• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1812-1821
• /
• 2016

The purpose of this study is to survey input data error of ship automatic identification system (AIS) and suggest its improvement. The effects of AIS were observed. Input data error of AIS was investigated by dividing it into dynamic data, static data by targeting actual ships and its improvement method was suggested. The findings are as follows. Looking into accidents before and after AIS is enforced to install on the ship, total collision were decreased after AIS installed. Static data error of AIS took place mainly in the case that ship name, call sign, MMSI, IMO number, ship type, location of antenna (ship length and width) were wrongly input or those data were not input initially. Dynamic data error of AIS was represented by input error of ship's heading. As errors of voyage related data take place as well, confusion is made in sailing or ship condition. Counter measures against the above are as follows. First, reliability of AIS data information should be improved. Second, incessant concern and management should be made on the navigation officers.

• Journal of Korea Multimedia Society
• /
• v.20 no.8
• /
• pp.1200-1207
• /
• 2017

Sensors in a smartphone can be used to measure various physical quantities. In this paper, we propose an object localization scheme in a three dimenstional using a smart phone. The proposed scheme estimates the location of an object by observing it from several different points. The direction to the target object and the locations of the observation points are collected at each observation point using the location sensor and the orientation sensor in the smartphone. Based on these observations, the proposed scheme derives three dimensional line of sight vectors and estimates the location of the target object that minimizes the estimation error. We implemented the proposed scheme on an Android smartphone and tested its performance by estimating the height of a building and characteristics of the proposed approach.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1774-1779
• /
• 2016

This paper proposes a portable cable fault detection system with automatic fault distinction and distance measurement using time-frequency correlation and reference signal elimination method and automatic fault classification algorithm in order to have more accurate fault determination and location detection than conventional time domain refelectometry (TDR) system despite increased signal attenuation due to the long distance to cable fault location. The performance of the developed system method was validated via an experiment in the test field constructed for the standardized performance test of power cable fault location equipments. The performance evaluation showed that accuracy of the developed system is less than 1.34%. Also, an error of automatic fault type and location by detection of phase and peak value through elimination of the reference signal and normalization of correlation coefficient and automatic fault classification algorithm not occurred.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2169-2178
• /
• 2000

This paper proposes the structure of an agent and rules for fault detection and location on LAN. To find out a reason of critical fault incurred LAN, collision detection rule, error detection rule, broadcast detection rule, system location rule, and Internet application location rule ar shown. Also, the structure of multi-agent system and state transition diagram is portrayed to have connectivity with he set of rules. To verify availability of proposed rules, the process to find a faulty system is shown by monitoring and analyzing the LAN fault occurrences from the proposed set of rules. Such an rule based agent system is helpful to an Internet manager to solve a reason of fault and make ad decision from gathering management information.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.10
• /
• pp.542-549
• /
• 2004

The conventional fault location algorithms based on the travelling waves have an inherent problem. In cases of the close-up faults occurring near the relaying point and of the faults having zero degree inception angle of voltage signals, the conventional algorithms can not estimate an accurate fault distance. It is because the shapes of travelling waves are near sinusoidal in those cases. A new method solving this problem is presented in this paper. An FIR(Finite Impulse response) filter which makes high frequency components prominent and makes the power frequency component and dc-offset attenuated is used. With this method, the cross-correlation peak is to be very clear when a close-up fault or a fault having near zero-degree inception angle occurs. The cross-correlation peaks can be clearly distinguished and accurate fault location is practically possible consequently. A series of simulation studies using EMTP(Electromagnetic Transients Program) show that the proposed algorithm can calculate an accurate fault distance having maximum 2% or less error.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.4
• /
• pp.163-170
• /
• 2005

This paper deals with an improved fault location algorithm with compensation ground capacitance through distributed parameter for a long parallel T/L. For the purpose of fault locating algorithm non-influenced by source impedance and fault resistance, the loop method was used in the system modeling analysis. This algorithm uses a positive and negative sequence of the fault current for high accuracy of fault locating calculation. Power system model of 160km and 300km long parallel T/L was simulated using EMTP software. To evaluate of the proposed algorithm, we used the several different cases 64 sampled data per cycle. The test results show that the proposed algorithm was minimized the error factor and speed of fault location estimation.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.319-321
• /
• 2001

When the fault occurred at distribution system, the restoration was late. There are 2 reasons The one is the error of fault location the other is multiple possible candidates of fault location. This paper presents two of new techniques for diagnosing fault regions. The proposed diagnosis scheme is capable of accurately identifying the location of fault upon its occurrence. based on the integration of information available from protective devices and measured load current change at the substation. In this paper expert system for real fault region is presented using these facts. Testing of the developed system using EMTP Simulation Model has demonstrated.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.175-180
• /
• 2012

최근 GPS와 Wi-Fi가 내장된 스마트폰의 보급으로 이를 이용한 위치기반 서비스(Location-based Service)가 발전하고 있다. 하지만 위치기반 서비스들의 오차 범위는 3~4m 내외로 크기 때문에 사용자들은 더 정확한 위치를 제공하기를 바라고 있다. 본 논문에서 위치기반 서비스의 핵심기능을 담당하는 측위기술 중 흔히 사용되고 있는 삼각측량법을 활용하여 핑거프린트 방법의 측위오차를 줄일 수 있는 방안을 연구하였고 프로그램으로 구현한 후 테스트를 실시하였다. 프로그램은 Labview2010으로 구현하였고, 각각의 알고리즘을 모듈화하여 필터링 적용 전 후 및 개선효과를 비교하기 쉽도록 구성하였다. 실내 테스트는 인하대학교의 강의실에서 실시하였고 실외 테스트는 인하대학교 운동장에서 실시하였다. 테스트 결과 실내의 경우 본 논문에서 제시하는 필터링 방법을 적용하기 전의 오차가 1.02미터에서 0.83미터로 감소하였고 실외에서는 0.74미터에서 0.54미터로 오차가 감소하였다.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2016

In this paper, we propose an effective time-of-arrival (TOA)-based localization method with adaptive bias computation in indoor environments. The goal of the localization is to estimate an accurate target's location in wireless localization system. However, in indoor environments, non-line-of-sight (NLOS) errors block the signal propagation between target device and base station. The NLOS errors have significant effects on ranging between two devices for wireless localization. In TOA-based localization, finding the target's location inside the overlapped area in the TOA-circles is difficult. We present an effective localization method using compensated distance with adaptive bias computation. The proposed method is possible for the target's location to estimate an accurate location in the overlapped area using the measured distances with subtracted adaptive bias. Through localization experiments in indoor environments, estimation error is reduced comparing to the conventional localization methods.

• Journal of KIISE:Databases
• /
• v.31 no.5
• /
• pp.479-491
• /
• 2004

Location information of mobile objects is applied to vehicle tracking, digital battlefields, location based services, and telematics. Their location coordinates are periodically measured and stored in the application systems. The linear function is mainly used to estimate the location information that is not in the system at the query time point. However, a new method is needed to improve uncertainties of the location representation, because the location estimation by linear function induces the estimation error. This paper proposes an application method of the cubic spline interpolation in order to reduce deviation of the location estimation by linear function. First, we define location information of the mobile object moving on the two-dimensional space. Next, we apply the cubic spline interpolation to location estimation of the proposed data model and describe algorithm of the estimation operation. Finally, the precision of this estimation operation model is experimented. The experimentation comes out more accurate results than the method by linear function, although the proposed location estimation function uses the small amount of information. The proposed method has an advantage that drops the cost of data storage space and communication for the management of location information of the mobile objects.