• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.370-375
• /
• 2006

This paper suggests the method for estimating a partial discharge (PD) location using divide of the inside transformer as a grid. The PD location is found swiftly and economically compared with the typical method detecting a PD. The reason is that the location of PD is detected in the section. The estimation of PD location is trained using the Neural Network. JavaNNS(Java Neural Network Simulator) and SNNS(Stuttgart Neural Network Simulator) are used for searching the location of PD. The simulation procedure is following, The transformer is assumed that the case is a regular hexahedron. The sensor is installed in a proper location. A section of PD location is set as a target, and training set is studied with several PD locations in the inside of the transformer. As a result of training process, the learning capability of neural network is excellent. The PD location is detected by division of internal structure of transformer and application of neural network.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.522-524
• /
• 2003

This paper presents a stability estimation method for subspan oscillation on overhead transmission line. It has been used method by conductor's fatigue limit or subspan oscillation amplitude. But it is not proper to estimation of subspan oscillation. We suggest to instability index for estimation method of subspan oscillation. And we tried to 4 bundled conductor system. This result will use to establish of the subspan location rules.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1524-1532
• /
• 2012

The calibration method using the existing environmental characteristics is to correct taking advantage of the data that is followed Judgement on the environment. If a decision is not made on the environmental judgement, the use of traditional methods may increase rather than errors. In this paper, UWB-based localization system is utilized. We propose Location Correction Algorithm which is available on if you can not make a judgment about any circumstances for location estimation system. Reference Points was selected to observe the characteristics of the localization system. This paper searched the characteristics of the localization system in LOS environment and NLOS environment, and used data correcting the location information of the moving object by combining the two environmental characteristics. The Location Correction Algorithm is applied to the location measured from the location estimation system. This algorithm corrects for the location information of the object. As a result, the location accuracy improvement were observed.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.328-335
• /
• 2022

With the advance of robot capabilities and functionalities, construction robots assisting construction workers have been increasingly deployed on construction sites to improve safety, efficiency and productivity. For close-proximity human-robot collaboration in construction sites, robots need to be aware of the context, especially construction worker's behavior, in real-time to avoid collision with workers. To recognize human behavior, most previous studies obtained 3D human poses using a single camera or an RGB-depth (RGB-D) camera. However, single-camera detection has limitations such as occlusions, detection failure, and sensor malfunction, and an RGB-D camera may suffer from interference from lighting conditions and surface material. To address these issues, this study proposes a novel method of 3D human pose estimation by extracting 2D location of each joint from multiple images captured at the same time from different viewpoints, fusing each joint's 2D locations, and estimating the 3D joint location. For higher accuracy, the probabilistic representation is used to extract the 2D location of the joints, considering each joint location extracted from images as a noisy partial observation. Then, this study estimates the 3D human pose by fusing the probabilistic 2D joint locations to maximize the likelihood. The proposed method was evaluated in both simulation and laboratory settings, and the results demonstrated the accuracy of estimation and the feasibility in practice. This study contributes to ensuring human safety in close-proximity human-robot collaboration by providing a novel method of 3D human pose estimation.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.2
• /
• pp.45-51
• /
• 1996

This paper presents a neural network approach for on-line estimation of partial discharge(PD) location using advanced correlation technique in power transformer. Ultrasonic sensors detect ultrasonic signals generated by a PD and the proposed method calculates time difference between the ultrasonic signals at each sensor pair using the cross-correlation technique applied by moving average and the Hamming window. The neural network takes distance difference as inputs converted from time difference, and estimates the PD location. Case studies showed that the proposed method using advanced correlation technique and a neural network estimated the PD location better than conventional methods.

• Journal of Internet Computing and Services
• /
• v.14 no.6
• /
• pp.9-18
• /
• 2013

In this paper, we design and implement an intelligent system for finding objects with RFID(Radio Frequency IDentification) tag in which an mobile robot can do. The system we developed is a learning system of artificial neural network that uses RSSI(Received Signal Strength Indicator) value as input and absolute coordination value as target. Although a passive RFID is used for location estimation, we consider an active RFID for expansion of recognition distance. We design the proposed system and construct the environment for indoor location estimation. The designed system is implemented with software and the result related learning is shown at test bed. We show various experiment results with similar environment of real one from earning data generation to real time location estimation. The accuracy of location estimation is verified by simulating the proposed method with allowable error. We prepare local test bed for indoor experiments and build a mobile robot that can find the objects user want.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.84-92
• /
• 2020

This paper describes the estimation method of cable fault location in rocket motors using M-sequence (Maximal Length Sequence). In order to estimate the location of a cable fault, three methods have been usually used: TDR (Time Domain Reflectometry), FDR (Frequency Domain Reflectometry), and TFDR (Time-Frequency Domain Reflectometry). However, these methods suffer the disadvantage of requiring users to be close to a test field, which is dangerous. The estimation method of cable fault location using M-sequence is proposed to solve this problem. The proposed method can make use of DAS (Data Acquisition System). The experiments were three cases: damaged, open, and short. The RG-58 coaxial cable was used in the experiments. As a result, the proposed method has better performance than that of conventional methods such as TDR and TFDR.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.117-120
• /
• 2002

Electrical power system has very complexity problem that it is plan measurement system to achieve Harmonic State Estimation (HSE). This complexity problem depends on discord of necessary accuracy, certainty of noise that exist in data communication damage and converter, adaptability of network modification and minimum of expense size of system, estimated monitering. Also, quantity of available measurement equipment for harmonic measurement has been limited. Therefore, systematic method that choose measurement location for harmonic state estimation. This paper is that see proposed HSE that use Observability Analysis(OA) for harmonic state estimation of electrical power system. OA depends on measurement number, measurement location and measurement form here, it is analysis method that depend on network form and admittance of the system. OA used achieve harmonic state estimation that it is Applied to New Zealand electrical power system to prove validity of HSE algorithm that propose. This study result about harmonic state estimation of electrical power system displayed very economical and effective method by OA.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.8-11
• /
• 2021

This paper proposes a method of estimating the optimal position of a robot in order to provide a service by approaching a user located outside the sensing area of the robot in an indoor environment. First, in order to estimate the user's location, the location in the indoor environment was estimated by applying a trilateral approach to the beacon-tag module data, and Voronoi thinning to set the optimal movement goal from the user's estimated location. Based on the generated nodes, the final location was estimated through the calculation of the user location, obstacle, and movement path, and the location accuracy of the service robot was verified through the movement of the destination of the actual robot platform.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.124-126
• /
• 2000

The Minimum-Norm Least-Square(MNLS) approach based on lead field theory is an useful method to find an unique inverse solution for the measured magnetic field. The lead field depends on head geometry and location of sources and sensors. So, optimization of sensor array location is important issue for MNLS estimation. In this paper, we present an investigation for the optimization of sensor array location in computer simulation.