• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.168-178
• /
• 2017

In order to prevent major and chemical accidents, some of the plants which would like to install and operate hazard chemicals handling facilities must submit Off-site Consequence Analysis due to recent arisen leak accidents since 2015. A lot of chemical industrials choose gas detectors as mitigation equipment to early detect gas vapor. The way of placement of gas detectors has two methods; Code-based Design(CBD) and Performance-based Design. The CBD has principles for gas detectors to be installed with consideration for the place that is expected to accumulate gas, and the leak locations according to legal standards and technical guidelines, and has a possibility to be unable to detect by these rules to locate gas detectors by vapor density information. The PBD has two methods; a Geographic Method and Scenario based Method. The Scenario-based Method has been suggested to make up for the Geographic Coverage Method. This Scenario-based Method draw the best optimum placement of gas detectors by considering leak locations, leak speed information, leak directions and etc. However, the domestic placement guidelines just refers to the CBD. Therefore, this study is to compare existing placement location of gas detectors by the domestic CBD with placement locations, coverages and the number of gas detectors in accordance with the Scenario-based Method. Also this study has measures for early detecting interest of Vapor Cloud and suitable placement of gas detectors to prevent chemical accidents. The Phast software was selected to simulate vapor cloud dispersion to predict the consequence. There are two cases; an accident hole size of leak(8 mm) from API which is the highst accident hole size less than 24.5 mm, and a normal leak hole size from KOSHA Guide (1.8 mm). Detect3D was also selected to locate gas detectors efficiently and compare CBD results and PBD results. Currently, domestic methods of gas detectors do not consider any risk, but just depend on domestic code methods which lead to placement of gas detectors not to make personnels recognize tolerable or intolerable risks. The results of the Scenario-based Method, however, analyze the leak estimated range by simulating leak dispersion, and then it is able to tell tolerable risks. Thus it is considered that individuals will be able to place gas detectors reasonably by making objectives and roles flexibly according to situations in a specific plant.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5_2
• /
• pp.135-143
• /
• 2010

The 21st century is currently undergoing an era of urban regeneration. The purpose of this research is to secure and expand the green infrastructure with zoning regulation in the context of urban regeneration. This objective also seeks a way of urban regeneration through the use of existing large parks by employing park-based mixed use districts around the periphery of large urban parks and green spaces. This research examines the limits, problems of existing single- and mixed-use zoning districts for securing of green infrastructure by book review. This research finally advocates introducing a another type of urban mixed-use districts, namely park-based mixed use district and its characteristics and functions, by using landscape ecology and landscape urbanism as a theoretical basis. The results of this research suggested that large parks and green spaces should be considered as one of patch in landscape ecology. This research also discusses the possibility that, as patches have ecotones with greater biodiversity in the peripheral areas of it, the green infrastructure can be constructed around the periphery of large urban large parks and green spaces by introducing cultural ecotone of nature's convergence with the city. As a result, the green infrastructure and high density of land use and using behaviour can be increased. Park-based mixed use districts encourage the convergence of parks and the city, with the park being used as the main function; residential, commercial, business and cultural uses etc. are partial functions. In order for the park-based mixed use districts to be designated, the size of large urban parks and green spaces, as well as location, city function and condition of the peripheral areas all need to be considered. The necessity to examine the designated width of the park-based mixed use districts and the form of the peripheral area was also discussed. This research, which is based on investigative research results, suggests that further in-depth and comprehensive analysis of the actual condition of urban large parks and peripheral areas needs to be completed. Specialists and other interested parties, analysis and investigation on related plans and designs are also needed for the institutional practice.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1054-1065
• /
• 1993

A computer simulation is performed on the effectiveness of the active minimization of harmonically excited enclosed sound fields for producing global reduction in the amplitude of the pressure fluctuations. In this study for the appreciable reductions in total time averaged acoustic potential energy, $E_{pp}$, the transducer location strategies for three dimensional active noise control is presented based on a state space modal which approximates the closed acoustic field.In this study, the above theoretical basis is used to investigate the application of active control to sound fields of low modal density. By the used of room-like 3-dimensional rectangular enclosure it is demonstrated that the reductions in $E_{pp}$ can be achieved by using a single secondary source, provided that the source is placed within the half a wavelength from the primary source and placed away from nodal line of the sound field. Concerning the reductions in $E_{pp}$ by minimzing the pressure in sound fields by the use of 3-dimensional rectangular enclosure, the effects of the number of sensors and the locations of these sensors are investigated. When a few modes dominate the response it is found that if only a limited number of sensors are located away from nodal line and located at the pressure maxima of the sound field such as at each corner of a rectangular enclosure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.662-668
• /
• 2018

