• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.378-382
• /
• 2005

The opening of high speed railway upgraded our land transportation speed limit, causing lots of changes including living and culture and also paving the way for stepping up the railway technology. However, it is also true that we had a limit to adopt the existing railway system structured for 150km/h to the new structure requiring a higher speed of approximate 300km/h due to technological, based on the time and experience. More importantly, heading toward a step of operating such a high speed railway system, it has been practically and quickly proposed that the railway needs high speed railway engineering, maintenance technology of parts of the vehicles to have a stable maintenance foundation and localization of major parts. Therefore, this study was intended to research the actual displacement characteristics in runningg on an actual track for the purpose of developing the protective and maintenance technology of springs and dampers, which are core parts among suspension elements of a high speed railway vehicle. For this, it was researched the actual vehicle test and its interpretation centered on primary spring, which is used for the suspension system of a bogie, body-body dampers and body-bogie yaw damper. Also, to analyze the displacement characteristics of suspension system in the actual conditions of high speed railway vehicles, a vehicle‘s dynamic characteristics was analyzed and interpreted. At the same time, a tester for measuring the actual displacement of such suspension elements was designed and attached to actual vehicles, to measure the displacements that occur in running it on the Seoul-Busan line, one of major lines serviced by KTX. The displacement data gained from the test with actual vehicles was analyzed for its displacement distribution depending on the service sections and frequency, with which the valuable data necessary for any potential breakdown or maintenance in the future could be obtained.

• 국제지역연구
• /
• 제21권1호
• /
• pp.163-179
• /
• 2017

미국이 이란에 대한 1차 제재를 제외한 나머지 경제제재를 해제함에 따라 이란은 글로벌 자동차기업들의 해외직접투자 대상으로 급부상했다. 이 연구는 이런 배경에서 한국의 자동차산업이 이란에 진출하는 방법에 대한 전략적 제안을 하고 있다. 이를 위해 이란의 자동차산업과 이란의 특징에 대해 먼저 탐구하였으며, 시장 상황에 대한 정량적 정성적 분석을 하고 있다. 승용차부문에서, 한국의 완성차기업들은 미-이란 관계의 진전을 좀 더 지켜보면서 대신 CKD를 수출하는 것이 바람직할 것으로 보인다. 그러나 이란 정부가 CKD의 수출만으로는 만족하지 못할 것이므로, 부품회사들은 미리 진출시키는 것이 바람직할 것이다. 부품회사들의 경우에는 해외직접투자, 라이센스 방식의 진출, 그리고 합작기업의 형태가 모두 가능하다. 이를 통해 자동차기업들은 부품현지화 비율 규제를 만족시킬 수 있다. 이렇게 투자한 부품회사들은 나중에 조건이 호전되어 완성차기업들이 진출했을 때 현지의 서플라이 체인 구축에 핵심역할을 하게 될 것이다. 또 이란에 구축하게 될 자동차 생산기반은 이란을 넘어서 중동-북아프리카 지역의 수출전략기지화 하는 것도 제안할 수 있다. 수출기지화 한다면 동유럽에 구축된 생산기반과 역할 분담 모델이 필요할 것이다. 이런 전략은 전체적으로 보면 부품우선진출 전략이라고 할 수 있을 것이다. 상용차부문의 경우, 천연가스산업을 이란에 진출하는 전략적 고리로 사용할 것을 제안한다. 이란 정부는 천연자원 개발을 강력하게 희망하고 있다. 따라서 완성차기업들은 CNG버스를 생산하고 에너지기업들은 천연가스를 시굴 생산하는 연계진출 방안이다.

• 전기학회논문지P
• /
• 제58권1호
• /
• pp.62-66
• /
• 2009

In this paper, A localized electromotion scooter controller for the senior and disabled is developed. Recently, the population which uses the electromotion wheel chair or electromotion scooter is increasing. The reason is that the electromotion wheel chair and electromotion scooter were newly applied in medical treatment grant item. In the whole world, electromotion scooter controller is coming to be produced above a hundred of millions. The products produced are consuming from most Europe and North America. the demand is increasing rapidly in Korea. The electromotion scooter which is sold to domestic is about 40,000 units, and about 70% or more in the products are imported from the foreign nation. Also controller for electromotion scooter uses the foreign nation product. Consequently, as the localized electromotion scooter controller is developed, it will be able to expect an income substitution effect, and apply to the agriculture and leisure mobile equipment parts.

