• 설비공학논문집
• /
• 제13권8호
• /
• pp.730-738
• /
• 2001

This work discusses the pressure droop, heat and mass transfer of the finned-tube heat exchangers having 7 mm tubes and offset strips in dehumidifying applications. It focuses on the fin material saving and the reduction of pressure drop. The experiment was conducted using three times scaled-up models to simulate the performance of the prototype. Eight kinds of fins having different strips and S shape edges were tested. the area density of the strip was a major factor and its shape and the location were secondary factors on the pressure drop, the heat and mass transfer. The reduced-area fin can almost equal the non-reduced fin in the aspect of heat and mass transfer. The strip fins proposed in the present work can considerably reduce both the pressure drop and the fin material for similar thermal load.

• Geomechanics and Engineering
• /
• 제13권2호
• /
• pp.301-318
• /
• 2017

Based on the existing research results, a three-dimensional failure mechanism of tunnel face was constructed. The dynamic seismic effect was taken into account on the basis of quasi-static method, and the nonlinear Mohr-Coulomb failure criterion was introduced into the limit analysis by using the tangent technique. The collapse pressure along with the failure scope of tunnel face was obtained through nonlinear limit analysis. Results show that nonlinear coefficient and initial cohesion have a significant impact on the collapse pressure and failure zone. However, horizontal seismic coefficient and vertical seismic proportional coefficient merely affect the collapse pressure and the location of failure surface. And their influences on the volume and height of failure mechanism are not obvious. By virtue of reliability theory, the influences of horizontal and vertical seismic forces on supporting pressure were discussed. Meanwhile, safety factors and supporting pressures with respect to 3 different safety levels are also obtained, which may provide references to seismic design of tunnels.

• 한국컴퓨터정보학회논문지
• /
• 제21권4호
• /
• pp.9-15
• /
• 2016

Symmetry is everywhere in the world around us from galaxy to microbes. From ancient times symmetry is considered to be a reflection of the harmony of universe. Symmetry is not only a significant clue for human cognitive process, but also useful information for computer vision such as image understanding system. Application areas include face detection and recognition, indexing of image database, image segmentation and detection, analysis of medical images, and so on. The technique used in this paper extracts edges, and the perpendicular bisector of any two edge points is considered to be a candidate axis of symmetry. The coefficients of candidate axis are accumulated in the coefficient space. Then the axis of symmetry is determined to be the line for which the coefficient histogram has maximum value. In this paper, an improved method is proposed that utilizes the directional information of edges, which is a byproduct of the edge detection process. Experiment on 20 test images shows that the proposed method performs 22.7 times faster than the original method. In another test on 5 images with 4% salt-and-pepper noise, the proposed method detects the symmetry successfully, while the original method fails. This result reveals that the proposed method enhances the speed and accuracy of detection process at the same time.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.81-88
• /
• 2005

There have been many studies on generation equipment and plant piping, but there is no significant study result on the heat transportation pipe. As such, this study established basic theory on the compensated method among buried pipe for regional heating, and further obtained the following results by applying the conditions of AGFW and NCHPP respectively in calculation of friction and maximum installation distance for the buried pipe. Friction coefficient according to the types and physical properties of soil, friction and maximum installation distance were compared to set the application value of friction coefficient according to the location of works. Calculation formula of clay load to be applied for calculation of friction was introduced to the formula of AGFW and the formula of NCHPP that has been used in Nowon district since 1997 to determine the difference and applicability. $120^{\circ}C$ and $95^{\circ}C$ were applied in temperature difference for expansion volume to compare the arm length at the curve pipe so thai it can be reflected in the design in the future. Maximum installation distance according to thickness of pipe was compared to present the necessity of unified specification so that same kinds of pipe materials can be used for same kinds of works.

• 한국전자파학회논문지
• /
• 제21권12호
• /
• pp.1432-1437
• /
• 2010

본 논문에서는 하나의 이중 모드 공진기를 이용한 대역 통과 필터의 새로운 설계 방법을 제안한다. 제안한 설계 방법은 이중 모드 공진기를 두 개의 단일 공진기로 보고 공진기 사이의 결합 계수를 구하여, 이를 바탕으로 이중 모드 공진기의 두 공진 주파수를 계산한 후 필터 전송 영점의 위치에 따라 각각 배치하였다. 제안한 설계 방법을 검증하기 위해, E-모양의 이중 모드 공진기를 이용하여 WLAN 서비스 대역을 만족하고, 전송 영점이 각각 상측과 하측에 위치하는 대역 통과 필터를 설계 제작하였다.

