• Journal of the Korea Society of Computer and Information
• /
• v.18 no.2
• /
• pp.77-85
• /
• 2013

Recently, location information based routing protocol has been studied to estimate end-to-end path in wireless ad-hoc network. This protocol assumes all nodes can get heir location information via GPS devices and floods only limited area with routing message through acquired location information. Therefore, this protocol has advantage that can reduce the number of routing message than the existing IP-based routing protocols. In addition, all nodes enabling this protocol must acquire their own location information to participate in the location-based routing. However, recent because of the miniaturization of sensor node, sensor node without GPS function has been launched. Therefore in case of the sensor node that does not know location information, it is impossible to participate in the ad hoc network configuration and location information based routing. In this paper, a virtual location information based routing scheme is proposed for wireless nodes without GPS function to be able to participate in location information based routing within ad hoc network environments consisting of wireless nodes with GPS function and wireless nodes without GPS function. Therefore, the proposed protocol has the advantage that a wireless node without a GPS function is able to participate in ad hoc network configuration and the location information based routing.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.4
• /
• pp.21-35
• /
• 2007

In ad hoc networks, position-based routing schemes, that use geographical positions of nodes, have been proposed to efficiently route messages. In these routing schemes, the location service is one of the key elements that determines and effects security and efficiency of the protocol. In this paper, we define security threats of location service and propose a new quorum based location service protocol. In our proposed protocol, nodes register their public keys in other nodes during the initialization phase and these registered keys are used to verify locations of other nodes and the messages exchanged. In this paper, we prove that our protocol is robust against traditional attacks and new attacks that may occur due to the use of position-based routing. We also analyze the efficiency of our protocol using various simulations.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2010

Recently, wireless sensor networks(WSNs) technology has been considered as one of the most critical issues in the ubiquitous computing age. The sensor nodes have limited battery power, so they should consume low energy through their operation for the long-lasting lifetime. Therefore, it is essential to use energy efficient routing protocol. For this, we propose a location-based energy-efficient routing protocol which constructs the energy efficient route by considering the quantity of Energy consumed. In addition, we propose a route reconstruction algorithm to handle the disconnection of message transmission. Finally, we show from performance analysis using TOSSIM that our protocol outperforms the existing location based routing protocols in terms of energy efficiency.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.47-54
• /
• 2008

In order to realize Intelligent Transport System (ITS) without any road facilities support, Inter-vehicle Communication (IVC) is increased attention. IVC makes it possible to exchange real-time information among vehicles without centralized infrastructure. The IVC systems use multi-hop broadcast to disseminate information. In this paper, we propose the improved AODV routing protocol based on location information. The proposed AODV routing protocol transmits Hello packet with location information to calculate the distance between nodes. Then it achieves fast link recovery. We confirm the throughput performance of the proposed AODV routing protocol compared with the AODV routing protocol using Qualnet ver.3.8 simulator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.6
• /
• pp.1586-1605
• /
• 2012

With the prevalence of multimedia applications and the potential commercial usage of Mobile Ad hoc Networks (MANETs) in group communications, Quality of Service (QoS) support became a key requirement. Recently, some researchers studied QoS multicast issues in MANETs. Most of the existing QoS multicast routing protocols are designed with flat topology and small networks in mind. In this paper, we investigate the scalability problem of these routing protocols. In particular, a Position-Based QoS Multicast Routing Protocol (PBQMRP) has been developed. PBQMRP builds a source multicast tree guided by the geographic information of the mobile nodes, which helps in achieving more efficient multicast delivery. This protocol depends on the location information of the multicast members which is obtained using a location service algorithm. A virtual backbone structure has been proposed to perform this location service with minimum overhead and this structure is utilized to provide efficient packet transmissions in a dynamic mobile Ad hoc network environment. The performance of PBQMRP is evaluated by performing both quantitative analysis and extensive simulations. The results show that the used virtual clustering is very useful in improving scalability and outperforms other clustering schemes. Compared to On-Demand Multicast Routing Protocol (ODMRP), PBQMRP achieves competing packet delivery ratio and significantly lower control overhead.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.259-270
• /
• 2010

In this paper, a Location Information-based Gradient Routing (LIGR) algorithm is proposed for setting up routing path based on physical location information of sensor nodes in wireless ad-hoc networks. LIGR algorithm reduces the unnecessary data transmission time, route search time, and propagation delay time of packet by determining the transmission direction and search range through the gradient from the source node to sink node using the physical location information. In addition, the low battery nodes are supposed to have the second or third priority in case of forwarding node selection, which reduces the possibility of selecting the low battery nodes. As a result, the low battery node functions as host node rather than router in the wireless sensor networks. The LIGR protocol performed better than the Logical Grid Routing (LGR) protocol in the average receiving rate, delay time, the average residual energy, and the network processing ratio.

