• Journal of The Geomorphological Association of Korea
• /
• v.25 no.2
• /
• pp.1-14
• /
• 2018

The main objective of this paper is to classify properties of the locational environment for each debris type by calculating likelihood ratio based on the correlation between the distributions for each type of debris landform. A total of 8 thematic maps, like as elevation, slope, aspect, curvature, topographic wetness index (TWI), soil drainage, geology, and landcover including with GIS spatial information generally used in this type of debris landform analysis. The results of this study showed that the block stream had a high likelihood ratio compared to talus in areas with relatively high elevation; and concerning slope, the block stream had a high likelihood ratio in a relatively low region than talus. Concerning aspect, a clear correlation could not be analyzed for each debristype, and concerning curvature, the block stream displayed a developed slope on the more concave valley than the talus. Analysis concerning TWI, the block stream displayed a higher likelihood ratio in wider sections than talus, and concerning soil drainage, the talus and block stream both displayed a high likelihood ratio in regions with well-drained soil. The talus displayed a high likelihood ratio in the order of metamorphic rocks, sedimentary rocks, and granite, while the block stream displayed a high likelihood ratio in the order of volcanic rocks, granite, and sedimentary rocks. In addition, concerning landcover, the likelihood ratio had the most concentrated distributed compared to natural bare land only concerning talus. Based on the likelihood ratio result, it can be used as basic data for extracting the possible areas of distribution for each debris type through the GIS spatial integration method.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.4
• /
• pp.438-457
• /
• 2019

The main purpose of this paper is to identify the entry types and locational determinants of North Korean workers in cross-border regions between North Korea and China. More specifically, the paper has attempted to divide the entry type of them in the regions into two; 1) entry via transactions between Chinese traders with North Korea and North Korea trade companies, and 2) entry via transactions between Korean-Chinese middlemen and North Korean trade companies. Also, it has analyzed main factors of their locational determinants in the spatial contexts of the regions. There have been changes in two perspectives in terms of the entry paths and types of them in accordance with the transformation of characteristics of United Nations sanction against North Korea from 'call-upon' to 'decide' after UN Security Council Resolution 2094 in 2013. Firstly, main agents who have dealing with North Korean trade companies which have right to dispatch North Korean workers have been changed from Chinese traders into Korean-Chinese brokers who are specialized in the introduction of North Korean workers with one-stop service from visa administrative to labor managements. Secondly, there has been a transfer of North Korean workers in the regions from formal to informal workers who has been admitted into China with a short stay or a tourist visa, and then remained illegally to be employed in China. Therefore, as demands on service which is able to guarantee the security of North Korean informal workers and their managements have increased, Korean-Chinese brokers have been stimulated in the regions after the operation of real international sanctions against overseas North Korean workers. In addition, the main factors of their locational determinants in cross-border regions between North Korea and China are could be analyzed in three perspectives; 1) an increase in real wages in accordance with the reform of the Chinese social insurance system after 2011, 2) the structural vulnerability of labor markets in the regions, 3) the utilization of stable and manageable workers.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.77-87
• /
• 2013

About 1,800 villages have released from Greenbelt since Greenbelt-reform-policy for readjustment of the area was promoted after 1997. Even though the government intended to attract planned development & improvement of these lifted villages through District Unit Plan and designating the lifted area as low-rise and low-density zoning considering the characteristics of the Greenbelt region, there are still many problems to be solved: a lack of funds, insufficient capability for self-improvement and unexecuted SOCs in long-term etc. It seems that these problems are caused by focusing on the lifting areas itself instead of researching deeply the condition and characteristics of the villages and searching proper direction/plans of improvement before lifting Greenbelt In addition, the existing plan of village improvement and management was not considering physical and spacial characteristics of the areas, social and economic situation of residents and relationship between the villages and surrounding cities, though these conditions are different among each villages, and the related regulations are applied uniformly across all the villages and those have been causing many civil appeals and environmental problems. In these respects, this study aims to consider the problems of the lifted villages using the existing researches on them and to make typology by characteristics-data of the villages and to establish improvement strategies of each types. In this study, the villages were classified into 5 types as a result of cluster analysis on 424 villages among all 1,800 through variables of locational potentiality : location, accessibility, size and form of village, condition of regulations etc. According to function of the villages, they were divided into 4 types: urban-type, rural-type, industrial-type and neighborhood-centered-type. This study also drew 4 improvement-strategy-types by combination of locational potentiality and village-function : type of improving life-environment, type of improving production-infra, type of inducing-planned-improvement and type of constructing center-of living-circle. Finally, this study suggested the directions of the each 4 types to desirable improvement and management which could be used to make and complement plans for village improvement.