Most electric rooms are located in the underground spaces of buildings. When a fire occurs in electrical equipment, the fire expands to cable insulation material, resulting in toxic smoke and combustion products. If the smoke and combustion products quickly move vertically and horizontally, the evacuation of occupants and firefighting activities will be hindered. Therefore, it is necessary to design optimal equipment for smoke control in cases of fires in electric rooms. This study analyzes the characteristics of smoke and combustion products in fires in a cubicle-type switchboard in an electric room using PyroSim, which is based on the program Fire Dynamics Simulator (FDS). The fire modeling consists of four scenarios according to the operation mode of the mechanical ventilation equipment, the amount of air supply and exhaust, and the location of the air supply slot. The analysis shows that the mechanical ventilation equipment improves the smoke density, visibility, carbon monoxide concentration, and temperature characteristics. The visibility and temperature characteristics were improved when the air flow rate and the location of the air supply slot from fire defense regulations were applied.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.1-9
• /
• 2012

This study proposed a method to determine the number and location of bus information terminals (BIT), which is a device to provide passengers with bus arrival time at bus stops in a Bus Information System (BIS). In low-density area, it is not efficient to survey bus demands such as the number of passengers at all bus stops due to time and cost. This kind of a survey would, however, competently cover all bus stops if performed inside the bus. The number of riding-on and -off passengers is observed for every bus stop, and this data collection is repeated over all day. Data obtained from the survey are aggregated each bus stop. This study defines Utility Index (UI), an aggregate each bus stop. Bus stops are ranked according to UI and determined for a BIT within budget limitation. As a case study, a bus line in Jeju island, Korea, was dealt with. This case showed that the more aggregate the better data quality. This study is expected to contribute to solving a location problem of BITs in a BIS.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.83-92
• /
• 2017

This paper deals with numerical analysis of behavior of curved mechanically stabilized earth(MSE) walls with geosynthetics reinforcement. Unlike typical concrete retaining walls, MSE wall enables securing stability of higher walls without being constrained by backfill height and is currently and widely used to create spaces for industrial and residential complexes. The design of MSE walls is carried out by checking external stability, similarly to the external checks of conventional retaining wall. In addition, internal stability check is mandatory. Typical stability check based on numerical analysis is done assuming 2-dimensional condition (plane strain condition). However, according to the former studies of 3-dimensional MSE wall, the most weakest part of a curved geosynthetic MSE wall is reported as the convex location, which is also identified from the studies of the laboratory model tests and field monitoring. In order to understand the behaviour of the convex location of the MSE wall, 2-dimensional analysis clearly reveals its limitation. Furthermore, laboratory model tests and field monitoring also have restriction in recognizing their behaviour and failure mechanism. In this study, 3-dimensional numerical analysis was performed to figure out the behaviour of the curved part of the geosynthetic reinforced wall, and the results of the straight-line and curved part in the numerical analysis were compared and analysed. In addition, the behaviour characteristics at each condition were compared by considering the overburden load and relative density of backfill.

• Land and Housing Review
• /
• v.9 no.3
• /
• pp.29-36
• /
• 2018

This study aims at suggesting directions to make children's parks considering the actual groups using them by comparative analysis of age distribution in residents within area of use and locations of children's parks with regards to changes in population structure of low birth rate and aging. Cheongju was selected for the study, and the current status of children's parks and population structure were categorized into six stages and the investigation and analysis were conducted by statistics by population group and by using Arc GIS Program. As a result of the analysis, children under 13 were 13.1% of the entire population in Cheongju and share of middle-aged and aged group including middle-aged was 31.3%. Park area per one children under 13 was 5.9㎡ and based on walking use area(250m), average number of parks available by autonomous district was eight. As a result of the analysis of characteristics of distribution of children's parks, they are densely located in old downtowns or the distribution density was relatively high in newly developed areas such as Osong-eup or Ochang-eup. However, outer rural areas have no children's parks or relatively low rate. As a result of the analysis on population structure and co-efficient of park location, in nine autonomous districts, aged group is increasing, leading to decrease use of children's parks. If resident rate aged group is higher in the region where a children's park is located, it is necessary to re-compose the existing one to different one or to change purposes of parks to be planned. Also, in the area with similar rates in both children's group and aged group, composing complex parks for both of them could be considered. This study has limitations by not conducting field studies about the current status of use of children's parks in areas where the population structure has been changing and not suggesting specifically new types of parks according to changes in population structure. It is necessary to conduct the following studies about relationship between children's parks and policies for composing parks responding to changes in population structure in neighboring regions in future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.14-27
• /
• 2011

