• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.3
• /
• pp.8-16
• /
• 1999

This paper describes a VLSI design of Reed-Solomon(RS) decoder using the modified Euclid algorithm, with the main theme focused on the $\textit{GF}(2^8)$. To get area-efficient design, a number of new architectures have been devised with maximal register and Euclidean ALU unit sharing. One ALU is shared to replace 18 ALUs which computes an error locator polynomial and an error evaluation polynomial. Also, 18 registers are shared to replace 24 registers which stores coefficients of those polynomials. The validity and efficiency of the proposed architecture have been verified by simulation and by FLEX$^TM$ FPGA implementation in hardware description language VHDL. The proposed Reed-Solomon decoder, which has the capability of decoding RS(208,192,17) and RS(182,172,11) for Digital Versatile Disc(DVD), has been designed by using O.6$\mu\textrm{m}$ CMOS TLM Compass$^TM$ technology library, which contains totally 17k gates with a core area of 2.299$\times$2.284 (5.25$\textrm{mm}^2$). The chip can run at 20MHz while the DVD requirement is 3.74MHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.170-178
• /
• 2004

In this work a high speed 8-error correcting Reed-Solomon decoder is designed using the modified Euclid algorithm. Decoding algorithm of Reed-Solomon codes consists of four steps, those are, compute syndromes, find error-location polynomials, decide error-locations, and determine error values. The decoding speed is increased and the latency is reduced by using the parallel architecture in the syndrome generator and a faster clock speed in the modified Euclid algorithm block. In addition. the error locator polynomial in Chien search block is separated into even and odd terms to increase the overall speed of the decoder. All the functionalities of the decoder are verified first through C++ programs. Verilog is used for hardware description, and then the decoder is synthesized with a $.25{\mu}m$ CMOS TML library. The functionalities of the chip is also verified through test vectors. The clock speed of the chip is 250MHz, and the maximum data rate is 1Gbps.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.1031-1033
• /
• 2013

Radiation protection, as well as finding the location of the radiation source, such as the Fukushima radiation leak accident, it is important for the early and safe disposal of nuclear accident. The three-dimensional position of the radiation source detection distance of the radiation source can provide additional information to the existing radiation detectors radiation of a two-dimensional position detection function and then it can play a decisive role in the radiation contaminant removal and decontamination work. In this research, three-dimensional semiconductor sensor based on dual radiation detectors radiation source device visible part of the research and development of efficient radiation sensor unit on the design of the shielding structure.The lightweight, high-efficiency radiation source locator implementation was attempted for the structure and thickness of the shielding and collimator to perform the simulation of the radiation shielding for the various parameters of the shape model through design the optimal structure of the MCNP-based heavy-duty tungsten shielding, lead shielding The results of this study, is a compact, lightweight three-dimensional radiation source detection and future of silicon - based sensors will be used in the study.

• Journal of KIISE:Information Networking
• /
• v.32 no.6
• /
• pp.716-722
• /
• 2005

In the m, syntactically different URLs could represent the same resource. The URL normalization is a process that transform a URL, syntactically different and represent the same resource, into canonical form. There are on-going efforts to define standard URL normalization. The standard URL normalization designed to minimize false negative while strictly avoiding false positive. This paper considers the four URL normalization issues beyond ones specified in the standard URL normalization. The idea behind our work is that in the URL normalization we want to minimize false negatives further while allowing false positives in a limited level. Two metrics are defined to analyze the effect of each step in the URL normalization. Over 170 million URLs that were collected in the real web pages, we did an experiment, and interesting statistical results are reported in this paper.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.347-357
• /
• 1997

An accurate working length is an essential factor in the success of endodontic treatment. There are several methods for determining working length; electronic apex locator, tactile sense by clinician, and radiography. Among these methods, the most commonly used method is radiography. But this method requires excessive radiation, long developing time, and many equipments. In additon, it could give an image distortion and two dimensional image. To improve these disadvantages, an intraoral digital radiographic system (Digora$^{(R)}$) which use an imaging plate instead of a film, was developed. The purpose of this investigation was to compare Digora imaging with conventional radiography in determining the working length. Maxillary first or second molars of human dried skull were used. Files were inserted into canals at randomly selected lengths, from 2mm short of the radiographic apex to 2rnm beyond. Radiographs and Digora images(Digora positive and Digora negative) were evaluated to determine the adjustment needed to place the file 0.5mm from the radiographic apex. The results were as follows ; 1. There was no significant difference in accuracy between those evaluated in ${\pm}0.5mm$ and those accurately evaluated in the 3 images. 2. When comparing the accuracy of each image without distinguishing the 3 images, in the group accurately determined within ${\pm}0.5mm$, the mesiobuccal group showed significantly higher accuracy compared to the palatal group(p<0.05).

