• 산업경영시스템학회지
• /
• 제34권4호
• /
• pp.114-119
• /
• 2011

Process capability indices (PCls) have been widely used in manufacturing industries to provide a quantitative measure of process potential and performance. The previous studies have measured only one location on each part in the case of single variate. To calculate the reliable process capability, a couple of measuring locations on each part are required. In this paper, we propose a new system process capability index $SC_{pm}$ (m) which is the minimum value of the location PCls.

• The Korean Journal of Pain
• /
• 제7권2호
• /
• pp.170-174
• /
• 1994

Stellate Ganglion (SG) of l0 cadavers were removed during autopsy at Saga Medical College. Length, width, thickness, shape and location of SG were measured before formalin fixation. The results are as follows; 1) Length, width, thickness of SG were 22.33+5.23mm, 9.34+2.23mm and 5.03+1.19mm in right respectively, and 29.67+10.56 mm, 11.29+3.20mm and 5.51+1.09mm respectively in left. 2) Weight of right SG is 0.69+0.25 gm and weight of left SG is 1.04+0.63 gm. 3) Shape of SG is oval and snowman type. 4) Location of SG is variably located from the base of 7th cervical vertebra to first thoracic vertebra.

• 한국통신학회논문지
• /
• 제21권9호
• /
• pp.2402-2414
• /
• 1996

Registration is the process by which a base station gets the information of location and status about mobile stations. Registration will become an increasingly important issue in mobile cellular communications, especially in microcellular system with the increase of location updating traffic. Four typesof registration schemes, which are specified in US standard IS-95 and Korean standard TTA-KO-0062, power up registration scheme, power down registration scheme, distance based registration scheme and zone based registration scheme, will be mainly used in the future. In this paper, we derive the combined cost of signaling traffic of paging and registration for various parameters of mobile stations behavior(unencumbered call duration, power up and down rate, velocity, etc.) then we present numerical results for the perfroamnce of four registration schemes. The size of location area is provided for optimal operation.

• 전기전자학회논문지
• /
• 제20권1호
• /
• pp.1-8
• /
• 2016

In this paper, we propose an effective time-of-arrival (TOA)-based localization method with adaptive bias computation in indoor environments. The goal of the localization is to estimate an accurate target's location in wireless localization system. However, in indoor environments, non-line-of-sight (NLOS) errors block the signal propagation between target device and base station. The NLOS errors have significant effects on ranging between two devices for wireless localization. In TOA-based localization, finding the target's location inside the overlapped area in the TOA-circles is difficult. We present an effective localization method using compensated distance with adaptive bias computation. The proposed method is possible for the target's location to estimate an accurate location in the overlapped area using the measured distances with subtracted adaptive bias. Through localization experiments in indoor environments, estimation error is reduced comparing to the conventional localization methods.

• Imaging Science in Dentistry
• /
• 제45권1호
• /
• pp.67-72
• /
• 2015

Arrested pneumatization of the sphenoid sinus is a developmental variant that is not always well recognized and is often confused with other pathologies associated with the skull base. This report describes the case of a patient referred for cone-beam computed tomography (CBCT) imaging for dental implant therapy. CBCT demonstrated a well-defined incidental lesion in the left sphenoid sinus with soft tissue-like density and sclerotic borders with internal curvilinear opacifications. The differential diagnoses included intraosseous lipoma, arrested pneumatization of the sphenoid sinus, chondrosarcoma, chondroid chordoma, and ossifying fibroma. The radiographic diagnosis of arrested pneumatization was based on the location of the lesion, its well-defined nature, the presence of internal opacifications, and lack of expansion. Gray-scale CBCT imaging of the area demonstrated values similar to fatty tissue. This case highlighted the fact that benign developmental variants associated with the skull base share similar radiographic features with more serious pathological entities.

• 미생물학회지
• /
• 제31권1호
• /
• pp.44-47
• /
• 1993

A replication initiation gene was identified and its nucleotide sequence has been determined from a 3.8 kb, chloramphenicol acethyltransferase conferring R-plasmid pSBK203 of Staphylococcus aures. Location of the replication related region of pSBK 203 was determined by interuption with pUC 119 at XBaI and MspI sites which resulted in inactivation of replication in Bacilius subtilis. Base sequence of this region revealed on open reading frame of 942 base pairs, which encoded a 314 amino acid protein. Base sequence homology with other rep of pT181 family plasmids such as pT181, pC221, pC223, pS194, pU112, and pCW7 was ranged from 78% to 97% and the predicted amino acid sequence homology was from 72% to 95%.

