• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.851-852
• /
• 2013

• 조명전기설비학회논문지
• /
• 제25권9호
• /
• pp.1-7
• /
• 2011

A performance delivers the contents and feeling through human bodies and stage settings in the limited space of a stage. Among the stage settings, the lighting creates overall atmospheres effectively according to the situations of the performance such as a time flow, a change of seasons, an expression of the mental state of the performer. As the LED lighting is used more widely, the number and the size of the lighting is being decreased, which makes it possible for various devices to be used. However, just as conventional lighting devices, most of them are fixed. So it is difficult to use them at a blind spot and to replace them. To solve this problem, this article suggests a system which replaces lighting automatically and moves. As it can moved to a spot we want on a rail, and the lighting system can be replaced by itself, it can have various lighting effects, increasing the effectiveness of the performance. Additionally, it can also decrease the danger of a worker operating the lighting device located at a high place. At the mock-up experiment, its mobility and stability on a rail were tested using the wheel of the Modular Robot.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.247-252
• /
• 2005

쐐기형 레일클램프는 작은 초기 압착력으로 레일을 압착한 후 풍속이 증가함에 따라 쐐기작용에 의해 압착력이 증가하여 레일을 강하게 압착하는 구조를 가지고 있다. 쐐기형 레일클램프를 설계하기 위해서는 쐐기작용을 위한 적정 쐐기각과 초기압착력 발휘를 위한 적정 Locker의 물림각을 결정해야 한다. 적정 쐐기각에 관한 연구는 이미 수행되었으며, 본 연구에서는 Locker의 적정 물림각을 설정하기 위하여 이전 연구를 바탕으로 $10^{\circ}$의 쐐기각을 갖는 레일클램프에서 Locker의 물림각과 Jaw pad의 압착력 사이의 상관관계를 실험적 분석을 통해 살펴보았다. 레일클램프의 초기 압착력은 Locker의 물림각에 의해 결정되므로 3, 4, 5, $6^{\circ}$의 4가지 Locker의 물림각에 따른 Locker의 물림력을 압력게이지를 이용하여 측정한 후 Jaw pad의 압착력을 산출하여 유한요소해석결과와 비교하였다.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.298-302
• /
• 2016

Currently, logistics are in small quantities and in diverse forms, and the amounts are continuously increasing. Railway logistics however are losing their market share every year mainly due to low operation speed and loading time, which means the trucks are covering the most of the freights. In order to solve these situations, this paper proposed the high speed freight train as working multi-modality with other modes to make effective transshipment. The high speed freight train has maximum operation speed of 300km/h and electric power to run centralized power supply. There are large dual door system, bogie system covering fluctuating load of 15[ton], automatic loading device, ULD(unit load device) bed and ULD locking system in this freight rolling stock. We calculated the performance of powering and braking capacity for this train and proposed how many vehicles are composed of train set. The results in this paper can help to make a decision to define the technical specification of High-speed freight train for the efficiency of rail freight service.

• Structural Engineering and Mechanics
• /
• 제17권1호
• /
• pp.113-140
• /
• 2004

A mixed eight-node hexahedral element formulated via the Hu-Washizu principle as well as the field extrapolation technique is presented. The mixed element with only three translational degrees of freedom at each node can provide extremely accurate and reliable performance for popular benchmark problems such as spacial beams, plates, shells as well as general three-dimensional elasticity problems. Numerical calculations also show that when extremely skewed and coarse meshes and nearly incompressible materials are used, the proposed mixed element can still possess excellent behaviour. The mixed formulation starts with introduction of a parallelepiped domain associated with the given general eight-node hexahedral element. Then, the assumed strain field at the nodal level is constructed via the Hu-Washizu variational principle for that associated parallelepiped domain. Finally, the assumed strain field at the nodal level of the given hexahedral element is established by using the field extrapolation technique, and then by using the trilinear shape functions the assumed strain field of the whole element domain is obtained. All matrices involved in establishing the element stiffness matrix can be evaluated analytically and expressed explicitly; however, a 24 by 24 matrix has to be inverted to construct the displacement extrapolation matrix. The proposed hexahedral element satisfies the patch test as long as the element with a shape of parallelepiped.