• Journal of the Korean housing association
• /
• v.25 no.2
• /
• pp.1-9
• /
• 2014

This study investigates supply patterns and residential characteristics of the Urban-type Housing in Seoul. There have been 3,336 buildings and 71,790 housing units approved until the end of 2012. One-room apartments and small units less than 30 $m^2$ of residential area amount to 81% and 82% of total units, respectively. Major findings are as follows. First, single- and two-person households less than 30 years of age are mostly lived in the housing. Respondents are mainly professional and white-collar (43%) and service and sales workers (27%). Most of them are mid-income classes (67%), which is twice more than that of single- and two-person households in Seoul. They pay 672 thousand won in rent more than average rent of mid-income class. The rent to income ratios are 29.9% for single households and 24.5% for two-person households, which are higher than that of mid-income bracket. Third, their satisfaction level is relatively high in internal environment and access to public service facilities, but not in external environment and community service facilities. They are satisfied with security and daylight, walking and safety, access to public transport and parking space, but not with noise and vibration, natural environment, access to park and cultural and sports facilities, and most community service facilities. It is necessary to reexamine the articles of deregulation and prepare design standards while considering different housing and locational types.

• Journal of the Korean Institute of Rural Architecture
• /
• v.19 no.3
• /
• pp.43-51
• /
• 2017

This study is to analyze establishment status and planning characteristics of the landscape master plan of 22 cities and counties in Jeollanam-do, Korea. The landscape master plans have been established in 19 cities and counties and among them they were established in 11 cities and counties before 2010. They tend to be made in city governments earlier than county governments. Community visions are implied with four meanings, 'landscape ecological', 'administrative economic', 'historical cultural', 'abstraction sensitive' in expression. For setting zones, axises, and bases of landscapes, characteristics of each landscape zone are emphasized with unification and connectivity of axises and bases of landscapes as one unit to local governments. Proposal of design principle or guideline of landscape by elements tend to be higher than landscape types. Locational characteristics of local governments have influenced to landscape types and characteristics of natural environments have been strongly reflected in landscape plan in particular.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.15-26
• /
• 1994

