• Journal of the Korea Society of Computer and Information
• /
• v.24 no.4
• /
• pp.169-176
• /
• 2019

Wireless sensor networks are used to monitor and control areas in a variety of military and civilian areas such as battlefield surveillance, intrusion detection, disaster recovery, biological detection, and environmental monitoring. Since the sensor nodes are randomly placed in the area of interest, separation of the sensor network area may occur due to environmental obstacles or a sensor may not exist in some areas. Also, in the situation where the sensor node is placed in a non-relocatable place, some node may exhaust energy or physical hole of the sensor node may cause coverage hole. Coverage holes can affect the performance of the entire sensor network, such as reducing data reliability, changing network topologies, disconnecting data links, and degrading transmission load. It is possible to solve the problem that occurs in the coverage hole by finding a coverage hole in the sensor network and further arranging a new sensor node in the detected coverage hole. The existing coverage hole detection technique is based on the location of the sensor node, but it is inefficient to mount the GPS on the sensor node having limited resources, and performing other location information processing causes a lot of message transmission overhead. In this paper, we propose an Adjacent Matrix-based Hole Coverage Discovery(AMHCD) scheme based on connectivity of neighboring nodes. The method searches for whether the connectivity of the neighboring nodes constitutes a closed shape based on the adjacent matrix, and determines whether the node is an internal node or a boundary node. Therefore, the message overhead for the location information strokes does not occur and can be applied irrespective of the position information error.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.32-38
• /
• 2012

Each sensor node can know its location in several ways, if the node process the information based on its geographical position in sensor networks. In the localization scheme using GPS, there could be nodes that don't know their locations because the scheme requires line of sight to radio wave. Moreover, this scheme is high costly and consumes a lot of power. The localization scheme without GPS uses a sophisticated mathematical algorithm estimating location of sensor nodes that may be inaccurate. AHLoS(Ad Hoc Localization System) is a hybrid scheme using both GPS and location estimation algorithm. In AHLoS, the GPS node, which can receive its location from GPS, broadcasts its location to adjacent normal nodes which are not GPS devices. Normal nodes can estimate their location by using iterative triangulation algorithms if they receive at least three beacons which contain the position informations of neighbor nodes. But, there are some cases that a normal node receives less than two beacons by geographical conditions, network density, movements of nodes in sensor networks. We propose an indirect localization scheme for low-density sensor nodes which are difficult to receive directly at least three beacons from GPS nodes in wireless network.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.251-256
• /
• 2006

In the work package 'Integrated Positioning' of the research project NAVIO (Pedestrian Navigation Systems in Combined Indoor/Outdoor Environements) we are dealing with the navigation and guidance of visitors of our University. Thereby start points are public transport stops in the surroundings of the Vienna University of Technology and the user of the system should be guided to certain office rooms or persons. For the position determination of the user different location sensors are employed, i.e., for outdoor positioning GPS and dead reckoning sensors such as a digital compass and gyro for heading determination and accelerometers for the determination of the travelled distance as well as a barometric pressure sensor for altitude determination and for indoor areas location determination using WiFi fingerprinting. All sensors and positioning methods are combined and integrated using a Kalman filter approach. Then an optimal estimate of the current location of the user is obtained using the filter. To perform an adequate weighting of the sensors in the stochastic filter model, the sensor characteristics and their performance was investigated in several tests. The tests were performed in different environments either with free satellite visibility or in urban canyons as well as inside of buildings. The tests have shown that it is possible to determine the user's location continuously with the required precision and that the selected sensors provide a good performance and high reliability. Selected tests results and our approach will be presented in the paper.

• Spatial Information Research
• /
• v.19 no.1
• /
• pp.127-133
• /
• 2011

Recently, with the advances in sensor techniques and net work computing, Ubiquitous Sensor Network (USN) has been received a lot of attentions from various communities. The sensor nodes distributed in the sensor network tend to continuously generate a large amount of data, which is called stream data. Sensor stream data arrives in an online manner so that it is characterized as high-speed, real-time and unbounded and it requires fast data processing to get the up-to-date results. The data stream has many application domains such as traffic analysis, physical distribution, U-healthcare and so on. Therefore, there is an overwhelming need of a USN middleware for processing such online stream data to provide corresponding services to diverse applications. In this paper, we propose a novel USN middleware which can provide users both context-aware service and meaningful sequential patterns. Our proposed USN middleware is mainly focused on location based applications which use stream location data. We also show the implementation of our proposed USN middleware. By using the proposed USN middleware, we can save the developing cost of providing context aware services and stream sequential patterns mainly in location based applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.260-263
• /
• 2019