• 한국해양공학회지
• /
• 제30권5호
• /
• pp.381-388
• /
• 2016

An underwater glider makes it easy to explore a wide area with low power. However, an underwater glider is difficult to use for rapid collection, because the surfacing location cannot be predicted after a dive. Thus, simulation research is needed to predict the swimming path. In this paper, based on research, a linearized equation is derived for the drag coefficient at each angle of attack by assuming the boundary conditions for the Slocum underwater glider and performing a computational flow analysis.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.297-302
• /
• 1999

Finite element analysis is peformed about the crack propagation in half-space due to sliding contact. The analysis is based on linear elastic fracture mechanics and stress intensity factor concept. The crack location is fixed and the friction coefficient between asperity and half-space is varied to analyze the effect of surface friction on stress Intensity factor for horizontal crack. The crack propagation direction is predicted based on the maximum range of shear and tensile stress intensity factor.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.73-76
• /
• 2006

The shape and dimension of precast concrete structure used in habor construction(caisson, block, etc.) are considered productive facility abilities, demanded minimum dimension in work of each member, the relation between the depth of water and a location of leaving, work conditions of towing and leaving, after leaving, differential settlement, etc. As this study examined friction resistance effect of financially designed precast concrete structure formed convex in bottom and stone mound.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1466-1473
• /
• 2012

소프트 아이스크림은 환형 증발부의 외측에서 증발하는 R-404A에 의해 형성된 얼음을 스크레이퍼로 깍아내어 제조된다. 본 연구에서는 소프트 아이스크림 증발기의 냉매 측 및 아이스크림 측 열전달계수를 도출하였다. 실험 결과 환형부 내 냉매 유동은 격막에 의해 매우 복잡한 양상을 보이고 열전달계수도 위치에 따라 현저히 달랐다. 즉, 유입위치의 열전달 계수가 다른 부분에 비하여 낮게 나타났다. 냉매측 평균 열전달계수는 열유속의 증가에 따라 또한 포화온도의 감소에 따라 증가하였다. 열유속과 포화온도를 변수로 하여 평균 열전달계수를 예측하는 상관식을 도출하였다. 아이스크림 측 열전달계수는 연속적으로 진동하였다. 이는 스크레이퍼에 의해 관벽의 얼음이 주기적으로 탈착되기 때문으로 판단된다. 아이스크림 원액의 단상 열전달계수는 냉각 기간 중 150 W/$m^2K$에서 250 W/$m^2K$로 증가하였다. 아이스크림 제조 시 열전달계수는 대략 280 W/$m^2K$로 나타났다.

• 산업기술연구
• /
• 제26권B호
• /
• pp.73-81
• /
• 2006

A sensitivity analysis about effects of influencing factors on the stability of Soil cut slope was performed. Slope stability analyses were carried out under dry, rainy and seismic conditions. Dominant factors controlling the slope stability were chosen such as cohesion and internal friction angle, unit weight of soil, water table and seismic horizontal coefficient used for the slope stability during earthquake. Parametric stability analysis with those factors was performed for sensitivity analysis. As results of analyzing the sensitivity of factors under dry and rainy conditions, effects of cohesion, internal friction angle and unit weight of soil on the stability of slope are more critical in the dry condition than in the rainy condition. Cohesion and internal friction angle are more dominant factors influencing the slope stability irrespective of dry or rainy conditions than unit weight of soil and the horizontal seismic coefficient. The unit weight and the horizontal seismic coefficient affects crucially the stability according to conditions of slope formation and dry or rainy seasons. For the effect of horizontal seismic coefficient on stability of slope, safety factor of slope is not affected significantly by dry or rainy conditions. However, increase of the horizontal seismic coefficient under the rainy condition floes reduce the safety factor significantly rather than the dry condition. Therefore, it is needed that the location of the water table is assigned appropriately to satisfy the required safety factor of stability in the case of checking slope stability for the rainy and seismic conditions.