• 한국광학회지
• /
• 제14권6호
• /
• pp.649-656
• /
• 2003

본 논문에서는 몸체진동형 링레이저 자이로에서 레이저 공진기에 인가되는 입력 각속도가 lock-in 영역에 있을 때 발생하는 맥놀이신호 위상오차의 크기는 맥놀이신호의 위상에 관계된다는 것을 수치해석적인 계산을 통하여 확인하였다. 그리고 그 오차가 누적되지 않고 통계적 평균값이 영이 되도록 하기 위하여 몸체진동의 진폭을 변화시키는 몸체진동잡음 인가방식에 대한 요구조건을 연구하였다. 그 결과 몸체진동잡음에는 진폭을 증가시키고 감소시키는 진폭경사가 필요하고 여기에 유사 백색잡음을 첨가해주어야 하며 진폭경사의 기울기 및 진폭의 최대값과 최소값을 불규칙적으로 변화시켜야 됨을 알 수 있었다. 그리고 이러한 조건을 만족하는 것과 그렇지 않은 몸체진동잡음을 이용하여 자이로를 동작시키면서 주변온도의 변화에 의하여 나타나는 출력변화를 비교함으로서 몸체진동잡음에 의하여 오차가 누적되는 특성을 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제12권11호
• /
• pp.1065-1073
• /
• 2006

In this paper we confirm the relation between the phases and phase errors of the beat signal at the lock-in region of the amplitude modulation type ring laser gyroscope by numerical calculation. Based on this facts, we, numerically, study the envelopes and magnitudes of the dither noise for statistically summing out the beat signal phase error, and we, experimently, confirm these numerical results. As a result, we find that the dither noise requires the increase gradient and the decrease gradient of the dither amplitudes, and those gradients should be combined with white noise. The magnitude of the dither noise which is satisfied with these requirements should be more than 5 percents of the average dither amplitude.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.71-72
• /
• 2007

대역 제한된 DS/SS 시스템의 상관 함수는 최고 값이 나타나는 시점과 함께 이른 또는 늦은 상관시간 옵셋 영역에서 극소 또는 극대로 나타나는 시점을 특징점으로 갖는다. 이 가운데 이른 상관시간옵셋 영역의 상관 함수는 다중경로 신호에 의해 덜 왜곡되기 때문에 이 영역의 상관 함수를 이용해 부호 동기를 추적하여 유지할 수 있다면 EL-DLL (delay lock loop with early minus late discriminator) 보다 추적편이를 줄일 수 있다. 본 논문에 이런 특성을 이용하는 추적편이 완화 기법을 제안하고, 모의실험을 통해 성능을 알아본다.

• Wind and Structures
• /
• 제34권1호
• /
• pp.81-90
• /
• 2022

To better understand the vortex-induced vibration (VIV) characteristics of a 5:1 rectangular cylinder, the distribution of aerodynamic force and the non-dimensional power spectral density (PSD) of fluctuating pressure on the side surface were studied in different VIV development stages, and their differences in the stationary state and vibration stages were analyzed. The spanwise and streamwise correlations of surface pressures were studied, and the flow field structure partitions on the side surface were defined based on the streamwise correlation analysis. The results show that the variation tendencies of mean and root mean square (RMS) pressure coefficients are similar in different VIV development stages. The RMS values during amplitude growth are larger than those at peak amplitude, and the smallest RMS values are observed in the stationary state. The spanwise correlation coefficients of aerodynamic lifts increase with increase of the peak amplitude. However, for the lock-in region, the maximum spanwise correlation coefficient for aerodynamic lifts occurs in the VIV rising stage rather than in the peak amplitude stage, probably due to the interaction of vortex shedding force (VSF) and self-excited force (SEF). The streamwise correlation results show that the demarcation point positions between the recirculation region and the main vortex region remain almost constant in different VIV development stages, and the reattachment points gradually move to the tailing edge with increasing amplitude. This study provides a reference to estimate the demarcation point and reattachment point positions through streamwise correlation and phase angle analysis from wind tunnel tests.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제26권9호
• /
• pp.1061-1072
• /
• 1999