To understand the relative contribution of varietal and environmental variation on various grain quality components in rice, grain appearance, milling recovery, several physicochemical properties of rice grain and texture or palatability of cooked rice for milled rice materials of seven cultivars(five japonica & two Tongil-type), produced at six locations of the middle and southern plain area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal variations were detected in all grain quality components of the rice materials and marked locational variations with about 14-54% portion of total variation were recognized in grain appearance, milling recovery, alkali digestibility, protein content, K /Mg ratio, gelatinization temperature, breakdown and setback viscosities. Variations of variety x location interaction were especially large in overall palatability score of cooked rice and consistency or set- back viscosities of amylograph. Tongil-type cultivars showed poor marketing quality, lower milling recovery, slightly lower alkali digestibility and amylose content, a little higher protein content and K /Mg ratio, relatively higher peak, breakdown and consistency viscosities, significantly lower setback viscosity, and more undesirable palatability of cooked rice compared with japonica rices. The japonica rice varieties possessing good palatability of cooked rice were slightly low in protein content and a little high in K /Mg ratio and stickiness /hardness ratio of cooked rice. Rice 1000-kernel weight was significantly heavier in rice materials produced in Iri lowland compared with other locations. Milling recovery from rough to brown rice and ripening quality were lowest in Milyang late-planted rice while highest in Iri lowland and Gyehwa reclaimed-land rice. Amylose content of milled rice was about 1% lower in Gyehwa rice compared with other locations. Protein content of polished rice was about 1% lower in rice materials of middle plain area than those of southern plain regions. K/Mg ratio of milled rice was lowest in Iri rice while highest in Milyang rice. Alkali digestibility was highest in Milyang rice while lowest in Honam plain rice, but the temperature of gelatinization initiation of rice flour in amylograph was lowest in Suwon and Iri rices while highest in Milyang rice. Breakdown viscosity was lowest in Milyang rice and next lower in Ichon lowland rice while highest in Gyehwa and Iri rices, and setback viscosity was the contrary tendency. The stickiness/hardness ratio of cooked rice was slightly lower in southern-plain rices than in middle-plain ones, and the palatability of cooked rice was best in Namyang reclaimed-land rice and next better with the order of Suwon$\geq$Iri$\geq$Ichon$\geq$Gyehwa$\geq$Milyang rices. The rice materials can be classified genotypically into two ecotypes of japonica and Tongil-type rice groups, and environmentally into three regions of Milyang, middle and Honam lowland by the distribution on the plane of 1st and 2nd principal components contracted from eleven grain quality properties closely associated with palatability of cooked rice by principal component analysis.

• Journal of the Korean Geographical Society
• /
• v.43 no.3
• /
• pp.432-447
• /
• 2008

This study is to examine and analyze the the connection types between location knowledge and understanding the characteristics of world regions which 8th grade students are recognizing. In the analysis of the relation between the location knowledge and region understanding(clothing, food, housing and living style and so on), I analyzed the relation types between location knowledge and region living figures. Absolutely understanding the region needed the efact location knowledge on the world map, the knowledge of the longitude and latitude, symbolic area and the higher ranking region and the information about natural surroundings in which I grasp the region living figures. In addition, it needed the knowledge of locational attributes for the connection formation between region location knowledge on maps and understanding the region. The relative location knowledge related to the other regions and those natural surroundings and the linkage of those region locational attributes are needed in order that the location knowledge on a map could be connected to the knowledge about the actual region living figures. So I call it 'the structured location knowledge'. In order to form the structured location knowledge, the location knowledge of region on a map have to be connected to the multiple knowledge about absolute and relative locations with the knowledge of diverse location attributes. Therefore, it would be necessary that the location teaming for getting the characteristics of region have to be systematically accomplished departments of location-climate$^{\circ}{\mathbb{S}}$geographical features-region living figures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.164-172
• /
• 1983

The present study was conducted to investigate the variations in morphological traits, yield and yield-related components of rice cultivars exposed to different weather conditions by growing at the locations with different altitude but with equal latitude. Three Japonica varieties (Daegoldo, Jinheung, Shin #2) and three Tongil type semi-dwarf varieties(Josaengtongil, Suweon 287, wx 817-65-2-3) were seeded at Suweon on April 21 and transplanted at Suweon ($127^{\circ}$ N37 20', altitude 37m) and Jechun ($128.2^{\circ}$, N37 10', altitude 280-300m) on June 1 with the spacing of 30 $\times$ 15 em. The morphological traits, yield and yield-related components were measured. Culm length, paincle length and 1000-grain weight showed a little increase in Japonica varieties in Jechun as compared to those in Suweon and vice versa in semi-dwarf varieties, showing no significant differences. Number of panicles, per hill and number of spikelets per panicle among yield-related components showed remarkable increase in all varieties in Jechun as compared to those in 'Suweon but such inter-locational differences differed with varieties within varietal group and between varietal groups. On the contrary, grain fertility was higher in Suweon than that in Jechun and in Japonica varieties than that in semi-dwarf varieites , showing greater inter-locational difference in semi-dwarf varieties. Among Japonica varieties Jinheung and Shin #2 showed remarkable increase in yield in Jechun as compared to that in Suweon but in semidwarf varieties it was just the opposite. The importance of each of the yield-related component contributing to yield showed similar tendency 'regardless of locations in Japonica varieties. However, it was evidently different between locations in semidwarf varieties, where number of spikelets per panicle showed greatest direct effect on yield in Suweon but in Jechun so did grain fertility followed by the number of spikelets per panicle.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.847-854
• /
• 2012

