• Macromolecular Research
• /
• v.9 no.1
• /
• pp.20-29
• /
• 2001

Interfacial adhesion and nondestructive behavior of electrodeposited (ED) carbon fiber rein-forced composites were evaluated using electro-micromechanical techniques and acoustic emission (AE). The interfacial shear strength (IFSS) of the ED carbon fiber/epoxy composites was higher than that of the untreated fiber. This might be expected because of the possibility of chemical or hydrogen bonding in an electrically adsorbed polymeric interlayer. The logarithmic electrical resistivity of the untreated single-carbon fiber composite increased suddenly to infinity when fiber fracture occurred, whereas that of the ED composite increased relatively gradually to infinity. This behavior may arise from the retarded fracture time due to enhanced IFSS. In single- and ten-carbon fiber composites, the number of AE signals coming from interlayer failure of the ED carbon fiber composite was much larger than that of the untreated composite. As the number of the each first fiber fractures increased in the ten-carbon fiber composite, the electrical resistivity increased stepwise, and the slope of the logarithmic electrical resistance increased.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.481-488
• /
• 1997

Microorganisms capable of degrading trlchloroethylene(TCEI using phenol as a induction substrate were isolated from industrial effluents and soil. The strain MS-64K which had the highest blodegradablllty was identified as the genus Micrococcus. The optimal conditions of medium for the growth and blodegadatlon of trlchloroethylene were observed as follows; the initial pH 7.0, trlchloroethylene 1, 000ppm as the carbon source, 0.2% ${(NH_4)}_2SO_4$, as the nitrogen source. respectively. Lag period and degradation time on optimal medium were shorter than those on Isolation medium. Growth on the optimal medium was Increased. Addition of 0.1% Triton X-100 Increased the growth rate of Micrococcus sp. MS-64K, but degradation was equal to optimal medium. Trlchloroethylene degradation by Micrococcus sp. MS-64K was shown to fit logarithmic model when the compound was added at initial concentration of 1, 000ppm.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.4
• /
• pp.43-52
• /
• 2005

It is known in some literatures that the B value is not equal to unity in saturated soil when effective stress is given, in which the B Value is the ratio of measured excess pore water pressure and isometric loading pressure. In this study the B value was measured on various effective stresses and on various incremental loading stresses in various grain size of specimens with saturated sand. The test results showed that the B value was affected largely by grain size of sand in specimen and the amount of effective stress. There was the semi-logarithmic relationship between B value and effective stress, and also there was the linear relationship between the gradient of the former semi-logarithmic relationship and grain size of specimen.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.10
• /
• pp.1554-1560
• /
• 1989

This paper suggests the algorihtm which extracts the classification parameter relative to the only feature of document patterns even though they are rotated or scaled, and also classifies them. With the complex logarithmic conformal mapping, the sample of the document pattern image makes the pattern image of the complex logarithmic plane. Because the power spectrum of this plane is invariant to the rotation, and scale of the pattern image, it is used as the characteristics parameter of the patten image. By using the coherence function, this method analyzes the standard and input power spectrum. additionally, it classifies the input pattern image. Even though input image is rotated, our algorithm can classify it without reference to the rotation, and this is possible when the scale is in the range of 0.5-1.5.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.264-267
• /
• 2004

Cure monitoring and nondestructive characteristics of carbon fiber/epoxy composites were evaluated by the measurements of electrical resistance and acoustic emission (AE). Logarithmic electrical resistivity of the untreated single-carbon fiber composite increased suddenly to infinity when the fiber fracture occurred, whereas that of the electrodeposited composite increased relatively broadly up to infinity. As curing temperature increased. logarithmic electrical resistivity of steel fiber increased. On the other hand, electrical resistance of carbon fiber decreased due to the intrinsic electrical properties based on the band theory. The apparent modulus of the electrodeposited composite was higher than that of the untreated composite due to the improved interfacial shear strength (IFSS).

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.88-91
• /
• 2017

넓은 동적 영역 (high dynamic range: HDR) 이미지는 시각적으로 우수하지만 대부분의 디스플레이는 좁은 동적 영역 (low dynamic range: LDR)만 지원이 가능하다. 이를 해결하기 위해서 톤 매핑 기법 (tone mapping operator: TMO)을 사용한 동적 영역 압축을 수행한다. 기존의 적응적 로그 매핑 (adaptive logarithmic mapping)의 경우 에지 부분에서 디테일이 손실되는 문제점이 있었다. 본 논문에서는 가이디드 이미지 필터링 (guided image filtering: GIF)을 통해 베이스 레이어와 디테일 레이어로 나눠서 처리하는 알고리듬을 제안한다. 베이스 레이어는 적응적 로그 매핑을 통해 동적 영역을 압축하고 디테일 레이어와 더해 기존의 톤 매핑 과정에서 발생하는 디테일의 손실을 감소시켰다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.411-418
• /
• 2000

By calculating the location and size of the relative eddy formed in the rotating impellers with the logarithmic spiral vanes, a new simple but accurate slip factor is analytically derived. The proposed slip factor depends on only one parameter that is a function of the number of vanes and the vane exit angle. Predicted slip factor for various cases are compared with those estimated by a number of previous slip factors as well as a recent theoretical calculation by Visser et al. ( JFM, Vol. 268, pp. 107-141, 1994). It is found that the present slip factor yields almost similar results to Wiesner's which has been empirically formulated based on the theoretical calculation of Busemann.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.5
• /
• pp.235-242
• /
• 2020

This paper analyzes the effect of reduced output width of the truncated logarithmic multiplication and application to inferences using convolutional neural networks (CNNs). For small hardware overhead, output width is reduced in the truncated Mitchell multiplier, so that fractional bits in multiplication output are minimized in error-resilient applications. This analysis shows that when reducing output width in the truncated Mitchell multiplier, even though worst-case relative error increases, average relative error can be kept small. When adopting 8 fractional bits in multiplication output in the evaluations, there is no significant performance degradation in target CNNs compared to existing exact and original Mitchell multipliers.

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.680-686
• /
• 2010

Inhibition effects of alanine(Ala), asparagine(Asn), aspartic acid(Asp), glutamine(Gln) and methionine(Met) on the corrosion of copper were investigated in aerated artificial sea water. Amino acid adsorption process in copper surface can be explained by Temkin logarithmic isotherm due to the interaction between the adsorbed molecules. The inhibition efficiency for the copper corrosion depended on the concentration of amino acids.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.59-65
• /
• 1997

The calibration of O.M.D is carried out experimentally and is analysed theoretically. O.M.D experimentally measures the change in optical density of artificially contaminated oil which contains Fe powder of 5, 10, 20, 30, 40, 50, 70, 100, 200 ppm. The change in optical density, D$_1$ means the logarithmic transmittance of I$_0$ over $I_1 D_2$ denotes the logarithmic transmittance I$_2$ over I$_1$ on electromagnetic force which arranges the ferrous particles along the line of magnetic force. The theoretical D$_1$ which increases linearly as increasing Fe concentrations, is analysed by light attenuation theory. The difference between theoretical D$_1$ and experimental D$_1$ is due to the attenuation of micro bubbles and the agglomeration of fine particles in the sample oil. The calibrated O.M.D is applied to the sample oil from the high-powered diesel engine. Also the results are compared with those out of the off-line techniques such as JOAP and ICP.