• 한국멀티미디어학회논문지
• /
• 제9권4호
• /
• pp.388-400
• /
• 2006

LBS의 주요 기술 구성요소에는 무선측위기술 또는 위치결정기술, LBS 핵심기반 기술 및 LBS 응용기반 기술 등이 있다. 이 논문에서는 LBS의 주요기술 구성요소 중 핵심기반기술인 위치 데이터 관리 시스템을 설계한다. 제안 시스템은 LBS 응용인터페이스, 응용서비스 질의처리기, 이동객체 위치추정기, 위치정보 관리기, 실시간 데이터 수신기, 위치정보 데이터베이스로 구성된다. 데이터베이스 관리 기술을 활용하여 이동객체의 위치변화 정보를 효율적으로 관리하고 이와 관련된 유용한 정보를 LBS 사용자에게 제공하며, 기존의 상용 데이터베이스에서 처리할 수 없는 이동객체의 연속적인 위치정보를 처리하는 연산 및 위치추정 기능을 지원한다. 실시간 환경에서 발생되는 위치정보의 결손을 보완하는 위치정보 트리거링을 토대로 기존의 위치 정보 관리 시스템이 갖는 문제점을 보완한다. 제안한 위치 데이터 관리 시스템의 응용을 위해 산불관리 응용서비스에 적용한 결과를 보인다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.25-28
• /
• 1999

Consider connection-oriented wireless cellular net-works. To establish a circuit or virtual circuit in such a network, a paging message is broadcast over a region at which the destined mobile station is presumed to reside, (identified as a paging area). For an effective paging mechanism, it is desirable to provide the location information of mobile stations to the network. In this paper, we consider a mobile controlled location update scheme under which each mobile station periodically reports its current location information to the network by using an inherent timer (without measuring the power of signals transmitted from base stations). Based on the latest information about a mobile station's location, a paging area is selected to page the mobile station. Note that under this scheme, a mobile station may not yet have reported its location change while sojourning out of the current paging area. In such situation, the mobile station can not receive a paging message destined to it. Frequent location updates can reduce the paging failure rate incurred by mobile stations'sojourning out of the paging area. However, larger bandwidth is needed for location update as the location update rate is increased. On the other hand, as the size of the paging area is increased, the paging failure rate is decreased, while larger bandwidth is required for paging. Thus, we first present a model for mobility, paging and location update processes, and secondly investigate the effect of network parameters on the paging failure rate and the amount of bandwidth used for paging and location update. Finally, we formulate problems to find proper values for the location update rate and paging area size under the constraints on the bandwidth usage levels for location update and paging.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.706-711
• /
• 2007

Numerical studies were performed to examine the effects of notch location of impact specimens on the failure behavior of HAZ (heat affected zone) when Charpy V-notch impact test were made at a low temperature ($1^{\circ}C$). Carbon steel plate (SA-516 Gr. 70) with thickness of 25mm for pressure vessel was welded by SMAW (shielded metal-arc welding) and specimens were fabricated from the welded plate. Charpy tests were then performed with specimens having different notch positions of specimens varying from the fusion line through HAZ to base metal. A series of finite element analysis which simulates the Charpy test and crack propagation initiating at the tip of V-notch was carried out as well. The finite element analysis takes into account the irregular fusion line and non-homogenous material properties due to the notch location of the specimen in HAZ. Results reveals that the energies absorbed during impact test depend significantly on the notch location and direction of specimen. Finite element analysis also demonstrates that the notch location of specimens, to a great extent, influences the reliability and consistency of the test.

• 무역상무연구
• /
• 제64권
• /
• pp.187-210
• /
• 2014

As port functions change to act as an economic catalyst and take on a central position in industries engaged in international trade, port hinterland has become a significant component in international shipping. The success of port hinterland as a strategic base of logistic activities critically depends on location selection factor for international distribution center that links elements of global supply chain management. By examining multi-measurement items empirically, this paper analyzed location selection factor for international logistics distribution center in port hinterland, and evaluated Busan new port hinterland from the user's perspective. Employing exploratory factor analysis, the results revealed that the model structured around five factors incorporating geo-location and accessibility, availability, political supports, cost factors, and quality of business environment is valid and reliable in the context of the location selection factors for logistics distribution center in the context of port hinterland operations. The evaluation of Busan new port hinterland provides useful insights for strategic improvement to accommodate the users' expectation. Further, the model offers both a descriptive and diagnostic strategic management tool for port hinterland development and operations, to guide future improvement.