• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.40-43
• /
• 2000

Our studies diagnose insulation degradation using the method of computer sensing system, which has the advantages of PD(partial discharge) and AE(acoustic emission) sensing system. To use advantages of these two methods can be used effectively to search for treeing location and PD in some materials. In analysis method of degradation, using statically operator such as the center of gravity (G), the gradient of the discharge distribution(C), we have analyzed for the prediction of life which we can be obtained the time, occurred of many pulse of small discharge amplitude.

• Korean Journal of Remote Sensing
• /
• v.6 no.1
• /
• pp.25-37
• /
• 1990

Methods of geometric correction for the Advanced Very High Resolution Radiometer imagery of NOAA satellites were developed and applied to the software for image processing of meteorological satellite data. The software for finding the earth location of each scan position and the software for gridding on original imagery were dedigned. On the assumption of circular orbits and the spherical earth, the methods developed were sufficiently accurate in the purpose of most meteorological data analyses.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.722-728
• /
• 2010

This paper presents the design and fabrication model of a touchpad based on a contact-resistance-type force sensor. The touchpad works as a touch input device, which can sense contact location and contact force simultaneously. The touchpad is 40 mm wide and 40 mm long. The touchpad is fabricated by using a simple screen printing technique. The contact location is evaluated by the calibration setup, which has a load cell and three-axis stages. The location error is approximately 4 mm with respect to x-axis and y-axis directions. The force response of the fabricated touchpad is obtained at three points by loading and unloading of the probe. The touchpad can detect loads from 0 N to 2 N. The touchpad shows a hysteresis error rate of about 11% and uniformity error rate of about 3%.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.256-259
• /
• 2004

Recently, Location-based services(LBS) allow consumers to receive services based on their geographic location data. Users want to take services based location information with portable devices. And Point of Interest(POI) information's usage is increasing with mobile device's development and user's interest. And this paper shows that we connect the multimedia POI database(DB), provide the multimedia services through the portable devices and search POI using location and direction information. The multimedia POI is consisted of sound, image, moving image and animation with location information. When we search POI, we find POI in DB using the area zone and direction information.[l]

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.897-899
• /
• 2003

Recently, owing to the rapid progress of Telecommunication technology, the increase of wireless internet’s subscriber and diffusion of wireless device, LBS (Location Based Services) which take advantage of user's location information and receive information in concerning with user’s location to be essential services. Location Based Services are related the moving objects which change their locations through time. Therefore, to provide location-based services efficiently, it is required that an efficient system which could acquire, store, and query the large number of locations. In this paper, we design management system to insert and search a huge number of Moving Object based on Legacy Relational Database.

• Journal of Information Processing Systems
• /
• v.15 no.5
• /
• pp.1036-1054
• /
• 2019

Recently, concomitant with a surge in numbers of Internet of Things (IoT) devices with various sensors, mobile crowdsensing (MCS) has provided a new business model for IoT. For example, a person can share road traffic pictures taken with their smartphone via a cloud computing system and the MCS data can provide benefits to other consumers. In this service model, to encourage people to actively engage in sensing activities and to voluntarily share their sensing data, providing appropriate incentives is very important. However, the sensing data from personal devices can be sensitive to privacy, and thus the privacy issue can suppress data sharing. Therefore, the development of an appropriate privacy protection system is essential for successful MCS. In this study, we address this problem due to the conflicting objectives of privacy preservation and incentive payment. We propose a privacy-preserving mechanism that protects identity and location privacy of sensing users through an on-demand incentive payment and group signatures methods. Subsequently, we apply the proposed mechanism to one example of MCS-an intelligent parking system-and demonstrate the feasibility and efficiency of our mechanism through emulation.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.357-360
• /
• 2007

An asset tracking using wireless sensor network is concerned with geographical locations of sensor nodes. The limited size of sensor nodes makes them attractable for tracking service, at the same time their size causes power restrictions, limited computation power, and storage restrictions. Due to such constrained capabilities, the wireless sensor network basically assumes the failure of sensor nodes. This causes a set of concerns in designing asset tracking system on wireless sensor network and one of the most critical factors is location uncertainty of sensor nodes. In this paper, we classify the location uncertainty problem in asset tracking system into following cases. First, sensor node isn't read at all because of sensor node failure, leading to misunderstanding that asset is not present. Second, incorrect location is read due to interference of RSSI, providing unreliable location of asset. We implemented and installed our asset tracking system in a real environment and continuously monitored the status of asset and measured error rate of location of sensor nodes. We present experimental results that demonstrate the location uncertainty problem in asset tracking system using wireless sensor network.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.475-477
• /
• 2005

본 논문에서는 사용자의 위치정보를 이용하여 서비스를 제공하는 위치 기반 서비스를 제공을 위한 위치 인식 시스템에 대해서 제안한다. 많은 연구에서 사용자의 위치를 인식하는 기법과 정확도 향상을 위한 연구가 진행되고 있지만 특정 환경이나 시나리오에 초점을 맞추어서 다양한 위치 기반 서비스를 제공하기에는 충분하지 않다. 본 연구에서는 다양한 위치 기반 서비스들이 필요로 하는 위치정보를 구분하고 IrDA를 이용하여 사용자의 위치를 인식하는 방법을 소개하고 위치 인식 시스템의 설치 및 관리에 필요한 기능에 대하여 논한다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.597-599
• /
• 2003

Moving pattern is as a kind of sequential pattern, which can be extracted from the large volume of location history data. This sort of knowledge is very useful in supporting intelligence to the LBS or GIS. In this paper, we proposed the continuous moving pattern mining approach in LBS platform and LBS Miner. The location updates of moving objects affect the set of the rules maintained. In our approach, we use the validity thresholds that indicate the next time to invoke the incremental pattern mining. The mining system will play a major role in supporting the various LBS solutions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.65-71
• /
• 2008

Recently, the research is progressing on the SWE(Sensor Web Enablement) platform of OGC(Open Geospatial Consortium) to provide the sensing data and moving pictures collected in a sensor network through the Internet Web. However, existed research does not deal with moving objects like cars, trains, ships, and person. Therefore, we present a method to deal with integrated sensing data collected by GPS device, sensor network, and image devices. Also, this paper proposes an integrated processing method for image and sensing data based on location in mobile sensor networks. Additionally, according to proposed methods, we design and implement the combine adapter. This combine adapter receives a contexts data, and provides the common interface included parsing, queueing, creating unified message function. We verity the proposed method which deal with the integrated sensing data based on combine adapter efficiently. Therefore, the research is expected to help the development of a various context information service based on location in future.