• Journal of Information Technology Services
• /
• v.6 no.1
• /
• pp.141-149
• /
• 2007

Sensor node's mobility brings new challenges to data dissemination in large sensor networks. Frequent location updates of sensor nodes can lead to both excessive drain of sensor's limited battery supply and increased collisions in wireless transmissions. Conventional studies for routing protocols in wireless sensor networks are not enough to cover energy consumption and migration of sensor nodes. This study proposes a dynamic routing protocol based on the SPIN considering energy consumption and the migration, and also shows the effectiveness of the proposed routing protocol.

• Journal of Computing Science and Engineering
• /
• v.2 no.4
• /
• pp.412-427
• /
• 2008

We propose ID-exchange protocol for Connectionless Location-Awareness Service (CLAS) to locate mobile nodes in indoor sensor network. When adapting location-awareness service to sensor network, the target system must be designed in accordance with various metrics which reflect the system requirement. We especially consider sustainability of the existing service which has been provided for its original purpose, such as environmental monitoring. The detailed meaning of sustainability here is that, even if location-awareness service is newly added to the existing service, the system must be assured to retain a stable network condition, and to deal with newly caused traffic properly. The CLAS ID-exchange protocol is especially designed for fixture and mobile nodes communication to achieve these properties. The protocol operates on 802.15.4 MAC layer to make mobile node work independently of the procedure to build routing table of fixture node, so a stable routing condition can be achieved even if there are many mobile nodes. Moreover, the dedicated frequency channel is assigned only for this protocol, so that traffic caused by location-awareness service can be distributed to another channel. A real system adapting the protocol was implemented to monitor fire and authorities' positions. We verified the overhead and elapsed time for location-awareness. The result shows the proposed protocol has a high performance in detecting speed, traffic distribution, and stability of overall network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.4
• /
• pp.741-762
• /
• 2011

Recently, multicast routing protocols become increasingly important aspect in Mobile Ad hoc Networks (MANETs), as they effectively manage group communications. Meanwhile, multimedia and real-time applications are becoming essential need for users of MANET. Thus it is necessary to design efficient and effective Quality of Service (QoS) multicast routing strategies. In this paper, we address the scalability problem of multicast routing protocols to support QoS over MANETs. In particular, we introduce a Position-Based QoS Multicast Routing Protocol (PBQMRP). Basically, the protocol based on dividing the network area into virtual hexagonal cells. Then, the location information is exploited to perform efficient and scalable route discovery. In comparison with other existing QoS multicast routing protocols, PBQMRP incurs less control packets by eliminating network flooding behavior. Through simulation, the efficiency and scalability of PBQMRP are evaluated and compared with the well-known On-Demand Multicast Routing Protocol (ODMRP). Simulation results justify that our protocol has better performance, less control overhead and higher scalability.

• Journal of Information Processing Systems
• /
• v.1 no.1 s.1
• /
• pp.49-54
• /
• 2005

With the recent advances in Micro Electro Mechanical System (MEMS) technology, low cost and low power consumption wireless micro sensor nodes have become available. However, energy-efficient routing is one of the most important key technologies in wireless sensor networks as sensor nodes are highly energy-constrained. Therefore, many researchers have proposed routing protocols for sensor networks, especially cluster-based routing protocols, which have many advantages such as reduced control messages, bandwidth re-usability, and improved power control. Some protocols use information on the locations of sensor nodes to construct clusters efficiently. However, it is rare that all sensor nodes know their positions. In this article, we propose another cluster-based routing protocol for sensor networks. This protocol does not use information concerning the locations of sensor nodes, but uses the remaining energy of sensor networks and the desirable number of cluster heads according to the circumstances of the sensor networks. From performance simulation, we found that the proposed protocol shows better performance than the low-energy adaptive clustering hierarchy (LEACH).