한 개 이상의 사이트에 공간 데이타가 중복 저장된 분산 공간 DB에서, 동시에 수행될 수 있는 긴 트랜잭션의 변경은 일관성 제어를 위해 다른 사이트에 전파되어야 한다. 이때 같은 영역의 공간 데이타를 서로 다른 사이트에서 동시에 변경할 경우, 변경 상충 문제가 발생하거나 잠금 기법에 의한 오랜 대기 시간이 초래되는 문제가 있다. 또한 공간 객체는 잠금의 대상이 아닌 공간 관련성에 의한 종속성을 가진다.이 논문은 긴 트랜잭션으로 중복된 공간 데이타를 변경할 경우 중복 제어를 위한 변경 전파와 동시성 제어 문제를 다룬다. 중복된 공간 데이타의 변경 병렬성을 향상시키기 위해 영역 잠금 및 SR-bound WRITE 잠금 기법을 제시한다. 한 사이트에서 수정하는 객체들과 다른 사이트에서 수정하는 객체들 사이에 공간 관련성에 의한 종속성이 없을 경우 병렬 수정을 허용하도록 제어하며, 공간 관련성에 의한 종속성이 있을 경우 SR-based 2PC라 불리는, 확장된 2단계 완료 프로토콜로 협동작업을 수행해서 변경 상충을 해결하는 새로운 중복 제어 기법을 설계하고 구현한다.Abstract The update of a long transaction should be propagated to the other sites for consistency control, when spatial database are replicated at multiple sites to achieve availability, reliability, and performance. When the replicated spatial data are updated at the same time, the update of one site would be conflicted with the other or a user would not be able to access the replicated spatial data under the control of locking. Two spatial objects having spatial relationships should be cooperatively updated even if there are no conflicts of locking for them.This paper deals with the issues of concurrency control and update propagation of replicated spatial data. We present the concept of region lock and SR-bound WRITE lock for enhancing the parallelism of updating the replicated spatial data. If there are no spatial relationships between one site's objets and the other's objects, parallel update would be allowed. Concurrent update of two spatial objects having spatial relationships should be propagated and cooperated by using an extended two-phase commit protocol, called spatial relationship-based 2PC.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권5호
• /
• pp.476-482
• /
• 1996

The multi-dielectric layer SiO$_{2}$/Si$_{3}$N$_{4}$/SiO$_{2}$(ONO) is used to improve electrical capacitance and to scale down the memory device. In this paper, improvement of the capacitance by reducing the bottom oxide thickness in the nitride deposition with load lock(L/L) vacuum system is studied. Bottom oxide thickness under the nitride layer is measured by ellipsometer both in L/L and non-L/L systems. Both results are in the range of 3-10.angs. and 10-15.angs., respectively, independent of the nitride and top oxide thickness. Effective thickness and cell capacitance for SONOS capacitor are in the range of 50-52.angs. and 35-37fF respectively in the case of nitride 70.angs. in L/L vacuum system. Compared with non-L/L system, the bottom oxide thickness in the case of L/L system decreases while cell capacitance increases about 4 fF. The results obtained in this study are also applicable to ONO scaling in the thin bottom oxide region of memory stacked capacitor.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.149-154
• /
• 2007

This study examines the effect of acoustic excitation using forced coaxial air on the flame characteristics of turbulent hydrogen nonpremixed flames. A resonance frequency was selected to acoustically excite the coaxial air jet due to its ability to effectively amplify the acoustic amplitude and reduce flame length and NOx emissions. Acoustic excitation causes the flame length to decrease by 15 % and consequently, a 25 % reduction in EINOx is achieved, compared to a flame without acoustic excitation. Moreover, acoustic excitation induces periodical fluctuation of the coaxial air velocity, thus resulting in slight fluctuation of the fuel velocity. From phase-lock PIV and OH PLIF measurement, the local flow properties at the flame surface were investigated under acoustic forcing. During flame-vortex interaction in the near field region, the entrainment velocity and the flame surface area increased locally near the vortex. This increase in flame surface area and entrainment velocity is believed to be a crucial factor in reducing flame length and NOx emission in coaxial jet flames with acoustic excitation. Local flame extinction occurred frequently when subjected to an excessive strain rate, indicating that intense mass transfer of fuel and air occurs radially inward at the flame surface.

