• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.559-562
• /
• 2008

In this paper we propose a lock-in detection method for portable sensor systems and demonstrate with the portable detection module that has high sensitivity and robustness against the noise. The simple portable sensor module is manufactured using MCU(Micro Contorl Unit), OPAMP, MOSFET and a pair of infrared sensor. Manufactured sensor module is testified in the noisy environment caused by an external light and an white noise source. Without any type of band pass filters, we recover a signal of 33 $mV_{p-p}$ in 80 $mV_{p-p}$ white noise and get the DR(Dynamic Reserve) of 14 dB.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2E
• /
• pp.60-68
• /
• 1996

In this paper, we implement the door lock system based on pattern matching technique for speaker recognition using DTW. In this study, major features of our system are summarized as follows:(1) Make the average reference pattern using DTW. This method keeps the high recognition rate compared with the other systems whose performances degrade rapidly as time goes on. (2) Use F-ratio values of the cepstral coefficients. We find that the weighted cepstral reveals an effect on intensifying the difference between th customer and the imposter. The system hardware is composed of two parts : the door lock part and the speaker recognition processing part. We use an 8051 microprocessor in the door lock park for serial communication with host processor to open or close the lock. Using our system, we obtain speaker recognition rate of about 99.5%.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.81-90
• /
• 1995

Anti-lock Brake System has been developed to reduce tendency for wheel lock and improve vehicle control during sudden braking on slippery road surfaces. This is achieved by controlling the braking pressure avoiding wheel lock, while retaining handling and brake performance. This paper is concerned about characteristics of a solenoid valve in hydraulic modulator for controlling brake pressure. First, it was modeling the electromagnet by the permeance method. Second, it was modeling the commercial Maxwell poackage program. And then, a experiment was performed in order to justify modeling. The result of modeling coincided with teh result of experiment and commercial packabe program. As a result, these modelings will be able to use in analysis of dynamic character- istics of the solenoid valve for braking.

• Composites Research
• /
• v.25 no.6
• /
• pp.236-240
• /
• 2012

The purpose of this study was to investigate the feasibility on the detection of dental composite delamination using a lock-in thermography method. Amplitude and phase images of detected thermal signals were analyzed according to the lock-in frequencies. At a lock-in frequency of 0.05 Hz, the ligament thickness of 0.5 mm in the specimen exhibited the highest amplitude contrast between defective area and sound area. For ligament thicknesses of 1 mm and 1.5 mm, delamination detection was possible at 0.025 Hz and 0.01 Hz through the amplitude differences. At lock-in frequencies of 0.006 Hz and 0.01 Hz, ligament thickness 0.5 mm exhibited the highest phase contrast. For ligament thicknesses of 1 mm and 1.5 mm, the phase contrast exhibited possible detection of delamination at 0.006-0.1 Hz.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.323-327
• /
• 2008

We investigated the quench characteristics of a flux-lock type superconducting fault current limiter (SFCL) depending on the methods of the serial and parallel connections between the superconducting elements. The flux-lock type SFCL consists of two coils. The primary coil is wound in parallel to the secondary coil through an iron core, and the secondary coil is connected to the superconducting elements in series and parallel. In this paper, the analyses of voltage, current, and resistance of the superconducting elements connected in serial and parallel were performed to increase the power capacity of the flux-lock type SFCL. A part of the superconducting elements was not quenched in $2{\times}2$ serial connection between the elements and then the power burden of the quenched elements was increased. However the elements with $2{\times}2$ parallel connection was all quenched. This means that the power burden of each superconducting element can be reduced under the same conditions. We found that $2{\times}2$ parallel connection was more profitable for the current limiting effects and the increase of the power capacity.

