• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.54-59
• /
• 2010

This paper present to study the guidance system as localization technique using sensor fusion and line tracking technique using virtual line for AGV(autonomous guided vehicle). An existing AGV could drive on decided line only. And representative guidance systems of such guidance system are magnet-gyro guidance and wired guidance. However, those have had the high cost of installation and maintenance, and the difficulty of system change according to variation of working environment. To solve such problems, we make the localization system which is fused with a laser navigation and gyro, encoder. The system is robust against noise, and flexible according to working environment through sensor fusion. For line tracking of laser navigation without wire guidance, we set the virtual line in program, and design the driving controller based on difference of angle and distance between AGV's position and decided virtual line. To experiment, we use the AGV which is made by ourselves, and experiment the line tracking repeatedly on same experimental environment. In result, maximum distance error between decided virtual line and AGV's position was less than 49.93mm, and we verified that the proposed system is efficient for line tracking of actual AGV.

• Journal of Internet of Things and Convergence
• /
• v.10 no.4
• /
• pp.101-108
• /
• 2024

Indoor localization is a critical component for numerous applications, ranging from navigation in large buildings to emergency response. This paper presents an enhanced Pedestrian Dead Reckoning (PDR) scheme using smartphone sensors, integrating neural network-aided motion recognition, Kalman filter-based error correction, and multi-sensor data fusion. The proposed system leverages data from the accelerometer, magnetometer, gyroscope, and barometer to accurately estimate a user's position and orientation. A neural network processes sensor data to classify motion modes and provide real-time adjustments to stride length and heading calculations. The Kalman filter further refines these estimates, reducing cumulative errors and drift. Experimental results, collected using a smartphone across various floors of University, demonstrate the scheme's ability to accurately track vertical movements and changes in heading direction. Comparative analyses show that the proposed CNN-LSTM model outperforms conventional CNN and Deep CNN models in angle prediction. Additionally, the integration of barometric pressure data enables precise floor level detection, enhancing the system's robustness in multi-story environments. Proposed comprehensive approach significantly improves the accuracy and reliability of indoor localization, making it viable for real-world applications.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.6
• /
• pp.619-625
• /
• 2009

FastSLAM which uses the Rao-Blackwellized particle filter is one of the famous solutions to SLAM (Simultaneous Localization and Mapping) problem that estimates concurrently a robot's pose and surrounding environment. However, the particle depletion problem arises from the loss of the particle diversity in the resampling process of FastSLAM. Then, the performance of FastSLAM degenerates over the time. In this work, DIR (Density Information-based Resampling) technique is proposed to solve the particle depletion problem. First, the cluster is constructed based on the density of each particle, and the density of each cluster is computed. After that, the number of particles to be reserved in each cluster is determined using a linear method based on the distance between the highest density cluster and each cluster. Finally, the resampling process is performed by rejecting the particles which are not selected to be reserved in each cluster. The performance of the DIR proposed to solve the particle depletion problem in FastSLAM was verified in computer simulations, which significantly reduced both the RMS position error and the feature error.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.5
• /
• pp.731-739
• /
• 2008

The docking and recharging system for a mobile robot must guarantee the ability to perform its tasks continuously without human intervention. This paper proposes two docking mechanisms with localization error-compensation capability for an auto recharging system. The mechanisms use friction forces or magnetic forces between the docking parts of the robot and those of the docking station. It is a structure to improve the allowance ranges of lateral and directional docking offsets, in which the robot is able to dock into the docking station. In this paper, auto-recharging system and the features of the proposed mechanisms are verified with experimental results using simple homing method.

• ETRI Journal
• /
• v.43 no.4
• /
• pp.603-616
• /
• 2021

Over the last few years, autonomous vehicles have progressed very rapidly. The odometry technique that estimates displacement from consecutive sensor inputs is an essential technique for autonomous driving. In this article, we propose a fast, robust, and accurate odometry technique. The proposed technique is light detection and ranging (LiDAR)-based direct odometry, which uses a spherical range image (SRI) that projects a three-dimensional point cloud onto a two-dimensional spherical image plane. Direct odometry is developed in a vision-based method, and a fast execution speed can be expected. However, applying LiDAR data is difficult because of the sparsity. To solve this problem, we propose an SRI generation method and mathematical analysis, two key point sampling methods using SRI to increase precision and robustness, and a fast optimization method. The proposed technique was tested with the KITTI dataset and real environments. Evaluation results yielded a translation error of 0.69%, a rotation error of 0.0031°/m in the KITTI training dataset, and an execution time of 17 ms. The results demonstrated high precision comparable with state-of-the-art and remarkably higher speed than conventional techniques.

