• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.40-51
• /
• 2021

In this paper, the design requirements was produced by analyzing domestic and foreign regulations of the vertical takeoff and landing site required to operate the urban air mobility (UAM) system in Korea and the size of the take-off and landing pads were defined, and the configuration of vertiport was proposed. First, for the metropolitan area with high population density, pilot locations of the vertical take-off and landing site were selected based on the demonstration routes suggested by the Ministry of Land, Infrastructure and Transport and analyzed the characteristics of each location and determined the number of possible installations of vertiport by measuring each site. After that, variables necessary for the operation of the vertical takeoff and landing area were set, and the hourly, daily, monthly aircraft operating cycle, the number of acceptable people, and efficiency were calculated according to the number of simultaneous operation and the number of stand. Finally, using CATIA, the configurations of the virtual vertiport was created by applying the design requirements.

• Advances in Computational Design
• /
• v.7 no.2
• /
• pp.153-171
• /
• 2022

The present study aimed to find a way to create forms that can simultaneously meet several architectural requirements by applying generative design methods specifically focused on cellular automata. In other words, it is tried to find various forms of architecture that all have common features. Because of the useful features of cellular automata, we decided to use it to generate various forms, but make a relation between the discrete nature of cellular automata and the continuous nature of architecture, was the major problem of our project. To achieve this goal, three consecutive stages were designed. In the first stage, independent variables including the location of the building, the height of the building, and the building area were considered as the inputs of the model. In the second stage, after locating the building, the building's main shell was designed as a hidden geometry for the cellular automata and then the cellular automata were determined based on this shell. The main result of this research is establishing a logical relationship between the discrete geometry of the cellular automata and the continuous search space such that it creates various optimized forms. Although we specify the site plan of this project at Iran-Tehran, this research can be generalized to various design sites as well as different projects, allowing the architectsto alter the cell dimensions, cell density, etc., based on their opinion and project needs.

• Journal of Korea Spatial Information System Society
• /
• v.5 no.2 s.10
• /
• pp.91-103
• /
• 2003

There are currently tremendous amount of geotechnical information saved, which has been qcquired for essential application of site selection, plan, design, constructin, repari in the builing work. However, due to the lack of the location data attribute, there has been a trouble in its analysis and GIS implementation. In this study, the geotechnical information aquisition program(PGeo) for real-time database in the field and geotechnical information reporting program(GeoReport) by Web-GIS for additional data input and its reporting function has been developed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.3
• /
• pp.128-137
• /
• 1997

In this study, examined influence of consolidation effect that had affected by location of pump inlet that was set collection well for drainage of pore water discharged by embankment on soft ground through the field test. The results of this study are summarized as follows; 1 Initial consolidation curve value were larger than theoritic value, the cause of these phenomena were thought influence of secondary consolidation and three dimensional strain of soft clay. 2. The settlement value of Hosino method was larger than that of Hyperbolic method, but settlement value of Hyperbolic method was accurate more than that of Hosino method in the prediction of settlement. 3. When pump inlet in collection well came down from GL+O.3m to GL-1.5m, settlement value increased about 10cm and when the ground water level was made insitu after pumping had completed , settlement was expanded about 7~8cm. So it is found that location change of pump inlet bad an influence on settlement remarkably. 4. If location of pump inlet in collection well for large scale estate or wide road site is lowered than original ground level, the settlement will be accelerated effectively, and at this stage automatic pump must be used in pumping.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.189-200
• /
• 2016

The Republic of Tajikistan has ten former uranium mining sites. The total volume of all tailings is approximately 55 million tonnes, and the covered area is more than 200 hectares. The safe management of legacy uranium mining and tailing sites has become an issue of concern. Depending on the performance requirements and site-specific conditions (location in an arid, semiarid or humid region), a cover system for uranium tailings sites could be constructed using several material layers using both natural and man-made materials. The purpose of this study is to find a feasible cost-effective cover system design for the Degmay uranium tailings site which could provide a long period (100 years) of protection. The HELP computer code was used in the evaluation of potential Degmay cover system designs. As a result of this study, a cover system with 70 cm thick percolation layer, 30 cm thick drainage layer, geomembrane liner and 60 cm thick barrier soil layer is recommended because it minimizes cover thickness and would be the most cost-effective design.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.451-456
• /
• 2013

Development of the technologies for offshore wind power is proceeding actively and the installation capacity is continuously increasing because of its many advantages in comparison with the land wind power. Accordingly, project for Southwestern 2.5GW offshore wind power plant is in progress in Korea. Design of electric power systems for offshore wind power plant is very important due to its high investment and operational costs. Hence, it needs to be designed in order to minimize costs. This way can be employed in determining the installation location of offshore substation for HVAC wind power plant. According to the offshore substation site, MV inter-array cable and HV export cable lengths vary and they change a total cost regarding submarine cable. This paper represents cost models with variables which are MV inter-array cable and HV export cable lengths to locate the offshore substation for HVAC wind power plant. It is classified into submarine cable installation cost, reactive power compensator installation cost, ohmic losses, and unsupplied energy cost. By minimizing a total cost, an appropriate installation site of the offshore substation is determined.

