• 전기학회논문지
• /
• 제56권9호
• /
• pp.1543-1548
• /
• 2007

This paper reports a study on determination of the adequate location of 100 MVA STATCOM regarding the transfer capability enhancement on the metropolitan interface as well as the economy in system operation. The base case in the study was established considering a scenario of the energy support to North Korea from the KEPCO (Korea Electric Power Corporation) system through a HVDC interconnection. In the base case, the energy support was approximately modeled with a load of 1500 MW, and by the load addition, the system was weakened in terms of voltage stability and transfer capability. After a thorough investigation on the case, the location of the STATCOM was decided to compensate the reactive deficit of the modified system and to maximize the operational benefit which can be estimated by FV analysis.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.41-47
• /
• 2017

Recent studies have shown that there are various systems which can be used to monitor hazardous area in a debris flow location, but lack of methodological research on the exact location where each instrument should be installed has hindered the success of this systems. The objective of this study is to suggest the measurement system for monitoring debris-flow and propose the effective method to determine location of measurement system. Previously studied, from 1991 to 2015, were referred and the applied ratio of every instrument was investigated. The measurement information was divided into 8 categories including rainfall, debris-flow velocity, displacement, fluid pore pressure, ground vibration, image processing, impact force and peak flow depth. The result of this study revealed that the most applied instruments to be rain gauge and geophone for measuring average rainfall and ground vibration respectively. The Analytic Hierarchical Process (AHP) method was selected to determine installation location of instrument and the weighting factors were estimated through fine content, soil thickness, porosity, shear strength, elastic modulus, hydraulic conductivity and saturation. The soil thickness shows highest weights and the fine content relatively demonstrates lowest weights. The score of each position can be calculated through the weighting factors and the lowest score position can be judged as the weak point. The weak point denotes the easily affecting area and thus, the point is suitable for installing the measurement system. This study suggests a better method for safely managing the debris-flow through a precise location for installing measurement system.

• 대한원격탐사학회지
• /
• 제23권5호
• /
• pp.465-471
• /
• 2007

Many hospitals have been considering new technology such as wireless sensor network(WSN). The technology can be used to track the location of medical devices needed for inspections or repairs, and it can also be used to detect of a theft of an asset. In an asset-tracking system using WSN, acquiring the location of moving sensor nodes inherently introduces uncertainty in location determination. In fact, the sensor nodes attached to an asset are prone to failure from lack of energy or from physical destruction. Therefore, even if the asset is located within the predetermined area, the asset-tracking application could "misunderstand" that an asset has escaped from the area. This paper classifies the causes of such unexpected situations into the following five cases: 1) an asset has actually escaped from a predetermined area; 2) a sensor node was broken; 3) the battery for the sensor node was totally discharged; 4) an asset went into a shadow area; 5) a sensor node was stolen. We implemented and installed our asset-tracking system in a hospital and continuously monitored the status of assets such as ventilators, syringe pumps, wheel chairs and IV poles. Based on this real experience, we suggest how to differentiate each case of location uncertainty and propose possible solutions to prevent them.

• 한국BIM학회 논문집
• /
• 제11권2호
• /
• pp.43-53
• /
• 2021

The 'public agency oil joint purchase system' was introduced to lower public sector oil prices and contribute to the stability of the overall consumer oil market. The present study used spatial regression to analyze the factors affecting domestic gasoline price, focusing on the impact of potential implicit collusion among gas stations in determining domestic gasoline prices. Also, this study investigated the effect the location characteristics of the market convention gas stations and government offices on the pressure of price competition in the market and the gasoline price at general gas stations. To summarize the results of the spatial lag model (SLM), the individual characteristics of gas stations such as convenience stores (+), self-fuelling (-), commercial areas (+), subway stations (+), population density (-), and sales (-) are correlated to gasoline prices at gas stations, and the institutional location factors of gas stations (+) affected the average of 9 won per liter, 11 won per liter. In order to solve these problems, the establishment of a monitoring system reflecting the location characteristics of the region and the ongoing review of the system should be carried out. In addition, separate, expanded and promotional measures should be prepared for the convenience of general and public oil buyers.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.90-96
• /
• 2011