Cultural remains distribution maps have been published in 172 volumes of books, and the information about the remains in South Korea is also disclosed via the Internet to those who are interested in conducting archeological examinations or to those who are planning the national land use for various purposes. The purpose of this study is to statistically review the locational characteristics of the sites appearing in cultural sites map, and to determine the locational characteristics of these remains or sites. The location of sites was statistically analyzed based on the point density function of geographic information system of 87,859 sites found in cultural site maps. The results of this study show that the sites found in South Korea are mainly distributed around historical cities and the distributions are closely related to their proximity to rivers. Given that the period of time and type is very important to archeological studies, the results of this study indicate that detailed period of time and type may be necessary for further analysis. This study has highlighted that the research into the spatial analysis and interpretation of cultural heritage sites can contribute to the field of archeological studies.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.5
• /
• pp.261-269
• /
• 2023

In light of recent social concerns related to issues such as water supply pipe deterioration leading to problems like leaks and degraded water quality, the significance of maintenance efforts to enhance water source quality and ensure a stable water supply has grown substantially. In this study, scan statistic was applied to analyze water quality complaints and water leakage accidents from 2015 to 2021 to present a reasonable method to identify areas requiring improvement in water management. SaTScan, a spatio-temporal statistical analysis program, and ArcGIS were used for spatial information analysis, and clusters with high relative risk (RR) were determined using the maximum log-likelihood ratio, relative risk, and Monte Carlo hypothesis test for I city, the target area. Specifically, in the case of water quality complaints, the analysis results were compared by distinguishing cases occurring before and after the onset of "red water." The period between 2015 and 2019 revealed that preceding the occurrence of red water, the leak cluster at location L2 posed a significantly higher risk (RR: 2.45) than other regions. As for water quality complaints, cluster C2 exhibited a notably elevated RR (RR: 2.21) and appeared concentrated in areas D and S, respectively. On the other hand, post-red water incidents of water quality complaints were predominantly concentrated in area S. The analysis found that the locations of complaint clusters were similar to those of red water incidents. Of these, cluster C7 exhibited a substantial RR of 4.58, signifying more than a twofold increase compared to pre-incident levels. A kernel density map analysis was performed using GIS to identify priority areas for waterworks management based on the central location of clusters and complaint cluster RR data.

• Journal of Oral Medicine and Pain
• /
• v.41 no.3
• /
• pp.85-90
• /
• 2016

Purpose: The aim of this study was to develop an automated software to extract tooth and pulpal area from sectional cone-beam computed tomography (CBCT) images, which can guarantee more reproducible, objective and time-saving way to measure pulp/tooth volume ratio. Methods: The software program was developed using MATLAB (MathWorks). To determine the optimal threshold for the region of interest (ROI) extraction, user interface to adjust the threshold for extraction algorithm was added. Default threshold was determined after several trials to make the outline of extracted ROI fitting to the tooth and pulpal outlines. To test the effect of starting point location selected initially in the pulpal area on the final result, pulp/tooth volume ratio was calculated 5 times with different 5 starting points. Results: Navigation interface is composed of image loading, zoom-in, zoom-out, and move tool. ROI extraction process can be shown by check in the option box. Default threshold is adjusted for the extracted tooth area to cover whole tooth including dentin, cementum, and enamel. Of course, the result can be corrected, if necessary, by the examiner as well as by changing the threshold of density of hard tissue. Extracted tooth and pulp area are reconstructed three-dimensional (3D) and pulp/tooth volume ratio is calculated by voxel counting on reconstructed model. The difference between the pulp/tooth volume ratio results from the 5 different extraction starting points was not significant. Conclusions: In further studies based on a large-scale sample, the most proper threshold to present the most significant relationship between age and pulp/tooth volume ratio and the tooth correlated with age the most will be explored. If the software can be improved to use whole CBCT data set rather than just sectional images and to detect pulp canal in the original 3D images generated by CBCT software itself, it will be more promising in practical uses.