• ETRI Journal
• /
• v.43 no.2
• /
• pp.209-220
• /
• 2021

The filtered orthogonal frequency division multiplexing (F-OFDM) system has been recommended as a waveform candidate for fifth-generation (5G) communications. The suppression of out-of-band emission (OOBE) and asynchronous transmission are the distinctive features of the filtering-based waveform frameworks. Meanwhile, the high peak-to-average power ratio (PAPR) is still a challenge for the new waveform candidates. Partial transmit sequence (PTS) is an effective technique for mitigating the trend of high PAPR in multicarrier systems. In this study, the PTS technique is employed to reduce the high PAPR value of an F-OFDM system. Then, this system is compared with the OFDM system. In addition, the other related parameters such as frequency localization, bit error rate (BER), and computational complexity are evaluated and analyzed for both systems with and without PTS. The simulation results indicate that the F-OFDM based on PTS achieves higher levels of PAPR, BER, and OOBE performances compared with OFDM. Moreover, the BER performance of F-OFDM is uninfluenced by the use of the PTS technique.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4408-4428
• /
• 2019

Due to the rapid advancement in smart phones, numerous new specifications are developed for variety of applications ranging from health monitoring to navigations and tracking. The word indoor navigation means location identification, however, where GPS signals are not available, accurate indoor localization is a challenging task due to variation in the received signals which directly affect distance estimation process. This paper proposes a hybrid approach which integrates fingerprinting based K-Nearest Neighbors (K-NN) and lateration based MinMax position estimation technique. The novel idea behind this hybrid approach is to use Euclidian distance formulation for distance estimates instead of indoor radio channel modeling which is used to convert the received signal to distance estimates. Due to unpredictable behavior of the received signal, modeling indoor environment for distance estimates is a challenging task which ultimately results in distance estimation error and hence affects position estimation process. Our proposed idea is indoor position estimation technique using Bluetooth enabled smart phones which is independent of the radio channels. Experimental results conclude that, our proposed hybrid approach performs better in terms of mean error compared to Trilateration, MinMax, K-NN, and existing Hybrid approach.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.72-81
• /
• 2023

We introduce tightly-coupled GNSS-LiDAR-Inertial state estimator, which is capable of SLAM (Simultaneously Localization and Mapping) and autonomous driving. Long term drift is one of the main sources of estimation error, and some LiDAR SLAM framework utilize loop closure to overcome this error. However, when loop closing event happens, one's current state could change abruptly and pose some safety issues on drivers. Directly utilizing GNSS (Global Navigation Satellite System) positioning information could help alleviating this problem, but accurate information is not always available and inaccurate vertical positioning issues still exist. We thus propose our method which tightly couples raw GNSS measurements into LiDAR-Inertial SLAM framework which can handle satellite positioning information regardless of its uncertainty. Also, with NLOS (Non-light-of-sight) satellite signal handling, we can estimate our states more smoothly and accurately. With several autonomous driving tests on AGV (Autonomous Ground Vehicle), we verified that our method can be applied to real-world problem.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.146-151
• /
• 2013

With the development of mobile internet, requirements of positioning accuracy for the LBS (Location Based Service) are becoming more and more higher. The LBS is based on the position of each mobile device. So, it requires a proper acquisition of accurate user's indoor position. Thus indoor positioning technology and its accuracy is crucial for various LBS. In general, RSSI (Received Signal Strength Indicator) measurements are used to obtain the position information of mobile unit under WLAN environment. However, indoor positioning error increases as multiple AP's configurations are becoming more complex. To overcome this problem, an enhanced indoor localization method by AP (Access Point) selection criteria adopting DOP (Dilution of Precision) is proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.241-244
• /
• 1997

A dead reckoning navigation system is developed for autonomous mobile robot localization. The navigation system was implemented by novel sensor fusion using a Kalman filter. A differential encoder and the gyroscope error models are developed for the filter. An indirect Kalman filter scheme is adopted to reduce the computational burden and to enhance the navigation system reliability. The filter mutually compensates the encoder errors and the gyroscope errors. The experimental results show that the proposed mobile . robot navigation algorithm provides the reliable position and heading angle of the mobile robot without any help of the external positioning systems.