The demand for noise barriers and necessity for the installation are highly growing because residential areas have become diverse and locational priority is changed to consider how to approach highway easily. However, public annoyance to the noise generated from highway is continued despite lots of noise barrier are installed. Moreover, there are growing concerns to maintain noise barriers to be free from losing transparency, dust stack, and shock fracture. To resolve these issues, it is suggested to develop new polymer materials and conceptually new noise barrier. In this study, as a first step to develop a new noise barrier to overcome current technological challenges as well as economic issues, recent research trends have been analyzed and found the direction for the future research in terms of material, supplementary function, and patterning.

• Journal of the Korean association of regional geographers
• /
• v.6 no.1
• /
• pp.1-28
• /
• 2000

The purpose of this study is to clarify the suburbanization of manufacturing, and location and linkages of decentralized manufacturing from Metropolitan Pusan by means of case study on manufacturing location and linkages in the suburb of Metropolitan Pusan. Kimhae city and Yangsan-Gun toward which heavy decentralization of manufacturing from the Metropolitan Pusan has been done. Both hard data and soft data were used as the basic data. Hard data are the statistical data in statistical yearbooks and firm list in directories. The former consists of the number of establishments and employees classified by product type, firm size and unit area. The latter consists of owner's names, addresses, employee number, products and headquarters of firms. Soft data are the results of the interviews with the 242 owners of firms in the four case study areas selected by Proportional Stratified Sampling Method. The major findings are as follows: 1. The spatial variations of manufacturing in the suburb was regularized in the latter half of 1970's. The primary processes to decentralize manufacturing from Metropolitan Pusan were the birth, relocation and establishment of branches of the firms. Among them the relocation of small outer-oriented single-location firms from Pusan was the most important. 2. The spatial variations undergoing spatial expansion of manufacturing distribution and increase of agglomeration degree of manufacturing, proceeded from the adjacents of Metropolitan Pusan to the outer areas along the main transportation route. 3. The main factors which caused manufacturing to decentralize from the Metropolitan Pusan were firm policy and land for this policy. The main locational factors which induced the decentralizing manufacturing into the suburb were land, market and transportation. 4. The strength of linkages with the outside of the study area is stronger than that of linkages with the inside. There is distance-decay-function in the strength of linkages with the outside, and linkages with short distant areas are stronger than those with long distant areas. 5. The ranges of spatial linkages in procurement of materials, in subcontraction and in marketing are wider than those in ordering. 6. The main factors which cause the formation of linkages are different by types of linkages: monopolistic and oligopolistic supply are important in procurement linkages; characteristics of products and the subsequent marketing difficulties, in subcontraction linkages; fluctuation, cost reduction, insufficient facility and characteristics of products, in ordering linkages; subcontract, characteristics of product and the subsequent marketing difficulties, in marketing linkages. 7. The changes of linkages owing to locational changes of firms were great, and were greater in long distant areas than in short distant areas. 8. The main factor influencing on the changes of linkages was the easiness in the transportation of goods, movement of labour and contacts with customers. In conclusion, some facts described above were proved to be consistent with the results of proceeding studies in the other areas: influence of relocation of decentralizing firms on the suburbanization; the factors of manufacturing decentralization; spatial characteristics of linkages; linkage changes owing to relocation of firms. Some were proved to be partly consistent: locational factors inducing decentralized manufacturing into the suburb were proved to be inconsistent. I think that the results of previous studies on the other areas can be applicable to the explanation on the decentralization of Metropolitan manufacturing from the viewpoint of the suburb. For the better explanation on the decentralization of Metropolitan manufacturing, more empirical case studies on the suburbanization of manufacturing are necessary.