• Journal of Korean Medical classics
• /
• v.26 no.4
• /
• pp.95-103
• /
• 2013

Objective : I would like to study the relationship between the theory of 'Lock, Door and Axis' with the principal of following to the 'Tip, Root and Middle qi' in Huang-Di-Nei-Jing. It can be analysed from the relativeness among the sentences to appearing in Shang-Han-Lun. And consider the theoretical relationship of the two books. Method : First, I search out the exact meaning of 'Lock, Door and Axis' theory. Second, The principal of following to the 'Tip, Root and Middle qi' is closely associated with 'Lock, Door and Axis' theory. Third, I would like to prove that the several sentence in the Shang-Han-Lun are closely related to the Huang-Di-Nei-Jing. Result : Zhang Zhong-jing's Shang-Han-Lun quote a theoretical basis in the Huang-Di-Nei-Jing. Furthermore, it extensively quote to explan a disease and treatment, and so on. Conclusion : It is necessary to study hard the Huang-Di-Nei-Jing for understand clearly the sentences of Shang-Han-Lun. I think that Huang-Di-Nei-Jing have a decisive effect on the Zhang Zhong-jing's thinking to the disease and his medical theory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1313-1321
• /
• 1999

The two-phase locking protocol(2PL) is the most widely-used concurrency control mechanism for guaranteeing logical consistency of data in a database environment where a number of transactions perform concurrently. The problem inherent in the 2PL protocol is a deadlock, where a set of transactions holding some locks indefinitely wait an additional lock that is already held by other transactions in the set. The deadlock detector is a DBMS sub-component that examines periodically whether a system is in a deadlock state based on lock waiting information of transactions. The deadlock detector and transactions execute concurrently in a DBMS and read and/or write the lock waiting information simultaneously. Since the lock waiting information is a shared one, we need an efficient method guaranteeing its physical consistency by using mutual exclusion. The efficiency of the mutual exclusion method is crucial especially in a main memory DBMS with high performance since it seriously affects the performance of an entire system. In this paper, we propose a new method that effectively guarantees physical consistency of lock waiting information. Two primary goals of our method are to minimize the processing overhead and to maximize system concurrency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1541-1546
• /
• 2013

The stress concentration of lock-claws, which are one of the important parts for pneumatic fitting for a flexible tube connection, was investigated by finite element simulation. In this study, the generation of the local plastic deformation was predicted when the tube was hooked up to a pneumatic fitting in order to disperse the stress concentration, and design optimization was carried out using the Taguchi method. For the optimization, the outer width, bending angle, and inner radius of the lock-claws are used as main variables. As a result, their respective contribution ratios are revealed as 81.3%, 10.9%, and 1.5%. The ratio of the total stress distribution was improved by 4% compared with the initial design of the lock-claws.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.87-97
• /
• 2008

Modem anti-ship missiles employ complex and sophisticated guidance laws to hit the target and enhance their survivability by executing additional maneuvers. However, such maneuvers may cause the target to move out of the missile seeker's Field-Of-View (FOV). Maintaining seeker lock-on during an engagement is a critical factor for missile guidance. In this paper, a guidance law switching logic that maintains seeker lock-on and a simple guidance law that keeps the target look angle of the seeker constant is proposed. The proposed method can be used for the terminal homing phase, and can be switched from any kind of guidance laws if a proper switching condition is satisfied. The minimum and maximum flight time calculation method in consideration of the missile maneuver limit and the FOV of the seeker is also provided.

• Wind and Structures
• /
• v.5 no.6
• /
• pp.527-542
• /
• 2002

Wind-excited vibrations of slender structures can induce fatigue damage and cause structural failure without exceeding ultimate limit state. Unfortunately, the growing importance of this problem is coupled with an evident lack of simple calculation criteria. This paper proposes a mathematical method for evaluating the crosswind fatigue of slender vertical structures, which represents the dual formulation of a parallel method that the authors recently developed with regard to alongwind vibrations. It takes into account the probability distribution of the mean wind velocity at the structural site. The aerodynamic crosswind actions on the stationary structure are caused by the vortex shedding and by the lateral turbulence, both schematised by spectral models. The structural response in the small displacement regime is expressed in closed form by considering only the contribution of the first vibration mode. The stress cycle counting is based on a probabilistic method for narrow-band processes and leads to analytical formulae of the stress cycles histogram, of the accumulated damage and of the fatigue life. The extension of this procedure to take into account aeroelastic vibrations due to lock-in is carried out by means of ESDU method. The examples point out the great importance of vortex shedding and especially of lock-in concerning fatigue.