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.918-924
• /
• 2020

Film boiling is of great importance in nuclear safety as it directly influences the integrity of nuclear fuel in case of accidents involving loss of coolant. Recently, nuclear power plant safety under earthquake conditions has received much attention. However, to the best of our knowledge, there are no existing studies reporting film boiling in an oscillating system. Most previous studies for film boiling were performed on stationary systems. In this study, numerical simulations were performed for saturated film boiling of water on a horizontal surface under low frequencies to investigate the effect of system oscillation on film boiling heat transfer. A coupled level-set and volume-of-fluid method was used to track the interface between the vapor and liquid phases. With a fixed oscillation amplitude, overall, heat transfer decreases with oscillation frequency. However, there is a frequency region in which heat transfer remains nearly constant. This lock-on phenomenon occurs when the oscillation frequency is near the natural bubble release frequency. With a fixed oscillation frequency, heat transfer decreases with oscillation amplitude. With a fixed maximum amplitude of the additional gravity, heat transfer is affected little by the combination of oscillation amplitude and frequency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권11호
• /
• pp.5624-5638
• /
• 2016

A novel method based on Surf points is proposed to detect and lock-track single ground target in aerial videos. Videos captured by moving cameras contain complex motions, which bring difficulty in moving object detection. Our approach contains three parts: moving target template detection, search area estimation and target tracking. Global motion estimation and compensation are first made by grids-sampling Surf points selecting and matching. And then, the single ground target is detected by joint spatial-temporal information processing. The temporal process is made by calculating difference between compensated reference and current image and the spatial process is implementing morphological operations and adaptive binarization. The second part improves KALMAN filter with surf points scale information to predict target position and search area adaptively. Lastly, the local Surf points of target template are matched in this search region to realize target tracking. The long-term tracking is updated following target scaling, occlusion and large deformation. Experimental results show that the algorithm can correctly detect small moving target in dynamic scenes with complex motions. It is robust to vehicle dithering and target scale changing, rotation, especially partial occlusion or temporal complete occlusion. Comparing with traditional algorithms, our method enables real time operation, processing $520{\times}390$ frames at around 15fps.

• 한국통신학회논문지
• /
• 제22권4호
• /
• pp.662-674
• /
• 1997

In order to post process the vector-quantized images employing the theory of projections onto convex sets or the constrained minimization technique, the the projector onto QCS(quantization constraint set) as well as the filter that smoothes the lock boundaries should be investigated theoretically. The basic idea behind the projection onto QCS is to prevent the processed data from diverging from the original quantization region in order to reduce the blurring artifacts caused by a filtering operation. However, since the Voronoi regions in order to reduce the blurring artifacts caused by a filtering operation. However, since the Voronoi regions in the vector quantization are arbitrarilly shaped unless the vector quantization has a structural code book, the implementation of the projection onto QCS is very complicate. This paper mathematically analyzes the projection onto QCS from the viewpoit of minimizing the mean square error. Through the analysis, it has been revealed that the projection onto a subset of the QCS yields lower distortion than the projection onto QCS does. Searching for an optimal constraint set is not easy and the operation of the projector is complicate, since the shape of optimal constraint set is dependent on the statistical characteristics between the filtered and original images. Therefore, we proposed a hyper-cube as a constraint set that enables a simple projection. It sill be also shown that a proper filtering technique followed by the projection onto the hyper-cube can reduce the quantization distortion by theory and experiment.