Recently, the need of researches and developments about WSN(Wireless Sensor Network) technologies, which can be applied to services to regions where the access is difficult or services that require continuous monitoring, has gradually increased due to its expansion and efficiency of the application areas. In this paper, we analyze existing researches which focused on reducing packet loss rate and increasing lifetime of sensor nodes. Then, we conduct studies about performance improvement factors where some schemes - clustering and location-based approaches - are applied and compare our study results with existing researches. Based on our studies, we are planning to conduct researches about a new scheme that could contribute to improve WSN's performance in terms of packet loss rate and network lifetime.

• Journal of the Korean Geographical Society
• /
• v.43 no.2
• /
• pp.220-234
• /
• 2008

In many security monitoring contexts, the performance or efficiency of surveillance sensors/networks based on a single sensor type may be limited by environmental conditions, like illumination change. It is well known that different modes of sensors can be complementary, compensating for failures or limitations of individual sensor types. From a location analysis and modeling perspective, a challenge is how to locate different modes of sensors to support security monitoring. A coverage-based optimization model is proposed as a way to simultaneously site k different sensor types. This model considers common coverage among different sensor types as well as overlapping coverage for individual sensor types. The developed model is used to site sensors in an urban area. Computational results show that common and overlapping coverage can be modeled simultaneously, and a rich set of solutions exists reflecting the tradeoff between common and overlapping coverage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1B
• /
• pp.31-39
• /
• 2007

Wireless sensor network can increase independence and flexibility of network because it consists of mobile node without the aid of fixed infra, but, by unrestricted for the participation and breakaway of node, it has the difficulty in routing which is a basic function of network operation. To solve those problems, a suggestion is the location-based routing algorithm using geological or logical location information. The suggested algorithm which is based on cluster for location information of sensor is applicable to wireless sensor network of discrete situation, which guarantees extension and mobility. By efficiency analysis and reactive routing algorithm of current DSR and AODV, packet transmission ratio, routing overheads, and average communication expense is compared as node increases.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.560-567
• /
• 2016

To solve the problem of parameter optimization in image sensor-based visible light positioning systems, theoretical limits for both the location and the azimuth angle of the image sensor receiver (ISR) are calculated. In the case of a typical indoor scenario, maximum likelihood estimations for both the location and the azimuth angle of the ISR are first deduced. The Cramer-Rao Lower Bound (CRLB) is then derived, under the condition that the observation values of the image points are affected by white Gaussian noise. For typical parameters of LEDs and image sensors, simulation results show that accurate estimates for both the location and azimuth angle can be achieved, with positioning errors usually on the order of centimeters and azimuth angle errors being less than $1^{\circ}$. The estimation accuracy depends on the focal length of the lens and on the pixel size and frame rate of the ISR, as well as on the number of transmitters used.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.707-716
• /
• 2015

The purpose of a localization system is to estimate the coordinates of the geographic location of a mobile device. The accuracy of wireless localization is influenced by nonline-of-sight (NLOS) errors in wireless sensor networks. In this paper, we present an improved time of arrival (TOA)-based localization method for wireless sensor networks. TOA-based localization estimates the geographic location of a mobile device using the distances between a mobile station (MS) and three or more base stations (BSs). However, each of the NLOS errors along a distance measured from an MS (device) to a BS (device) is different because of dissimilar obstacles in the direct signal path between the two devices. To accurately estimate the geographic location of a mobile device in TOA-based localization, we propose an optimized localization method with a BS selection scheme that selects three measured distances that contain a relatively small number of NLOS errors, in this paper. Performance evaluations are presented, and the experimental results are validated through comparisons of various localization methods with the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.351-356
• /
• 2011

In this paper, we design a pet location tracking and remote monitoring system that uses ultrasonic, temperature, humidity and illumination sensors to study behavioral patterns and habits. Using ultrasonic waves to calculate distances, a WSN(Wireless Sensor Network) was constructed to transmit data at pet's location, such as temperature, humidity and illumination, to a sink mote. Data received by the system are stored in the database in real time to trace pet's location. Interference among transmitting motes was eliminated by sequentially transmitting RF beacons using sink mote's beacon as the reference signal. Experiments were performed with the laboratory prototype of a pet animal monitoring system implemented for this study. The system analyzes locations of a pet and displays movement patterns, areas of movement, temperature, humidity and illumination using a GUI (graphical user interface).