• Journal of Digital Contents Society
• /
• v.19 no.5
• /
• pp.1011-1019
• /
• 2018

Existing exploration robot is able to control its speed using technologies such as the remote control and deep learning. However its speed control method using weather information has not been proposed. To overcome the problem of conventional methods without using the weather information which is an useful ordinary life information, this paper proposes a new speed control method of exploration robot using weather information gathered from RSS service which is offered without cost by the Meteorological Agency. The exploration robot implemented in this paper is controled by the remote control through the TCP/IP communication and provides real-time real spot figure gathered from its camera sensor within the range of WiFi. Additionally, according to the weather information from URL of the Meteorological Agency, the implemented exploration robot autonomously controls it speed. The correct performance of the proposed method is verified by the experimental measurement data of its speed according to the precipitation probability and wind speed in this paper.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.65.1-65.1
• /
• 2013

The 2011 August 09 Flare is one of the largest X-ray flares of Sunspot Cycle 24 to attract a lot of attention for its various activities detected in coronal images. In this study we concern ourselves mostly on information of high energy electrons produced during this flare provided by hard X ray data from the Reuven Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) and radio data from the Korean Solar Radio Burst Locator (KSRBL) and Ondrejov. EUV images obtained by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamic Observatory are used to provide the context of magnetic reconnection. In our results, (1) HXR spectra have a rich spectral morphology. Initially it could be fit by one thermal component (T~30MK) and one single power law nonthermal spectrum, but later a better fit could be made by introducing an additional thermal component (T~55 MK). (2) Time delays between the KSRBL burst and the RHESSI hard X-ray emission were found which are more obvious at low frequencies and insignificant at high frequencies. (3) The HXR source lies in the core of the quadrupolar active region. In our interpretation based on AIA 94 A images, the outer part of the active region erupted to be blown out, leaving the intense hard X-ray emission concentrated in the core. We relate the appearance of the second thermal component to the evolution of the AIA 171 and 94 A images. The time delays of microwave peaks to HXR peaks are interpreted as indicating presence of trapped electrons in larger closed magnetic loops. With these result we conclude that the hard X ray and microwaves are due to impulsive acceleration in the low and high heights and a sigmoidal reconnection scenario.

• Journal of Oral Medicine and Pain
• /
• v.19 no.1
• /
• pp.137-149
• /
• 1994

This study was performed to investigate the relationship between Forward Head Posture(FHP) and Craniomandlbular Disorders(CMDs). Many studies reported that there was some relationship between them, however, there is still controversy. So It Is necessary to observe and compare many more patients with CMDs wirh normal controls. For the study 85 patients with CMDs and 37 dental students were selected as experimentals and controls, respectively. And the experimentals were classified Into two groups, that is, TMJ internal derangement group and muscle disorders group according to clinical diagnosis. For measuring the FHP, CROM(Cervical-Range-of-Notion)was used. This goniometer is composed of three part. First, gravity goniometer for flexion and extension. Second, magnetic compass and yoke for rotational movement. And last, forward head arm and vertebra locator for forward head posture. Next T-Scan, electronic occlusal analyzer, was used for recording of occlusal contact state. Other items such as maximum opening, lateral excursion, Helkimo's anamnestic index, and muscle palpation point from Friction's craniomandibular index were checked clinically by one examiner. The result of this study were as follows : 1. In male, control group showed much more measurement in resting forward head posture than did experimental group. But there were not significant differences between groups in female subject. From this results, the author contended that CROM is new measuring system and differ from other goniometers in some aspect, so that results should be re-evaluated 2. Mean value of maximum mouth opening in nearly all groups were greater than 40mm. and mouth opening had a significant correlation with occlusal force and with anamnestic index both sex. 3. Mean value of palpation point had not any correlationship with forward head posture in both sex, but there was significant difference between upper and lower group by rounded shouldes. 4. In summary, there was no significant relationship between forward head posture and sign and symptom of Craniomandibular Disorders.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.246-256
• /
• 2020

In the future Network Centric Warfare(NCW), changing to IPv6 based network environment is required to enable various future technologies such as the Internet of Things(IoT) and cloud technology which are expected to be introduced to the tactical network evolution. With the change to the IPv6 network, an ID/LOC(Identifier/Location) separation protocol that decomposes context of the IP address to location and identifier can enhance network capacity of increasing number of device and provide efficient mobility management in the tactical network that changes topology dynamically. In this paper, we choose ILNP(Identifier-Locator Network Protocol) as an ID/LOC separation for tactical network environment. In addition to ILNP-based tactical network design, this paper proposes a network-based mobility management scheme for providing efficient mobility management. Through numerical performance analysis, we show that the proposed scheme can reduce network loads more effectively than the conventional IP-based mobility management scheme and common handover procedure in ILNP.

• Journal of Convergence Society for SMB
• /
• v.6 no.3
• /
• pp.43-48
• /
• 2016

Current address-based Internet has started to expose the number of limitations, with the growth of the Internet. Most of the problems have been solved by adding new features to the Internet or some modification of existing features but some problems can not be solved because it is believed that the structural limitations of the Internet. Overcoming to fundamentally the limitations of the Internet, ID-based Future Internet research is under active research going on in the competitive atmosphere of the United States and Europe. However, most studies have been promoted in a specific field is concentrated in a limited area. For the future Internet, there is a need to derive the requirements to overcome the limitation and accommodate the features and advantages of the existing studies. This paper compares and analyzes the characteristics and advantages and disadvantages for the ID-based Future Internet Research, and describes the requirements to have the ID-based Future Internet.