the mesh becomes finer. From this analysis, singular behavior of the comer vortex has been clearly seen and proper interpolation of variables in terms of the logarithmic transformation is demonstrated. Solutions of 4:1:4 contraction/expansion flow are also presented, where there exists 2 singular comers. 5 different types spatial resolutions are also employed, in which convergent solutions are obtained over the Deborah number of 10. Although the convergence limit is rather low in comparison with the result of the contraction flow, the results presented herein seem to be the only numerical outcome available for this flow type. As the flow rate increases, the upstream vortex increases, but the downstream vortex decreases in their size. In addition, peculiar deflection of the streamlines near the exit comer has been found. When the spatial resolution is fine enough and the Deborah number is high, small lip vortex just before the exit comer has been observed. It seems to occur due to abrupt expansion of the elastic liquid through the constriction exit that accompanies sudden relaxation of elastic deformation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권2호
• /
• pp.713-725
• /
• 2022

Mostly, artificial intelligence does not show any definite change in emotions. For this reason, it is hard to demonstrate empathy in communication with humans. If frequency modification is applied to neutral emotions, or if a different emotional frequency is added to them, it is possible to develop artificial intelligence with emotions. This study proposes the emotion conversion using the Generative Adversarial Network (GAN) based voice frequency synthesis. The proposed method extracts a frequency from speech data of twenty-four actors and actresses. In other words, it extracts voice features of their different emotions, preserves linguistic features, and converts emotions only. After that, it generates a frequency in variational auto-encoding Wasserstein generative adversarial network (VAW-GAN) in order to make prosody and preserve linguistic information. That makes it possible to learn speech features in parallel. Finally, it corrects a frequency by employing Amplitude Scaling. With the use of the spectral conversion of logarithmic scale, it is converted into a frequency in consideration of human hearing features. Accordingly, the proposed technique provides the emotion conversion of speeches in order to express emotions in line with artificially generated voices or speeches.

• Computers and Concrete
• /
• 제5권4호
• /
• pp.295-328
• /
• 2008

A previously published multiscale model for early-age cement-based materials [Pichler, et al.2007. "A multiscale micromechanics model for the autogenous-shrinkage deformation of early-age cement-based materials." Engineering Fracture Mechanics, 74, 34-58] is extended towards upscaling of viscoelastic properties. The obtained model links macroscopic behavior, i.e., creep compliance of concrete samples, to the composition of concrete at finer scales and the (supposedly) intrinsic material properties of distinct phases at these scales. Whereas finer-scale composition (and its history) is accessible through recently developed hydration models for the main clinker phases in ordinary Portland cement (OPC), viscous properties of the creep active constituent at finer scales, i.e., calcium-silicate-hydrates (CSH) are identified from macroscopic creep tests using the proposed multiscale model. The proposed multiscale model is assessed by different concrete creep tests reported in the open literature. Moreover, the model prediction is compared to a commonly used macroscopic creep model, the so-called B3 model.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.574-576
• /
• 2004

Since variance of noise is important parameter for a noise filter to reduce noise in image and the performance of noise filter is dependent on estimated variance. In this paper, we apply additive noise variance estimation method to estimate variance of speckle noise of synthetic aperture radar (SAR) imagery. Generally, speckle noise is in multiplicative model, logarithmic transformation is then used to transform multiplicative model into additive model. Here, speckle noise is generally modeled as Gamma distribution function with different looks. The additive noise variance estimation is processed in log domain. The synthesis image and real image of SAR are implemented to test and confirm results and show that more accurate estimation can be achieved.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.347-352
• /
• 1998

The purpose of this paper is to present and establish a procedure to predict the prestress forces during the service life of the structure. The statistical approach of this procedure is using the in-situ measurement data of the post-tensioning system to develop a nonlinear regression analysis. The method of least squares is used to fit a certain function a set of data. Use of a nonlinear model is achieved by its logarithmic transformation and sunsequent use of linear-regression theory. The regression analysis result can be used to check the prestress force during the service life so that the remaining prestress force is equal to or exceeds the design requirement. Results from the measurement data of PSC box girder bridge structure were used to demonstrate the procedures.

• Wind and Structures
• /
• 제6권5호
• /
• pp.357-386
• /
• 2003

A number of methods based on various ideas have been proposed for simulating the non-Gaussian stationary process. However, these methods have some limitations. This paper reviewed several simulation methods based on the translation method using logarithmic and polynomial functions, which have emerged in the history of statistics and in the field of civil engineering. The applicability of each method is discussed from the viewpoint of the reproducibility of higher order statistics of the object function in the simulated sample functions, and examined using pressure signals measured from wind tunnel experiments for various shapes of buildings. The parameter estimation methods, i.e. the method of moments and quantile plot, are also reviewed, and the useful aspects of each method are discussed. Additionally, a simple worksheet for parameter estimation is derived based on the method of moment for practical application, and the accuracy is discussed comparing with a set of previously proposed formulae.

• Journal of applied mathematics & informatics
• /
• 제7권3호
• /
• pp.941-958
• /
• 2000

Euler method is generalized to solve the system of nonlinear differential equations. The generalization is carried out by taking a special constant matrix S so that exp(tS) can be exactly computed. Such a matrix S is extracted from the Jacobian matrix of the given problem. Stability of the generalized Euler process is discussed. It is shown that the generalized Euler process is comparable to the fourth order Runge-Kutta method. We also exemplify that the important qualitative and geometric features of the underlying dynamical system can be recovered by the generalized Euler process.

• 열처리공학회지
• /
• 제11권1호
• /
• pp.27-34
• /
• 1998

Effects of different heat treatments on microstructure and damping capacity of Cu-55%Mn alloy were investigated to find an optimum heat treatment condition for a maximum damping capacity. The alloy showed the high level of damping capacity in case of the aging at 375 and $400^{\circ}C$. This is ascribed to the FCC${\rightarrow}$FCT martensitic transformation and microstructural changes from mottled to tweed band type. The damping capacity had a maximum value of 0.33 in logarithmic decrement when the alloy was aged at $375^{\circ}C$ for 14 hours followed by 20 times of thermal cycling between room temperature and $250^{\circ}C$. The refinement of tweed structure by thermal cycling is thought to be responsible for the highest damping capacity.