• Tribology and Lubricants
• /
• 제28권3호
• /
• pp.112-116
• /
• 2012

wet-type multiple disk brakes are very important parts of turning decelerator for deck crane, because they are advanced in durability and braking power, and can be designed compactly. Thus, we designed and made wet-type multiple disk brakes of turning decelerator for deck crane to be localization of these imported all. In this study, wet multiple disk brakes were made a comparative test with the 2 types materials of friction disk by the SAE No.2 dynamometer. The friction characteristics were measured and analyzed to decide a suitable material as wear depth of friction disk and dynamic and static friction coefficient.

• 로봇학회논문지
• /
• 제2권4호
• /
• pp.289-296
• /
• 2007

The docking and recharging system for a mobile robot must guarantee the ability of the mobile robot to perform its tasks continuously without human intervention. In this paper, two docking mechanisms are proposed with localization error-compensation capability for the auto recharging system. Friction forces or magnetic forces are used between the docking parts of the docking module and those of the docking station. In addition, an auto recharging system is developed to control the power. Since the system is modularized, it can easily be adapted to other robots.

• Earthquakes and Structures
• /
• 제15권5호
• /
• pp.463-471
• /
• 2018

The virtual forces of the original local flexibility method are restricted to inducing stress on the local parts of a structure. To circumvent this restriction, we developed a pseudo local flexibility (PLFM) method that can successfully detect damage to hyperstatic beam structures using fewer modes. For this study, we further developed the PLFM so that it could detect damage in plate structures. We also devised the theoretical background for the PLFM with non-local virtual forces for plate structures, and both the lateral and rotary degree of freedom (DOF) measurements were considered separately. This study investigates the effects of the number of modes, the actual location that sustained damage, multiple damage locations, and noise in modal parameters for the damage detection results obtained from damaged numerical plates. The results revealed that the PLFM can be used for damage detection, localization, and quantification for plate structures, regardless of the use of the lateral DOF and/or rotary DOF.

• Tribology and Lubricants
• /
• 제25권6호
• /
• pp.381-386
• /
• 2009

In general, a brake system of axle for heavy duty machine as a wheel excavator makes use of wettype multiple disk brakes. These disk bakes are very important parts of heavy duty machine because they are dvanced in durability and braking power, and can be designed compactly. Thus, we adesigned and made wettype multiple disk brakes of axle for the wheel excavator to be localization of these imported all. In this study, wet multiple disk brakes were made a comparative test with the 3 types materials of friction disk by the SAE No.2 dynamometer. The friction characteristics were measured and analyzed to decide a suitable material as wear depth of friction disk and dynamic and static friction coefficient on temperature of oil and applied pressure.

• Journal of Plant Biology
• /
• 제32권4호
• /
• pp.285-292
• /
• 1989

The intracellular localizations of polyamines and their related enzymes were investigated from young spinach leaves. Polyamines were present in all parts of plant cells, both in the subcellular organelles and in the soluble fraction of cytoplasm, however, polyamines were mainly located in the cytosolic fraction. Most activities of L-arginine decarboxylase(ADC) and L-ornithine decarboxylase(ODC), two important enzymes of putrescine and polyamine biosynthesis, were detected in cytosol fraction, while in subcellular organelles the activities were very low. Activities of diamine oxidase(DAO) and polyamine oxidase(PAO), the catabolic enzyme of diamine and polyamine, were not detected in spinach leaves. It was suggested that polyamines and their related synthetic enzymes were located in the soluble fraction of cytoplasm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.127.5-127
• /
• 2001

The 3-dimensional measuring machine by using an ultrasonic sensor is used one of the NDE (Nondestructive Evaluation). It is applied to the inspection of pipelines, boreholes, pressure vessel and tank, and so on. On particular when a harsh environment prohibits the use of moving mechanical parts. The 3-dimensional measuring machine by using an ultrasonic sensor, which measure 1-dimensional information and 2-dimensional information simultaneously from a target of inspection, and then re construct 3-dimensional information. So we can find the situation in progress and predict remaining life and corrosion without destructive examination. It´s a point of excellence that the 3-dimensional measuring machine is portable.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.193-197
• /
• 2002

Polyurethane casting wing fairings included in F-5E/F 15% spar kit are to be installed on aircraft wing surfaces and used for compensating the changes of the aerodynamic configuration by the leading edge extension fairings. These fairing are mandatory items in repairing wing areas and was imported from foreign supplier with long term delivery and high cost. Accordingly, local manufacturing is necessary to get rid of above disadvantages such as long term delivery and high cost. Basic properties test of specimen to be developed and part's requirements after localization was taken and its values were similar or higher when comparing with the original's even in low temp test at -55C. Casting mold process was used to manufacture the polyurethane fairings and its demensional stability ＆ physical condition was proper and met to the related specification and drawing's requirements