Congestion management is one of the most challenging aspects in the recently deregulated electricity markets. FACTS devices have been shown to be an efficient alternative to control the flow of power in lines, resulting in increased loadability, lower system loss and a reduced cost of production. In this paper, the application of a static series synchronous compensator (SSSC) for the purpose of congestion management of power systems has been studied. A sensitivity-based analysis method is utilized for effective determination of the SSSC location in an electricity market. The method is topology based and it is independent of the system operation point. A power injection p-model is developed for the SSSC in this study. Numerical results based on the modified IEEE 14 bus system with/without the SSSC demonstrate the feasibility as well as the effectiveness of the SSSC for congestion management in a network. The results obtained when using the SSSC to improve system transfer capability and congestion management is encouraging.

• 한국전자통신학회논문지
• /
• 제6권3호
• /
• pp.433-438
• /
• 2011

본 논문에서는 이동통신망을 이용한 WiFi 위치 측위기술 및 서비스에 대해 소개해 보고자 한다. 또한, 본 논문에서는 이동통신망을 이용한 WPS(WiFi Positioning System)의 기본적인 기술요소 및 품질요소 등을 살펴보고자 한다. 위 이동통신 기반의 위치서비스를 제공할 때 단말의 위치 결정 기술을 통하여 사용자 또는 가입자에게 편리성을 제공해 줄 뿐만 아니라 위치기반서비스 산업활동에 대하여 많은 기여를 할 것으로 본다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.804-807
• /
• 1996

This paper addresses the small-signal stability and control problems associated with a Static Var Compensator and its power system stabilizer. The major emphasis is on determination of suitable location for SVC arid stabilizer signal tuning through eigenvalues and frequency response techniques. To determinate of suitable location for SVC, this paper used transfer function residues. Adequate oscillation damping is achieved by the use of stabilizing signals, designed through frequency response techniques and added to SVC. The study system is Benchmark System.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.317-322
• /
• 1992

Developed in this reseach is a CAM system for 5-axis NC Machining of sculpture surfaces. We identify problems in generating 5-axis NC data and propose methods of overcoming them. Issues discussed in this report are; kinematic modelling of NC machines; Determination of cutter position(location and orientation); check of machine work-range; linear trajectory planning; calculation of feedrate number. The proposed system has been implemented in FORTRAN77 on the Personal IRIS EWS, and it also consitutes a module of the CAD/CAM system 'CASSETTE' developed in KIST CAD/CAM lab..

• 오토저널
• /
• 제14권3호
• /
• pp.57-70
• /
• 1992

As automobile industry develope, design techniques to satisfy light weight and high efficiency in automobile parts is demanded. In this study modal analysis is performed using transfer matrix method to identify dynamic characteristics of exhaust system. It is estimated the theoretical transfer function by Pestel-Leckey method and the mode shapes in 3-D graphic. the validity of developed program is verified by comparing with the experimental results of exhaust system. Estimated modal parameters(natural frequency, vibrational mode, transfer function) are in accord with the experimental results. From the developed program, we can predict a location of the hanger which is determined by the lowest RMS value point, when displacement is given as an input at the engine side. We can find that attachment of spring modelled hanger at the hanger location bring vibration level down.

• 한국통신학회논문지
• /
• 제40권1호
• /
• pp.165-170
• /
• 2015

본 논문은 3D 위치 정보를 산출하기 위한 기압고도계 및 기준국을 이용한 절대 고도 측정 정확도 향상에 관한 연구이다. GPS와 같은 위성 항법 시스템이 신뢰성이 있는 절대 고도를 제공하지 못하는 점과 기압 고도계가 변화하는 대기압의 특성상 절대 고도 정보를 제공하지 못한다는 문제점을 인식하고, 이를 개선하기 위해 새로운 기법을 제안하였다. 제안된 기법을 검증하기 위해 RTK를 활용한 기준국을 지정하고 시중에 판매하는 압력 센서 및 EVK 단말기를 활용하였으며, 실내 외에서의 사람의 이동으로 인한 고도 변화 실험과 차량을 이용한 이동 실험을 통해 검증하였다. 이 논문의 결과는 기준국을 이용하는 기존의 2D 측위 시스템을 간단히 3D 측위 시스템으로 확장할 수 있는 저가 솔루션을 제공할 수 있음을 보였다.