• Korean Institute of Interior Design Journal
• /
• v.19 no.6
• /
• pp.38-46
• /
• 2010

The objective of this study is to find an educational method that is able to increase creativity using both left and right directed thinking with complementary cooperation. The premise of experimental study is that analogical inference is a great help to produce a creative design, and the design tasks of residential space are given to 20 students, voluntary participants in four experimental tests. The first test is conducted with fundamental conditions such as site or location, users and their design requirements. Other three tests make a clear distinction with three cases using verbal analogy from many keywords, using visual analogy from many images and using verbal visual analogy from keywords and visual images. Consequently, when students use both verbal and visual analogy in solving design tasks their creative ability qualitatively as well as quantitatively is higher than in using only verbal analogy or visual analogy. Further study will be progressed with the design tasks of residential space in order to have an effective verification by comparing students' design results classified into two groups. One is a control group that consists of sophomore students in a college and another is a comparison group that consists of sophomore students in an university.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3949-3956
• /
• 2022

Kori Unit 1 is planning a system decontamination project to reduce radiation exposure of decommissioning workers, prevent the spread of contamination and down-grade the level of classification of radioactive waste. The system decontamination range for Kori Unit 1 will be the entire primary system, including RCS, CVCS and RHRS. Some system design modifications are required for the system decontamination operation. In this paper, major system design modifications were evaluated based on the conditions that system restoration is needed after completion of system decontamination. The major system design modifications are CIDF connection location to system, system decontamination operating pressure control, RCP seal water injection and formation of letdown flow. It was evaluated that there was no negative effect on the system due to the system design modifications. However, as the RCP seal water is injected into the system in the oxidation process, the concentration of the oxidizing agent is diluted. Therefore, the oxidizing agent injection and system decontamination operation procedures should be developed to address the dilution effect of the oxidizing agent. The system design modifications dealt in this paper will be finally confirmed through on-site investigation in the future, and if necessary, the system design modifications will be re-evaluated.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.05a
• /
• pp.123-126
• /
• 2004

This study aims to identify the change of bathroom design characteristics through the investigation of bathroom space in apartment model houses. The bathroom space of each private exclusive area was analyzed from the plane characteristics perspective such as quantity, location, size and shape. For this study, site survey and observation was performed to analyze the characteristics of plane and design based on twenty seven model houses of seven large-sized construction firms with Seoul area focused on. Research object was restricted to from ten Pyeong's apartment to sixty Pyeong's in order to understand various characteristics of twenty seven model houses. Since analysis variables were not diverse, the main three factors - frequency, percentage and an average - were represented in Microsoft Excel worksheet, focusing on the quantity of each case, design characteristics and pattern. 1) The quantity of bathrooms: It was turned out that the quantity of bathroom was one in ten Pyeong's apartment while it was two in thirty, forty, and fifty Pyeong's apartment. There were mostly two bathrooms available in twenty Pyeong's apartment even if only one was planned in few cases. All powder rooms and dress rooms in twenty and fifty Pyeong's apartment were designed to be separated and be accessible through bedroom. 2) The size of bathrooms: As private exclusive area increased, the size of bathroom for both family and couple increased. Couple bathrooms had the tendency to be equipped with shower booth and bathtub at the same place or have more tubs than family bathrooms because couple bathrooms were bigger than family bathrooms. 3) The location of bathrooms: Couple bathrooms were usually located beyond dress rooms or powder rooms while family bathrooms were mostly located at the entrance side. 4) The shape of bathrooms: Shower booth was assumed to be in general vogue because family bathrooms, for the most part, were comprised of a flush toilet, a washstand and a shower booth. In the case of couple bathrooms, a flush toilet, a washstand, a shower booth and a tub were generally equipped in more than twenty Pyeong's apartments while a tub was not installed in twenty Pyeong's apartments.

• Korean Institute of Interior Design Journal
• /
• v.24 no.6
• /
• pp.221-228
• /
• 2015

This study aims to define concepts on Hospital Design Focused on System to respond to the development and change by comparing general design methods of the General hospital architecture in Korea and analyze elements suitable to concepts on Hospital Design Focused on System in the General hospital architecture through examining the transformation of General hospitals in Korea. Essential architectural elements composing the Hospital Design Focused on System are as follows. First of all, the elements which can react to development of hospital architecture are HOSPITAL STREET and site situation. Secondly, core, equipment shaft, column, MAIN STREET and air handling unit room are elements of great importance as the location of these elements determines the dimensions and scale of the space which hospital functions are assigned to. Third, the area in regard to the rate of change is formed by MAIN STREET, which is the primary element, and envelope. The depth between MAIN STREET and envelope is defined as space depth. The flexible area is determined depending on this space depth and thus how to set up this flexible area determines the degree of readiness in responding to the change.